Skip to content

@nxp-appcodehub NXP Application Code Hub

Change the repository type filter

All

    Repositories list

    150 repositories

    • dm-wifi-cli-frdm-mcxn947

      Public
      This is an example of cli use with wifi on frdm-mcxn947
      C
      •
      Other
      •0•0•0•0•Updated Jan 28, 2025Jan 28, 2025

    • ap-frdm-mcx-buspal

      Public
      This software pack provides the buspal application ported to different MCX device families. Buspal is an embedded software tool that is available as a companion to blhost. The tool acts as a bus translator with an established connection with blhost over UART and with the target device over I2C, SPI or CAN
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • dm-mikroe-knob-g-click-frdm

      Public
      Demo is an example for MIKROE Knob G Click module in FRDM boards with CMSIS driver and NXP HAL Software.
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • dm-mikroe-4x4-key-click-frdm

      Public
      Demo is an example for MIKROE 4x4 Key Click module in FRDM boards with CMSIS driver and NXP HAL Software.
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • dm-mikroe-relay5click-frdm

      Public
      Demo is an example for Mikroe Relay 5 click module in FRDM boards usign CMSIS driver for I2C comunication, and GPIO component.
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • dm-mikroe-oledbclick-frdm

      Public
      Demo is an example for Mikroe OLED B click module in FRDM boards with CMSIS driver and GPIO adapter.
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • dm-mikroe-joystick2click-frdm

      Public
      Demo is an example for Mikroe Joystick 2 Click module in FRDM boards with CMSIS driver and GPIO adapter.
      C
      •
      Other
      •0•0•0•0•Updated Jan 23, 2025Jan 23, 2025

    • an-mc-bldc-lpc86x

      Public
      This application note demonstrates six-step square wave BLDC motor control on the LPCXpresso860-MAX based on the NXP LPCXpresso86x processor.
      0•0•0•0•Updated Jan 22, 2025Jan 22, 2025

    • an-pmsm-one-shunt-lpc86x

      Public
      This application note describes the implementation of sensorless FOC application on the LPCXpresso860-MAX based on the NXP LPCXpresso86x processor. The phase current is reconstruct by bus current.
      0•0•0•0•Updated Jan 22, 2025Jan 22, 2025

    • an-kw4x-bluetooth-le-nfc-integration

      Public
      This software accompanies application note [AN13953], which gives instructions on how to create a Bluetooth Low Energy project for the EVK-KW45 development board and MCUXpresso IDE, and how to integrate NFC Reader Library.
      C
      •
      Other
      •0•0•0•0•Updated Jan 21, 2025Jan 21, 2025

    • an-mcxn947-camera-interface-by-smartdma

      Public
      This software accompanies application note [AN14191](https://www.nxp.com.cn/docs/en/application-note/AN14191.pdf).This application note describes the parallel interface for the camera solution in MCXN947 andMCXN236. It includes the introduction of camera interface, features, API routines, and demo.
      0•0•0•0•Updated Jan 20, 2025Jan 20, 2025

    • dm-nafe13388-application-examples

      Public
      This is a demo application which provides a command line interface for these 6 applications of NAFE13388 for Analog to Digital Conversion.<br>Current Sensing using SCSR Conversion Voltage Sensing using SCSR Conversion Voltage Sensing using MCMR Conversion RTD 2/4 Wires using SCCR Conversion Weight Scale
      C
      •
      BSD 3-Clause "New" or "Revised" License
      •0•0•0•0•Updated Jan 17, 2025Jan 17, 2025

    • dm-motor-control-demo-for-i-mx93

      Public
      Implementation of motor control algorithms using the MCIMX93-EVK development kit. It includes hardware configuration details, setup instructions, and an overview of the software implementation process.
      C
      •
      Other
      •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

    • dm-snoring-detection-based-on-rt1060

      Public
      The snoring detection demo is based on the i.MX RT1060. WAV audio files can be played via the speaker and processed in a ML model to determine if there's snoring. The results are shown on a GUI designed with LVGL.
      C
      •
      Other
      •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

    • dm-tss-powered-on-device-learning-fan-anomaly-based-on-mcxa156

      Public
      Time Series Studio powered, on-device learning Fan anomaly detection based on FRDM-MCXA156
      C
      •
      Other
      •0•0•0•0•Updated Jan 16, 2025Jan 16, 2025

    • dm-mcxn-bubble-level-demo

      Public
      This demo shows how to integrate the NXP sensors FXLS8971CF (3-axis accelerometer) with FRDM-MCXN947 platform. In this application the FXLS8971CF is hosted and an I2C peripheral on an “Inclinometer 4 Click” board from Mikroe.
      C
      •
      Other
      •0•0•0•0•Updated Jan 15, 2025Jan 15, 2025

    • an-mcxn236-usb-bridge-to-i3c

      Public
      This is the complementary project for [AN14434](https://www.nxp.com.cn/docs/en/application-note/AN14434.pdf), which demonstrates how implement usb to i3c demo on MCXN236.In the MCXN236 USB to I3C demo, the USB device uses USB CDC virtual com class to communicate with PC host. You can use terminal tool to send a serial data to control I3C interface.
      0•0•0•0•Updated Jan 15, 2025Jan 15, 2025

    • dm-mcxc444-lcd-and-fxls8974cf-motion-detection

      Public
      This example use FRDM-MCXC444 and on-board FXLS8974CF accelerometer to demonstrate autonomous motion detection of motion and direction, also this demo shows the board direction on the on board LCD display.
      C
      •
      Other
      •0•0•0•0•Updated Jan 14, 2025Jan 14, 2025

    • dm-wifi-lcd-connect-frdm-mcxn947

      Public
      This is a demo example of Wi-Fi connect using LCD interface on FRDM-MCXN947 using Wi-Fi module AW-AM510.
      C
      •
      Other
      •0•0•0•0•Updated Jan 13, 2025Jan 13, 2025

    • dm-tamper-detection-using-low-power-wakeup-sensor-over-ble

      Public
      This example demo describes how to configure low-power motion or magnetic wake-up sensor for tamper/theft detection and transmit ALERT to connected end user via BLE wireless UART using FRDM-MCXW71.Such use-case can find many applications where user would like to completely shut off power supply or put the device in power down mode etc.
      C
      •
      Other
      •0•1•0•0•Updated Jan 13, 2025Jan 13, 2025

    • dm-fashion-mnist-recognition-on-mcxn947

      Public
      Toy doll recognition base on machine learning algorithm, power by MCXN-947.
      C
      •
      Other
      •0•0•0•0•Updated Jan 6, 2025Jan 6, 2025

    • dm-label-cifar10-images-on-mcxn947

      Public
      Label the CIFAR10 images from the camera on FRDM-MCXN947
      C
      •
      Other
      •1•0•0•0•Updated Jan 6, 2025Jan 6, 2025

    • dm-multiple-face-detection-on-mcxn947

      Public
      This demo demonstrates the AI capabilities of the mcxn947. It displays the image captured by the camera on the LCD screen and performs face detection.
      C
      •
      Other
      •2•7•2•0•Updated Jan 6, 2025Jan 6, 2025

    • dm-multiple-person-detection-on-mcxn947

      Public
      C
      •
      Other
      •1•1•0•0•Updated Jan 6, 2025Jan 6, 2025

    • an-mcxn947-mdio-slave-interface-by-smartdma

      Public
      This software accompanies the application note primarily introduces how to implement MDIOI slave interface functionality using SmartDMA
      C
      •
      Other
      •0•0•0•0•Updated Jan 2, 2025Jan 2, 2025

    • dm-pca9420uk-evm-pmic-for-low-power-application

      Public
      The PCA9420 is a highly integrated Power Management IC (PMIC), targeted to provide a full power management solution for low-power microcontroller applications or other similar applications. The device consists of a linear battery charger capable of charging up to 315 mA current.
      C
      •
      BSD 3-Clause "New" or "Revised" License
      •0•0•0•0•Updated Dec 23, 2024Dec 23, 2024

    • an-mc-bldc-ke17z

      Public
      This application note demonstrates how to implement the six-step commutation control of brushless direct current(BLDC) motor on KE17Z512 and KE17Z256 MCUs. The NXP Freedom board FRDM-MC-LVBLDC is used as a hardware platform for the motor control reference solution. The hardware-dependent part of the motor control software is addressed as well.
      C
      •
      Other
      •0•0•0•0•Updated Dec 18, 2024Dec 18, 2024

    • an-emulating-i2s-bus-with-flexio-on-mcxa156

      Public
      This application note describes how to emulate I2S interface with FlexIO on MCXA156 and implement a USB speaker device on MCXA156. The audio function is tested using the codec on LPCXpress55s69 board.
      C
      •
      Other
      •0•0•0•0•Updated Dec 16, 2024Dec 16, 2024

    • dm-lpc5536-evse-sigbrd

      Public
      The EVSE-SIG-BRD is an add-on development board that supports electric vehicle supply equipment (EVSE) platform development. The board also supports the proximity pilot, ground fault circuit interrupter (GFCI), and relay drive features. The main host of the system is on a separate processor development board
      C
      •
      Other
      •0•0•0•0•Updated Dec 13, 2024Dec 13, 2024

    • an-flash-memory-swap-feature-on-ke17z512

      Public
      The flash swap function, which is accessible on certain Kinetis microcontroller components, serves as a strong tool for dependable software enhancements. This document discusses how to employ the swap feature effectively. Frequently asked queries are responded to, and a practical use case is illustrated.
      C
      •
      Other
      •0•0•0•0•Updated Dec 13, 2024Dec 13, 2024