This is an example of cli use with wifi running on serial terminal in frdm-mcxn947, this example has many test options for wifi. There are the options:
-help
-wlan-version
-wlan-mac
-wlan-scan
-wlan-scan-opt ssid <ssid> bssid ...
-wlan-add <profile_name> ssid <ssid> bssid...
-wlan-remove <profile_name>
-wlan-list
-wlan-connect <profile_name>
-wlan-start-network <profile_name>
-wlan-stop-network
-wlan-disconnect
-wlan-stat
-wlan-info
-wlan-address
-wlan-get-uap-channel
-wlan-get-uap-sta-list
-ping [-s <packet_size>] [-c <packet_count>] [-W <timeout in sec>]<ip_address>
-iperf [-s|-c <host>|-a|-h] [options]
-dhcp-stat
- Connect a USB type C cable between the PC host and the CMSIS DAP USB port on the board
- Open a serial terminal with the following settings:
- 115200 baud rate
- 8 data bits
- No parity
- One stop bit
- No flow control
- Set jumpers of AW-AM510 module.
- Connect the Wi-Fi module.
- Download the program to the target board.
- Either press the reset button on your board or launch the debugger in your IDE to begin running the demo.
- Add CLI init API in applications main function.
- Add WLAN CLI init API once WLAN Connection Manager gets initialized correctly.
- When the demo starts, a welcome message would appear on the terminal, press enter for command prompt:
========================================
wifi cli demo
========================================
Initialize CLI
========================================
CLI Build: Jan 23 2025 [08:07:52]
Copyright 2024 NXP
MCU Board: MCX-N9XX-EVK
========================================
Initialize WLAN Driver
========================================
STA MAC Address: 1C:CE:51:96:D5:FD
app_cb: WLAN initialized
========================================
WLAN CLIs are initialized
========================================
ENHANCED WLAN CLIs are initialized
========================================
CLIs Available:
========================================
Type help to list out all available CLI commands.
help
clear
wlan-version
wlan-mac
wlan-thread-info
wlan-net-stats
wlan-set-mac <MAC_Address>
wlan-scan
wlan-scan-opt ssid <ssid> bssid ...
wlan-add <profile_name> ssid <ssid> bssid...
wlan-remove <profile_name>
wlan-list
wlan-connect <profile_name>
wlan-connect-opt <profile_name> ...
wlan-reassociate
wlan-start-network <profile_name>
wlan-stop-network
wlan-disconnect
wlan-stat
wlan-info
wlan-address
wlan-uap-disconnect-sta <mac address>
wlan-get-uap-channel
wlan-get-uap-sta-list
wlan-ieee-ps <0/1>
wlan-set-ps-cfg <null_pkt_interval>
wlan-deep-sleep-ps <0/1>
wlan-get-beacon-interval
wlan-wnm-ps <0/1> <sleep_interval>
wlan-set-max-clients-count <max clients count>
wlan-rts <sta/uap> <rts threshold>
wlan-host-11k-enable <0/1>
wlan-host-11k-neighbor-req [ssid <ssid>]
wlan-host-11v-bss-trans-query <0..16>
wlan-roaming <0/1> <rssi_threshold>
wlan-multi-mef <ping/arp/multicast/del> [<action>]
wlan-send-hostcmd
wlan-set-uap-bandwidth <1/2> 1:20 MHz 2:40MHz
wlan-set-uap-hidden-ssid <0/1/2>
wlan-eu-crypto-rc4 <EncDec>
wlan-eu-crypto-aes-wrap <EncDec>
wlan-eu-crypto-aes-ecb <EncDec>
wlan-eu-crypto-ccmp-128 <EncDec>
wlan-ft-roam <bssid> <channel>
wlan-set-antcfg <ant mode> [evaluate_time]
wlan-get-antcfg
wlan-scan-channel-gap <channel_gap_value>
wlan-reset
wlan-set-regioncode <region-code>
wlan-get-regioncode
wlan-11d-enable <sta/uap> <0/1>
wlan-rssi-low-threshold <threshold_value>
wlan-get-signal
wlan-set-bandcfg
wlan-get-bandcfg
wlan-set-su <0/1>
wlan-set-multiple-dtim <value>
wlan-cloud-keep-alive <start/stop/reset>
wlan_tcp_client dst_ip <dst_ip> src_port <src_port> dst_port <dst_port>
wlan-set-country <country_code_str>
wlan-set-country-ie-ignore <0/1>
wlan-get-txpwrlimit <subband>
wlan-set-txpwrlimit
wlan-set-chanlist-and-txpwrlimit
wlan-set-chanlist
wlan-get-chanlist
wlan-set-txratecfg <sta/uap> <format> <index> <autoTx_set>
wlan-get-txratecfg <sta/uap>
wlan-get-data-rate <sta/uap>
wlan-get-pmfcfg
wlan-uap-get-pmfcfg
wlan-set-ed-mac-mode <interface> <ed_ctrl_2g> <ed_offset_2g> <ed_ctrl_5g> <ed_offset_5g>
wlan-get-ed-mac-mode <interface>
ping [-s <packet_size>] [-c <packet_count>] [-W <timeout in sec>] <ipv4/ipv6 address>
iperf [-s|-c <host>|-a|-h] [options]
dhcp-stat
No FAQs have been identified for this project.
No URL
Questions regarding the content/correctness of this example can be entered as Issues within this GitHub repository.
Warning: For more general technical questions regarding NXP Microcontrollers and the difference in expected funcionality, enter your questions on the NXP Community Forum
| Version | Description / Update | Date |
|---|---|---|
| 2.0 | Second release on Application Code Hub | December 30th 2024 |
NXP, the NXP logo, NXP SECURE CONNECTIONS FOR A SMARTER WORLD, Airfast, Altivec, ByLink, CodeWarrior, ColdFire, ColdFire+, CoolFlux, CoolFlux DSP, DESFire, EdgeLock, EdgeScale, EdgeVerse, elQ, Embrace, Freescale, GreenChip, HITAG, ICODE and I-CODE, Immersiv3D, I2C-bus logo , JCOP, Kinetis, Layerscape, MagniV, Mantis, MCCI, MIFARE, MIFARE Classic, MIFARE FleX, MIFARE4Mobile, MIFARE Plus, MIFARE Ultralight, MiGLO, MOBILEGT, NTAG, PEG, Plus X, POR, PowerQUICC, Processor Expert, QorIQ, QorIQ Qonverge, RoadLink wordmark and logo, SafeAssure, SafeAssure logo , SmartLX, SmartMX, StarCore, Symphony, Tower, TriMedia, Trimension, UCODE, VortiQa, Vybrid are trademarks of NXP B.V. All other product or service names are the property of their respective owners. © 2021 NXP B.V.