riscv: dts: starfive: Add full support for JH7110 and VisionFive 2 board

Merge all StarFive dts patches together. Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
starfive-tech · Apr 11, 2023 · fbd9d8b · fbd9d8b
1 parent cb79f61
commit fbd9d8b
Show file tree

Hide file tree

Showing 4 changed files with 725 additions and 2 deletions.
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
@@ -11,3 +11,16 @@
 	model = "StarFive VisionFive 2 v1.2A";
 	compatible = "starfive,visionfive-2-v1.2a", "starfive,jh7110";
 };
+
+&gmac1 {
+	phy-mode = "rmii";
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>,
+			  <&syscrg JH7110_SYSCLK_GMAC1_RX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>,
+				 <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1350>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
@@ -11,3 +11,30 @@
 	model = "StarFive VisionFive 2 v1.3B";
 	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
 };
+
+&gmac0 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+};
+
+&gmac1 {
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>;
+	assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>;
+};
+
+&phy0 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	rx-internal-delay-ps = <1900>;
+	tx-internal-delay-ps = <1500>;
+};
+
+&phy1 {
+	motorcomm,tx-clk-adj-enabled;
+	motorcomm,tx-clk-100-inverted;
+	rx-internal-delay-ps = <0>;
+	tx-internal-delay-ps = <0>;
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -11,6 +11,8 @@
 
 / {
 	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 		i2c0 = &i2c0;
 		i2c2 = &i2c2;
 		i2c5 = &i2c5;
@@ -31,13 +33,45 @@
 		reg = <0x0 0x40000000 0x1 0x0>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <15000>;
+
+			thermal-sensors = <&sfctemp>;
+
+			cooling-maps {
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
 		priority = <224>;
 	};
 };
 
+&dvp_clk {
+	clock-frequency = <74250000>;
+};
+
 &gmac0_rgmii_rxin {
 	clock-frequency = <125000000>;
 };
@@ -54,6 +88,10 @@
 	clock-frequency = <50000000>;
 };
 
+&hdmitx0_pixelclk {
+	clock-frequency = <297000000>;
+};
+
 &i2srx_bclk_ext {
 	clock-frequency = <12288000>;
 };
@@ -86,6 +124,38 @@
 	clock-frequency = <49152000>;
 };
 
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gmac1 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy1: ethernet-phy@1 {
+			reg = <0>;
+		};
+	};
+};
+
 &i2c0 {
 	clock-frequency = <100000>;
 	i2c-sda-hold-time-ns = <300>;
@@ -126,6 +196,49 @@
 	status = "okay";
 };
 
+&mmc0 {
+	max-frequency = <100000000>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	cap-mmc-hw-reset;
+	post-power-on-delay-ms = <200>;
+	status = "okay";
+};
+
+&mmc1 {
+	max-frequency = <100000000>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	broken-cd;
+	cap-sd-highspeed;
+	post-power-on-delay-ms = <200>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	reset-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
+	phys = <&pciephy0>;
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-names = "default";
+	reset-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+	phys = <&pciephy1>;
+	status = "okay";
+};
+
+&ptc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &sysgpio {
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
@@ -183,6 +296,64 @@
 		};
 	};
 
+	pcie0_wake_default: pcie0_wake_default {
+		wake-pins {
+			pinmux = <GPIOMUX(32, GPOUT_HIGH, GPOEN_ENABLE, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie0_clkreq_default: pcie0_clkreq_default {
+		clkreq-pins {
+			bias-disable;
+			pinmux = <GPIOMUX(27, GPOUT_HIGH, GPOEN_ENABLE, GPI_NONE)>;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie1_wake_default: pcie1_wake_default {
+		wake-pins {
+			bias-disable;
+			pinmux = <GPIOMUX(21, GPOUT_HIGH, GPOEN_ENABLE, GPI_NONE)>;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie1_clkreq_default: pcie1_clkreq_default {
+		clkreq-pins {
+			bias-disable;
+			pinmux = <GPIOMUX(29, GPOUT_HIGH, GPOEN_ENABLE, GPI_NONE)>;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+					GPOEN_SYS_PWM0_CHANNEL0, GPI_NONE)>,
+					<GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+					GPOEN_SYS_PWM0_CHANNEL1, GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
 	uart0_pins: uart0-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
@@ -213,3 +384,10 @@
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&usb0 {
+	status = "okay";
+	usbdrd_cdns3: usb@0 {
+		dr_mode = "peripheral";
+	};
+};