l2MpsLN-R5-4-1

• Fix MPS_SLOPE naming collision between FAST and AMC inputs

l2MpsLN-R5-4-0

• Refactor ioc boot files to simplify changes
• Update channel 15 timing settings to look at bits instead of destinations
• Deprecate ana_units.sav
• Restore I1 scalar (not float) BSA PVs
• Change scan rate of asyn analog PV to 0.1 s
• Add time stamp delay to autosave
• Add cblm-specific time window properties to yaml files
• Add in default analog time windows since avg processing is used

l2MpsLN-R5-2-2

• Change sioc-clts-mp01, sioc-bsys-mp04, and sioc-bsyh-mp03 to be UND type, so the kicker watching works better until FW bug fix is finished

l2MpsLN-R5-2-1

• Create missing iocBoot/common/configs/specificsAN_UND.yaml

l2MpsLN-R5-2-0

• refactor databases to load from local instead of mps_configuration
• New analog processing - not quite finished yet in FW, but registers are ok
• Activate BSAS for I0 and I0 FLOAT
• Activate BSA for I0, I0 FLOAT, and I1
• Allow FW 4.10.2 to run against this version of the application
  • New dict and substitution files to handle different register data types
  • High level PV names are the same

l2MpsLN-R4-6-1

• Re-enable BSAS service in all IOCs

l2MpsLN-R4-6-0

• Update app framework to build for host arch and target arch
  • Update to modules:
    • ATCACOMMON_MODULE_VERSION = R2.0.1
    • YAMLLOADER_MODULE_VERSION = R2.3.5
    • L2MPSASYN_MODULE_VERSION = R3.11.1
    • YCPSWASYN_MODULE_VERSION = R3.3.6
    • YAMLDOWNLOADER_MODULE_VERSION = R1.2.3
    • TPRTRIGGER_MODULE_VERSION = R2.6.3
    • BSACORE_MODULE_VERSION = R1.5.6
    • TIMINGAPI_MODULE_VERSION = R0.9
    • TPRPATTERN_MODULE_VERSION = R2.3.7
    • EVRCLIENT_MODULE_VERSION = R1.5.3
    • BSADRIVER_MODULE_VERSION = R4.2.0
  • Update to Packages:
    • LINUX_VERSION = rhel7
    • HPSTPR_VERSION = R2.5.0
    • BSA_VERSION = R2.6.0
    • COMMONATCA_VERSION = R2.0.0
  • Move waveform stream support from ATCACommon back to the app
    • The ATCACommon PR was rejected. Temporary until
      we decide how to move forward
• Create new dev ioc sioc-b34-mp11

l2MpsLN-R4-5-2

• Update iocBoot/sioc-gunb-mp02/mitigation_config.yaml:
  • Duplicate ASM settings for laser 1 to laser 2.
    AOM Permit and Trigger select for Bay 1 will match Bay 0

l2MpsLN-R4-5-1

• Fix FLNK bug in Reg3BitsRW.template - RBV PV needs to link to CALC PV
  but it was linking to set PV
• Adjust mitigation_config.yaml in iocBoot/sioc-sps-mp02 so that RTM_DOUT permits
  2 and 3 listen to destination 5 (LESA) instead of destination 4 (SXR)

l2MpsLN-R4-3-0

• Upgrade bsaDriver to 3.2.1
  • Change init_lc2_bsas.cmd to work with bsaDriver 3.2.1
• Fix calc bug to determine mode in modeManagerDN.db
• Change INST for TPR from :1 to :0