manual.txt

installation of stage4 Secploit OS . 

1. first you have to get the desired device you want to install .
fdisk -l 

2. in our case , VMWARE , VB , /dev/sda is the most common  .

### Step -3. start the process of partion by executing the following commands : 
parted -s /dev/sda mklabel gpt
parted -s /dev/sda unit mib 
parted -s /dev/sda mkpart primary 1 3 
parted -s /dev/sda name 1 grub 
parted -s /dev/sda set 1 bios_grub on 

parted -s /dev/sda mkpart primary 3 131
parted -s /dev/sda name 2 boot 
parted -s /dev/sda mkpart primary 643 -- -1 
parted -s /dev/sda name 3 rootfs
parted -s /dev/sda set 2 boot on 

### Step-4. 
we have then to start formatting these disks : 

mkfs.ext2 /dev/sda2 
mkfs.ext4 /dev/sda3

5. we are ready now to start mounting : 
mount /dev/sda3 /mnt/gentoo 

6. start the proccess of installation 
tar xpf /mnt/cdrom/stages/secploit.tar.gz2 --xattrs-include='*.*' --numeric-owner -C /mnt/gentoo


7. when finish installation , we have to chroot the environment 

mount --types proc /proc /mnt/gentoo/proc
mount --rbind /sys /mnt/gentoo/sys
mount --rbind /dev /mnt/gentoo/dev

8. execute these also : 

chroot /mnt/gentoo /bin/bash 
source /etc/profile
export PS1="(chroot) ${PS1}"

9. you are now inside the environment , let's make the final step to setup our grub . 

grub-install /dev/sda 
grub-mkconfig -o /boot/grub/grub.cfg 

10 . unmount and exit 
umount -l /dev/sda3 
reboot .

11. enjouy