Still not working..

[Tweakerd]

Thanks for quick response.

The removal of the platform: yr in the yaml file is not the problem..
I already removed it, because otherwise you can't restart HA due to a error.

As I understoot from your manual, if everything is working well, there should be a new integration popping up in the tab integrations.. That is not happening..

FYI:
I'm running HASSIO on a RASPBERRY 4+ 8GB
The USB device is: ttyUSB0
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0MSDSX-if00-port0
Subsysteem:
tty
Apparaatpad:
/dev/ttyUSB0
ID:
/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB0MSDSX-if00-port0

I'm connected to a SDM720M-D..
Works great on Domoticz for quite a while..

Of course.. I've changed the register.yaml to comply to the SDM720 instead of the SDM630..
there are quite some different adresses.

hope this information is usefull

regards,

[dingo35]

The modbus configuration options have changed; so with current (2021.12.6) HomeAssistant this will work on an Eastron SDM72D-M (the sign before "type" is the minus sign):

modbus:

• type: serial
  method: rtu
  port: /dev/ttyUSB0
  baudrate: 9600
  stopbits: 1
  bytesize: 8
  parity: N
  close_comm_on_error: false
  retry_on_empty: true
  retries: 10
  delay: 10
  message_wait_milliseconds: 1000
  timeout: 10
  #sensors:
  sensors: !include sdm72_registers.yaml

Part of sdm72_registers.yaml:

• name: Phase 1 line to neutral volts
  slave: 1
  address: 0
  input_type: input
  data_type: float32
  precision: 2
  unit_of_measurement: V
  scan_interval: 60
  count: 2

• name: Phase 2 line to neutral volts
  slave: 1
  address: 2
  input_type: input
  data_type: float32
  precision: 2
  unit_of_measurement: V
  scan_interval: 60
  count: 2

etc.