maintenance-panel.php

<?php
/* Copyright 2012 BrewPi/Elco Jacobs.
 * This file is part of BrewPi.

 * BrewPi is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.

 * BrewPi is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.

 * You should have received a copy of the GNU General Public License
 * along with BrewPi.  If not, see <http://www.gnu.org/licenses/>.
 */

function echoFilterSelect($filterName){
	echo "<select name=" . $filterName . " class=\"cc " . $filterName . "\">";
	// These values assume a sample frequency of 1 hz and 3 cascaded filters. Delay time below is in nr of samples for a single section
	echo "<option value=0>   9 seconds</option>"; // a=4,	b=0,	delay time = 3
	echo "<option value=1>  18 seconds</option>"; // a=6,	b=1,	delay time = 6
	echo "<option value=2>  39 seconds</option>"; // a=8,	b=2,	delay time = 13
	echo "<option value=3>  78 seconds</option>"; // a=10,	b=3,	delay time = 26
	echo "<option value=4> 159 seconds</option>"; // a=12,	b=4,	delay time = 53
	echo "<option value=5> 318 seconds</option>"; // a=14,	b=5,	delay time = 106
	echo "<option value=6> 639 seconds</option>"; // a=16,	b=6,	delay time = 213
	echo "</select>";
}

# slope filters are updated every 3 seconds, so have different delay time
function echoSlopeFilterSelect($filterName){
	echo "<select name=" . $filterName . " class=\"cc " . $filterName . "\">";
	echo "<option value=0>  27 seconds</option>"; // a=4,	b=0,	delay time = 3
	echo "<option value=1>  54 seconds</option>"; // a=6,	b=1,	delay time = 6
	echo "<option value=2>   2 minutes</option>"; // a=8,	b=2,	delay time = 13
	echo "<option value=3>   4 minutes</option>"; // a=10,	b=3,	delay time = 26
	echo "<option value=4>   8 minutes</option>"; // a=12,	b=4,	delay time = 53
	echo "<option value=5>  16 minutes</option>"; // a=14,	b=5,	delay time = 106
	echo "<option value=6>  32 minutes</option>"; // a=16,	b=6,	delay time = 213
	echo "</select>";
}

function echoYesNoSelect($optionName){
	echo "<select name=" . $optionName . " class=\"cc " . $optionName . "\">";
	echo "<option value=1> Yes</option>";
	echo "<option value=0>  No</option>";
	echo "</select>";
}
function echoRotarySelect($optionName){
	echo "<select name=" . $optionName . " class=\"cc " . $optionName . "\">";
	echo "<option value=0> Full step</option>";
	echo "<option value=1> Half step</option>";
	echo "</select>";
}
?>
<ul>
	<button class="script-status"></button>
	<li><a href="#settings"><span class="setting-name">Settings</span></a></li>
	<li><a href="#view-logs"><span>View logs</span></a></li>
	<li><a href="previous_beers.php"><span>Previous Beers</span></a></li>
	<li><a href="#control-algorithm"><span>Control Algorithm</span></a></li>
	<li><a href="#device-config"><span>Device Configuration</span></a></li>
	<li><a href="#advanced-settings"><span>Advanced Settings</span></a></li>
	<li><a href="#reprogram-arduino"><span>Reprogram <span class="boardMoniker">controller</span></span></a></li>
	<!--kinda dirty to have buttons in the ul, but the ul is styled as a nice header by jQuery UI -->
</ul>
<div id="reprogram-arduino">
	<p>Here you can upload a <span class="programFileType">firmware</span> file which will be uploaded to the <span class="boardMoniker">controller</span> by the Python script.
		The script will automatically restart itself after programming.
		Just hit the back button on your browser to continue running BrewPi.</p>
	<div id = "program-container">
		<!-- This form has a hidden iFrame as target, so the full page is not refreshed -->
		<form action="program_arduino.php" method="post" enctype="multipart/form-data" target="upload-target">
			<div id="program-options">
				<div class="program-option">
					<label for="file"><span class="programFileType">HEX</span> file:</label>
					<input type="file" name="file" id="file" /> <!-- add max file size?-->
				</div>
				<div class="program-option">
					<label for="boardType"> Board type:</label>
					<select name="boardType" class="boardType">
						<option value="leonardo">Leonardo</option>
						<option value="uno">Uno</option>
						<option value="atmega328">ATmega328 based</option>
						<option value="diecimila">Atmega168 based</option>
						<option value="mega2560">Mega 2560</option>
						<option value="mega">Mega 1280</option>
						<option value="core">Spark Core</option>
						<option value="photon">Particle Photon</option>
					</select>
				</div>
				<div class="program-option">
					<label for="restoreSettings">Restore old settings after programming</label>
					<input type="radio" name="restoreSettings" value="true" checked>Yes
					<input type="radio" name="restoreSettings" value="false">No
				</div>
				<div class="program-option">
					<label for="restoreDevices">Restore installed devices after programming</label>
					<input type="radio" name="restoreDevices" value="true" checked>Yes
					<input type="radio" name="restoreDevices" value="false">No
				</div>
			</div>
			<input id="program-submit-button" type="submit" name="Program" value="Program">
		</form>

		<h3 id="program-stderr-header">Script stderr output will auto-refresh while programming if you keep this tab open</h3>
		<div class="stderr console-box"></div>
		<iframe id="upload-target" name="upload-target" src="about:blank" style="width:0;height:0;border:0px solid #fff;"></iframe>
	</div>
</div>
<div id="settings">
	<div class="settings-container">
		<div class="setting-container">
			<span class="setting-name">Log data point every:</span>
			<select id="interval">
				<option value="10">10 Seconds</option>
				<option value="30">30 Seconds</option>
				<option value="60">1 Minute</option>
				<option value="120">2 Minutes</option>
				<option value="300">5 Minutes</option>
				<option value="600">10 Minutes</option>
				<option value="1800">30 Minutes</option>
				<option value="3600">1 hour</option>
			</select>
			<button id="apply-interval" class="apply-button">Apply</button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Profile name:</span>
			<input id="profile-name" value="<?php echo urldecode($profileName) ?>" size=30 type="text" />
			<button class="apply-profile-name apply-button">Apply</button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Date format:</span>
			<select id="datetime-format-display">
				<option <?php if ($dateTimeFormatDisplay == "mm/dd/yy") echo "selected=\"selected\""; ?>>mm/dd/yy</option>
				<option <?php if ($dateTimeFormatDisplay == "dd/mm/yy") echo "selected=\"selected\""; ?>>dd/mm/yy</option>
			</select>
			<button class="apply-datetime-format-display apply-button">Apply</button>
		</div>
	</div>
</div>
<div id="control-algorithm">
	<div class = "header ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">
		<span class='container-title'>Controller state as JSON</span>
		<button class="cv update-from-arduino">Refresh</button>
	</div>
	<div class="algorithm-container ui-widget-content ui-corner-all">
		<pre class="json" id="algorithm-json">Click refresh to receive controller from device.</pre>
	</div>
</div>
<div id="advanced-settings">
	<div class = "header ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">
		<span class='container-title'>Control settings</span>
		<button class="cs load-defaults">Reload defaults</button>
		<button class="cs receive-from-script">Receive from script</button>
		<button class="cs update-from-arduino">Update from <span class="boardMoniker">controller</span></button>
	</div>
	<div id="control-settings-container" class="ui-widget-content ui-corner-all">
		<div class="setting-container">
			<span class="setting-name">Mode</span>
			<span class="explanation">Active temperature control mode. Use to control panel to switch (apply button).</span>
			<select name="mode" class="cs mode">
				<option value="b">Beer Constant</option>
				<option value="p">Beer Profile</option>
				<option value="f">Fridge Constant</option>
				<option value="o">Off</option>
				<option value="t">Test mode</option>
			</select>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Beer Temperature Setting</span>
			<span class="explanation">Beer temperature setting when in profile or beer constant mode. Use the control panel to adjust.</span>
			<input type="text" name="beerSet" class="cs beerSet">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Fridge Temperature Setting</span>
			<span class="explanation">Automatically adjust when in profile/beer constant mode. Use the control panel to adjust.</span>
			<input type="text" name="fridgeSet" class="cs fridgeSet">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
	</div>
	<div class = "header ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">
		<span class='container-title'>Control constants</span>
		<button class="cc load-defaults">Reload defaults</button>
		<button class="cc receive-from-script">Receive from script</button>
		<button class="cc update-from-arduino">Update from <span class="boardMoniker">controller</span></button>
	</div>
	<div id="control-constants-container" class="ui-widget-content ui-corner-all">
		<div class="setting-container">
			<span class="setting-name">Temperature format</span>
			<span class="explanation">Switch your temperature format here. The algorithm always uses fixed point Celcius format internally,
				but it converts all settings that go in or out to the right format.</span>
			<select name="tempFormat" class="cc tempFormat">
				<option value="C">Celsius</option>
				<option value="F">Fahrenheit</option>
			</select>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<span class="section-explanation">
			<p>
				This release runs on 3 PIDs (heater 2 is not used right now).
				The Heater 1 and Cooler PIDs take the fridge temperature as input and each drive a PWM actuator independently.
				However, only one actuator can be active at any time, with a dead time of 30 minutes for switching.
				Only the actuator with the highest value is activated, to prevent heating and cooling at the same time.
			</p>
			<p>
				When running in beer constant or profile mode, the Beer-to-Fridge PID determines the fridge setpoint.
				The PID output is added to the beer setting to give a fridge setting.
			</p>
			<p>
				Actuators are driven with PWM.
				For the cooler output, the compressor is guarded by minimum ON and OFF times.
				For PWM values below the minimum ON time, the PWM actuator will start skipping cycles to achieve the correct average.
			</p>
		</span>

		<div class="setting-container">
			<span class="setting-name">Beer-to-Fridge proportional gain (Kp)</span>
			<span class="explanation">Actuatour output in % = Kp * input error</span>
			<input type="text" name="beer2fridge_kp" class="cc beer2fridge_kp">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Beer-to-Fridge integral time constant (Ti)</span>
			<span class="explanation">The input error is slowly accumulated in the integrator.
			A steady state error that is not corrected by Kp, is corrected by the integral.
			The integral part grows by the proportional part every Ti seconds.
			If you let it grow to quickly, this can create overshoot. Be careful.
			</span>
			<input type="text" name="beer2fridge_ti" class="cc beer2fridge_ti">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Beer-to-Fridge derivative time constant (Td)</span>
			<span class="explanation">The derivative is the temperature difference per second. The derivative part of PID is -Kp * Td * dT/dt.
				This can be interpreted as looking Td seconds ahead.
				For very slow processes (like fermentation), it is recommended to disable the derivative gain by setting it to zero.
				The limited sensor resolution will make it hard to distinguish bit flips from rises in temperature.
			</span>
			<input type="text" name="beer2fridge_td" class="cc beer2fridge_td">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
		    <span class="setting-name">Maximum difference between fridge and beer set point (= output of PID)</span>
			<span class="explanation">The output of this PID is added to the beer set point to automatically set the fridge set point.
			You can define the maximum difference between the beer temperature setting and fridge temperature setting here.
			</span>
			<input type="text" name="beer2fridge_pidMax" class="cc beer2fridge_pidMax">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
        </div>

		<div class="setting-container">
			<span class="setting-name">Beer-to-Fridge Input filter delay time</span>
			<span class="explanation">Input to the PID is filtered. This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("beer2fridge_infilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Beer-to-Fridge Derivative filter delay time</span>
			<span class="explanation">Input to the differential gain is filtered, to prevent bit flips from causing a high derivative.
				This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("beer2fridge_dfilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>

		<div class="setting-container">
			<span class="setting-name">Cooler proportional gain (Kp)</span>
			<span class="explanation">Actuatour output in % = Kp * input error</span>
			<input type="text" name="cooler_kp" class="cc cooler_kp">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler integral time constant (Ti)</span>
			<span class="explanation">The input error is slowly accumulated in the integrator.
			A steady state error that is not corrected by Kp, is corrected by the integral.
			The integral part grows by the proportional part every Ti seconds.
			If you let it grow to quickly, this can create overshoot. Be careful.
			</span>
			<input type="text" name="cooler_ti" class="cc cooler_ti">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler derivative time constant (Td)</span>
			<span class="explanation">The derivative is the temperature difference per second. The derivative part of PID is -Kp * Td * dT/dt.
				This can be interpreted as looking Td seconds ahead.
				For very slow processes (like fermentation), it is recommended to disable the derivative gain by setting it to zero.
				The limited sensor resolution will make it hard to distinguish bit flips from rises in temperature.
			</span>
			<input type="text" name="cooler_td" class="cc cooler_td">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler PWM period (seconds)</span>
			<span class="explanation">Each PWM cycle takes this many seconds. A value lower than 4 seconds is not recommended.</span>
			<input type="text" name="coolerPwmPeriod" class="cc coolerPwmPeriod">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler minimum OFF time</span>
			<span class="explanation">A fridge compressor needs to be OFF for a minimum time to protect it from building up pressure and overheating.</span>
			<input type="text" name="minCoolIdleTime" class="cc minCoolIdleTime">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler minimum ON time</span>
			<span class="explanation">A minimum ON time is also recommended, because many short cycles limit the compressor lifespan.</span>
			<input type="text" name="minCoolTime" class="cc minCoolTime">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler Input filter delay time</span>
			<span class="explanation">Input to the PID is filtered. This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("cooler_infilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Cooler Derivative filter delay time</span>
			<span class="explanation">Input to the differential gain is filtered, to prevent bit flips from causing a high derivative.
				This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("cooler_dfilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>

		<div class="setting-container">
			<span class="setting-name">Heater 1 proportional gain (Kp)</span>
			<span class="explanation">Actuatour output in % = Kp * input error</span>
			<input type="text" name="heater1_kp" class="cc heater1_kp">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 1 integral time constant (Ti)</span>
			<span class="explanation">The input error is slowly accumulated in the integrator.
			A steady state error that is not corrected by Kp, is corrected by the integral.
			The integral part grows by the proportional part every Ti seconds.
			If you let it grow to quickly, this can create overshoot. Be careful.
			</span>
			<input type="text" name="heater1_ti" class="cc heater1_ti">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 1 derivative time constant (Td)</span>
			<span class="explanation">The derivative is the temperature difference per second. The derivative part of PID is -Kp * Td * dT/dt.
				This can be interpreted as looking Td seconds ahead.
				For very slow processes (like fermentation), it is recommended to disable the derivative gain by setting it to zero.
				The limited sensor resolution will make it hard to distinguish bit flips from rises in temperature.
			</span>
			<input type="text" name="heater1_td" class="cc heater1_td">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 1 PWM period (seconds)</span>
            <span class="explanation">Each PWM cycle takes this many seconds. A value lower than 4 seconds is not recommended.</span>
			<input type="text" name="heater1PwmPeriod" class="cc heater1PwmPeriod">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 1 Input filter delay time</span>
			<span class="explanation">Input to the PID is filtered. This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("heater1_infilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 1 Derivative filter delay time</span>
			<span class="explanation">Input to the differential gain is filtered, to prevent bit flips from causing a high derivative.
				This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("heater1_dfilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>

		<div class="setting-container">
			<span class="setting-name">Heater 2 proportional gain (Kp)</span>
			<span class="explanation">Actuatour output in % = Kp * input error</span>
			<input type="text" name="heater2_kp" class="cc heater2_kp">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 2 integral time constant (Ti)</span>
			<span class="explanation">The input error is slowly accumulated in the integrator.
			A steady state error that is not corrected by Kp, is corrected by the integral.
			The integral part grows by the proportional part every Ti seconds.
			If you let it grow to quickly, this can create overshoot. Be careful.
			</span>
			<input type="text" name="heater2_ti" class="cc heater2_ti">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 2 derivative time constant (Td)</span>
			<span class="explanation">The derivative is the temperature difference per second. The derivative part of PID is -Kp * Td * dT/dt.
				This can be interpreted as looking Td seconds ahead.
				For very slow processes (like fermentation), it is recommended to disable the derivative gain by setting it to zero.
				The limited sensor resolution will make it hard to distinguish bit flips from rises in temperature.
			</span>
			<input type="text" name="heater2_td" class="cc heater2_td">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 2 PWM period (seconds)</span>
			<span class="explanation">Each PWM cycle takes this many seconds. A value lower than 4 seconds is not recommended.</span>
			<input type="text" name="heater2PwmPeriod" class="cc heater2PwmPeriod">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 2 Input filter delay time</span>
			<span class="explanation">Input to the PID is filtered. This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("heater2_infilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
		<div class="setting-container">
			<span class="setting-name">Heater 2 Derivative filter delay time</span>
			<span class="explanation">Input to the differential gain is filtered, to prevent bit flips from causing a high derivative.
				This causes a delay, because of the moving average. More delay means more filtering.</span>
			<?php echoFilterSelect("heater2_dfilt") ?>
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>
        <div class="setting-container">
			<span class="setting-name">Dead time when switching between actuators</span>
			<span class="explanation">Only one can be active at each moment. The dead time is the minimum to wait when switching between one actuator and another.
			This prevents quickly alternating between heating to cooling.</span>
			<input type="text" name="deadTime" class="cc deadTime">
			<button class="send-button">Send to <span class="boardMoniker">controller</span></button>
		</div>

		<span class="section-explanation">
			<p>With the button below, you can reset the entire <span class="boardMoniker">controller</span> to factory defaults.</p>
			<p>This will reset all settings and will remove all installed devices.</p>
			<button class="reset-controller-button">Reset <span class="boardMoniker">controller</span> to factory defaults</button>
		</span>
	</div>
</div>

<div id="device-config">
	<div class="console-box" id="device-console">
		<span></span>
	</div>
	<div class = "header ui-helper-reset ui-helper-clearfix ui-widget-header ui-corner-all">
		<span class='container-title'>Device List</span>
		<div class="refresh-options-container">
			<div class="refresh-option">
				<input type="checkbox" name="read-values" id="read-values" /><label for="read-values">Read values</label>
			</div>
		</div>
		<button class="refresh-device-list">Refresh device list</button>
	</div>
	<div class="device-list-container ui-widget-content ui-corner-all">
		<div class ="spinner-position"></div>
		<div class="device-list"></div>
	</div>
</div>

<div id="view-logs">
	<div id="log-buttons" style="clear:both">
		<button id="erase-logs">Erase logs</button>
		<button id="auto-refresh-logs">Enable auto refresh</button>
		<button id="refresh-logs">Refresh</button>
	</div>
	<h3>stderr:</h3>
	<div class="stderr console-box"></div>
	<h3>stdout:</h3>
	<div class="stdout console-box"></div>
</div>