Use of wire_names

doc/source/tutorials/compiler.rst

@@ -80,11 +80,10 @@ The following example shows how to modify the compiler in order to execute a cir
 
 
     # define a compiler rule that translates X to the pi-pulse
-    def x_rule(gate, platform):
+    def x_rule(qubits_ids, platform, parameters=None):
         """X gate applied with a single pi-pulse."""
-        qubit = gate.target_qubits[0]
         sequence = PulseSequence()
-        sequence.add(platform.create_RX_pulse(qubit, start=0))
+        sequence.add(platform.create_RX_pulse(qubits_ids[1][0], start=0))
         return sequence, {}
 
 

src/qibolab/backends.py

@@ -125,6 +125,13 @@ def execute_circuit(self, circuit, initial_state=None, nshots=1000):
                 "Hardware backend only supports circuits as initial states.",
             )
 
+        # This should be done in qibo side
+        # Temporary fix: overwrite the wire names
+        if not all(q in circuit.wire_names for q in self.platform.qubits):
+            circuit._wire_names = self.qubits
+
+        self.platform.wire_names = circuit.wire_names
+
         sequence, measurement_map = self.compiler.compile(circuit, self.platform)
 
         if not self.platform.is_connected:
@@ -167,6 +174,12 @@ def execute_circuits(self, circuits, initial_states=None, nshots=1000):
                 "Hardware backend only supports circuits as initial states.",
             )
 
+        # This should be done in qibo side
+        # Temporary fix: overwrite the wire names
+        for circuit in circuits:
+            if not all(q in circuit.wire_names for q in self.platform.qubits):
+                circuit._wire_names = self.qubits
+
         # TODO: Maybe these loops can be parallelized
         sequences, measurement_maps = zip(
             *(self.compiler.compile(circuit, self.platform) for circuit in circuits)

src/qibolab/compilers/compiler.py

@@ -99,12 +99,24 @@ def inner(func):
         return inner
 
     def _compile_gate(
-        self, gate, platform, sequence, virtual_z_phases, moment_start, delays
+        self,
+        gate,
+        platform,
+        sequence,
+        virtual_z_phases,
+        moment_start,
+        delays,
+        wire_names,
     ):
         """Adds a single gate to the pulse sequence."""
         rule = self[gate.__class__]
+
         # get local sequence and phases for the current gate
-        gate_sequence, gate_phases = rule(gate, platform)
+        qubits_ids = (
+            [wire_names[qubit] for qubit in gate.control_qubits],
+            [wire_names[qubit] for qubit in gate.target_qubits],
+        )
+        gate_sequence, gate_phases = rule(qubits_ids, platform, gate.parameters)
 
         # update global pulse sequence
         # determine the right start time based on the availability of the qubits involved
@@ -154,7 +166,13 @@ def compile(self, circuit, platform):
                         delays[qubit] += gate.delay
                     continue
                 gate_sequence, gate_phases = self._compile_gate(
-                    gate, platform, sequence, virtual_z_phases, moment_start, delays
+                    gate,
+                    platform,
+                    sequence,
+                    virtual_z_phases,
+                    moment_start,
+                    delays,
+                    circuit.wire_names,
                 )
                 for qubit in gate.qubits:
                     delays[qubit] = 0

src/qibolab/compilers/default.py

@@ -8,52 +8,48 @@
 from qibolab.pulses import PulseSequence
 
 
-def identity_rule(gate, platform):
+def identity_rule(qubits_ids, platform, parameters=None):
     """Identity gate skipped."""
     return PulseSequence(), {}
 
 
-def z_rule(gate, platform):
+def z_rule(qubits_ids, platform, parameters=None):
     """Z gate applied virtually."""
-    qubit = list(platform.qubits)[gate.target_qubits[0]]
-    return PulseSequence(), {qubit: math.pi}
+    return PulseSequence(), {qubits_ids[1][0]: math.pi}
 
 
-def rz_rule(gate, platform):
+def rz_rule(qubits_ids, platform, parameters=None):
     """RZ gate applied virtually."""
-    qubit = list(platform.qubits)[gate.target_qubits[0]]
-    return PulseSequence(), {qubit: -gate.parameters[0]}
+    return PulseSequence(), {qubits_ids[1][0]: -parameters[0]}
 
 
-def gpi2_rule(gate, platform):
+def gpi2_rule(qubits_ids, platform, parameters=None):
     """Rule for GPI2."""
-    qubit = list(platform.qubits)[gate.target_qubits[0]]
-    theta = gate.parameters[0]
+    theta = parameters[0]
     sequence = PulseSequence()
-    pulse = platform.create_RX90_pulse(qubit, start=0, relative_phase=theta)
+    pulse = platform.create_RX90_pulse(qubits_ids[1][0], start=0, relative_phase=theta)
     sequence.add(pulse)
     return sequence, {}
 
 
-def gpi_rule(gate, platform):
+def gpi_rule(qubits_ids, platform, parameters=None):
     """Rule for GPI."""
-    qubit = list(platform.qubits)[gate.target_qubits[0]]
-    theta = gate.parameters[0]
+    theta = parameters[0]
     sequence = PulseSequence()
     # the following definition has a global phase difference compare to
     # to the matrix representation. See
     # https://github.com/qiboteam/qibolab/pull/804#pullrequestreview-1890205509
     # for more detail.
-    pulse = platform.create_RX_pulse(qubit, start=0, relative_phase=theta)
+    pulse = platform.create_RX_pulse(qubits_ids[1][0], start=0, relative_phase=theta)
     sequence.add(pulse)
     return sequence, {}
 
 
-def u3_rule(gate, platform):
+def u3_rule(qubits_ids, platform, parameters=None):
     """U3 applied as RZ-RX90-RZ-RX90-RZ."""
-    qubit = list(platform.qubits)[gate.target_qubits[0]]
+    qubit = qubits_ids[1][0]
     # Transform gate to U3 and add pi/2-pulses
-    theta, phi, lam = gate.parameters
+    theta, phi, lam = parameters
     # apply RZ(lam)
     virtual_z_phases = {qubit: lam}
     sequence = PulseSequence()
@@ -79,24 +75,26 @@ def u3_rule(gate, platform):
     return sequence, virtual_z_phases
 
 
-def cz_rule(gate, platform):
+def cz_rule(qubits_ids, platform, parameters=None):
     """CZ applied as defined in the platform runcard.
 
     Applying the CZ gate may involve sending pulses on qubits that the
     gate is not directly acting on.
     """
-    return platform.create_CZ_pulse_sequence(gate.qubits)
+    qubits = qubits_ids[0] + qubits_ids[1]
+    return platform.create_CZ_pulse_sequence(qubits)
 
 
-def cnot_rule(gate, platform):
+def cnot_rule(qubits_ids, platform, parameters=None):
     """CNOT applied as defined in the platform runcard."""
-    return platform.create_CNOT_pulse_sequence(gate.qubits)
+    qubits = qubits_ids[0] + qubits_ids[1]
+    return platform.create_CNOT_pulse_sequence(qubits)
 
 
-def measurement_rule(gate, platform):
+def measurement_rule(qubits_ids, platform, parameters=None):
     """Measurement gate applied using the platform readout pulse."""
     sequence = PulseSequence()
-    for qubit in gate.target_qubits:
+    for qubit in qubits_ids[1]:
         MZ_pulse = platform.create_MZ_pulse(qubit, start=0)
         sequence.add(MZ_pulse)
     return sequence, {}

tests/test_backends.py

@@ -11,10 +11,11 @@
 from qibolab.backends import QibolabBackend
 
 
-def generate_circuit_with_gate(nqubits, gate, **kwargs):
+def generate_circuit_with_gate(nqubits, gate, names, **kwargs):
     circuit = Circuit(nqubits)
     circuit.add(gate(qubit, **kwargs) for qubit in range(nqubits))
     circuit.add(gates.M(*range(nqubits)))
+    circuit._wire_names = names
     return circuit
 
 
@@ -62,6 +63,10 @@ def test_natives():
 
 def test_natives_no_cz_cnot():
     platform = create_platform("dummy")
+    for p in platform.pairs:
+        platform.pairs[p].native_gates.CZ = None
+        platform.pairs[p].native_gates.CNOT = None
+
     backend = QibolabBackend(platform)
     assert set(backend.natives) == {
         "I",
@@ -71,21 +76,15 @@ def test_natives_no_cz_cnot():
         "GPI2",
         "GPI",
         "M",
-        "CZ",
-        "CNOT",
     }
 
-    for gate in ["CZ", "CNOT"]:
-        for p in platform.pairs:
-            setattr(platform.pairs[p].native_gates, gate, None)
-        assert gate not in set(backend.natives)
-
 
 def test_execute_circuit_initial_state():
     backend = QibolabBackend("dummy")
     circuit = Circuit(1)
     circuit.add(gates.GPI2(0, phi=0))
     circuit.add(gates.M(0))
+    circuit._wire_names = [0]
     with pytest.raises(ValueError):
         backend.execute_circuit(circuit, initial_state=np.ones(2))
 
@@ -107,7 +106,7 @@ def test_execute_circuit_initial_state():
 def test_execute_circuit(gate, kwargs):
     backend = QibolabBackend("dummy")
     nqubits = backend.platform.nqubits
-    circuit = generate_circuit_with_gate(nqubits, gate, **kwargs)
+    circuit = generate_circuit_with_gate(nqubits, gate, list(range(nqubits)), **kwargs)
     result = backend.execute_circuit(circuit, nshots=100)
 
 
@@ -117,12 +116,14 @@ def test_measurement_samples():
 
     circuit = Circuit(nqubits)
     circuit.add(gates.M(*range(nqubits)))
+    circuit._wire_names = list(range(nqubits))
     result = backend.execute_circuit(circuit, nshots=100)
     assert result.samples().shape == (100, nqubits)
     assert sum(result.frequencies().values()) == 100
 
     circuit = Circuit(nqubits)
     circuit.add(gates.M(0, 2))
+    circuit._wire_names = list(range(nqubits))
     result = backend.execute_circuit(circuit, nshots=100)
     assert result.samples().shape == (100, 2)
     assert sum(result.frequencies().values()) == 100
@@ -135,6 +136,7 @@ def test_execute_circuits():
     circuit = Circuit(3)
     circuit.add(gates.GPI2(i, phi=np.pi / 2) for i in range(3))
     circuit.add(gates.M(0, 1, 2))
+    circuit._wire_names = list(range(3))
 
     results = backend.execute_circuits(
         5 * [circuit], initial_states=initial_state_circuit, nshots=100
@@ -151,6 +153,7 @@ def test_multiple_measurements():
     circuit = Circuit(4)
     circuit.add(gates.GPI2(i, phi=np.pi / 2) for i in range(2))
     circuit.add(gates.CZ(1, 2))
+    circuit._wire_names = list(range(4))
     res0 = circuit.add(gates.M(0))
     res1 = circuit.add(gates.M(3))
     res2 = circuit.add(gates.M(1))
@@ -171,6 +174,7 @@ def dummy_string_qubit_names():
     platform.pairs = {
         (f"A{q0}", f"A{q1}"): pair for (q0, q1), pair in platform.pairs.items()
     }
+    platform.wire_names = [f"A{q}" for q in range(platform.nqubits)]
     return platform
 
 
@@ -182,6 +186,7 @@ def test_execute_circuit_str_qubit_names():
     circuit.add(gates.GPI2(i, phi=np.pi / 2) for i in range(2))
     circuit.add(gates.CZ(1, 2))
     circuit.add(gates.M(0, 1))
+    circuit._wire_names = ["A0", "A1", "A2"]
     result = backend.execute_circuit(circuit, nshots=20)
     assert result.samples().shape == (20, 2)
 
@@ -195,6 +200,7 @@ def test_ground_state_probabilities_circuit(connected_backend):
     nqubits = connected_backend.platform.nqubits
     circuit = Circuit(nqubits)
     circuit.add(gates.M(*range(nqubits)))
+    circuit._wire_names = list(range(nqubits))
     result = connected_backend.execute_circuit(circuit, nshots=nshots)
     freqs = result.frequencies(binary=False)
     probs = [freqs[i] / nshots for i in range(2**nqubits)]
@@ -214,6 +220,7 @@ def test_excited_state_probabilities_circuit(connected_backend):
     circuit = Circuit(nqubits)
     circuit.add(gates.X(q) for q in range(nqubits))
     circuit.add(gates.M(*range(nqubits)))
+    circuit._wire_names = list(range(nqubits))
     result = connected_backend.execute_circuit(circuit, nshots=nshots)
     freqs = result.frequencies(binary=False)
     probs = [freqs[i] / nshots for i in range(2**nqubits)]
@@ -237,6 +244,7 @@ def test_superposition_for_all_qubits(connected_backend):
         circuit = Circuit(nqubits)
         circuit.add(gates.GPI2(q=q, phi=np.pi / 2))
         circuit.add(gates.M(q))
+        circuit._wire_names = list(range(nqubits))
         freqs = connected_backend.execute_circuit(circuit, nshots=nshots).frequencies(
             binary=False
         )

tests/test_compilers_default.py

@@ -32,6 +32,8 @@ def test_u3_sim_agreement():
 def compile_circuit(circuit, platform):
     """Compile a circuit to a pulse sequence."""
     compiler = Compiler.default()
+    # Temporary fix: overwrite the wire names
+    circuit._wire_names = list(platform.qubits)
     sequence, _ = compiler.compile(circuit, platform)
     return sequence