kernel-61-PKGBUILD.patch

diff --git a/0999-acs.gitpatch b/0999-acs.gitpatch
index adbbc6b..aff1bc3 100644
--- a/0999-acs.gitpatch
+++ b/0999-acs.gitpatch
@@ -18,13 +18,13 @@ index 2fba824..a797d74 100644
  				Safety option to keep boot IRQs enabled. This
  				should never be necessary.
 diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
-index 003950c..d3bb542 100644
+index 472fa2c..6860e58 100644
 --- a/drivers/pci/quirks.c
 +++ b/drivers/pci/quirks.c
-@@ -193,6 +193,107 @@ static int __init pci_apply_final_quirks(void)
+@@ -194,6 +194,107 @@ static int __init pci_apply_final_quirks(void)
  }
  fs_initcall_sync(pci_apply_final_quirks);
-
+ 
 +static bool acs_on_downstream;
 +static bool acs_on_multifunction;
 +
@@ -129,13 +129,12 @@ index 003950c..d3bb542 100644
  /*
   * Decoding should be disabled for a PCI device during BAR sizing to avoid
   * conflict. But doing so may cause problems on host bridge and perhaps other
-@@ -4950,6 +5051,8 @@ static const struct pci_dev_acs_enabled {
- 	{ PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
- 	/* Zhaoxin Root/Downstream Ports */
+@@ -5017,6 +5118,8 @@ static const struct pci_dev_acs_enabled {
  	{ PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
+ 	/* Wangxun nics */
+ 	{ PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs },
 +        /* allow acs for any */
 +        { PCI_ANY_ID, PCI_ANY_ID, pcie_acs_overrides },
  	{ 0 }
  };
-
-
+ 
diff --git a/PKGBUILD b/PKGBUILD
index b02bc05..62f2a30 100644
--- a/PKGBUILD
+++ b/PKGBUILD
@@ -13,11 +13,11 @@ pkgver=6.1.83
 pkgrel=1
 arch=('x86_64')
 url="https://www.kernel.org/"
-license=('GPL2')
+license=('GPL-2.0-or-later')
 makedepends=(bc docbook-xsl libelf pahole python-sphinx git inetutils kmod xmlto cpio perl tar xz)
 options=('!strip')
 source=("https://git.kernel.org/torvalds/t/linux-${_basekernel}.tar.gz"
-        "https://www.kernel.org/pub/linux/kernel/v6.x/patch-${pkgver}.xz"
+        "https://cdn.kernel.org/pub/linux/kernel/v6.x/patch-${pkgver}.xz"
         'config'
         # ARCH Patches
         '0101-ZEN_Add_sysctl_and_CONFIG_to_disallow_unprivileged_CLONE_NEWUSER.patch'
@@ -48,7 +48,7 @@ source=("https://git.kernel.org/torvalds/t/linux-${_basekernel}.tar.gz"
 
 sha256sums=('6246ee76209fb1ff46ffcd67d0cc8029dec2ef929de32ef5460a7a5649583103'
             '9268c5f79c00caf77e4be77795e26be36862eb60fd0d78a2f6bc5baeac84dd82'
-            'c01eee0e700bc16acd5b833a2c5dc9285549b0d7ee397df3904ddc9b76ff41ef'
+            'db37188afe063cc6bbeb1bc8b8ae63ef747d56556d4088a0267c21a2b3f7941f'
             'de35604b1337f3d7cd7ce8dc02a741bfdde05709f22f4dfd29d065b20b517e4c'
             '982806daa2c789a63cf685eef71a82754b0530852b7ba130cc9d4025dab79b2f'
             '0a32a567966d7c33035634c46d56073e8a6f66e4d9729b8b25d09579d00c3e7b'
@@ -69,11 +69,15 @@ sha256sums=('6246ee76209fb1ff46ffcd67d0cc8029dec2ef929de32ef5460a7a5649583103'
             '27471eee564ca3149dd271b0817719b5565a9594dc4d884fe3dc51a5f03832bc'
             'b6e695edbe349505a89c98054a54443acd90830a312cd035393c5c0a624e45c0'
             '035ea4b2a7621054f4560471f45336b981538a40172d8f17285910d4e0e0b3ef'
-            '5f2d2c4ab326830df11d5bc985feab2988ee929bbf249f85453536e1998951bd')
+            '60fc3f22d49c6aedf614af07582328ad0119166484e6d5042bcd3b40e7745479')
+
+validpgpkeys=(647F28654894E3BD457199BE38DBBDC86092693E)
 
 prepare() {
   cd "linux-${_basekernel}"
 
+  unset RUSTC
+  cp ~/.cargo/bin/bindgen{-0.62.0,}
   # add upstream patch
   msg "add upstream patch"
   patch -p1 -i "../patch-${pkgver}"
@@ -82,14 +86,15 @@ prepare() {
   for src in "${source[@]}"; do
       src="${src%%::*}"
       src="${src##*/}"
-      [[ $src = *.patch ]] || continue
-      msg2 "Applying patch: $src..."
-      patch -Np1 < "../$src"
+      if [[ $src =~ .*\.patch ]]; then
+              msg2 "Applying patch: $src..."
+              patch -Np1 < "../$src"
+      elif [[ $src =~ .*\.gitpatch ]]; then
+              msg2 "Applying gitpatch: $src..."
+              git --git-dir= apply -p1 --stat --ignore-whitespace --apply "../$src"
+      fi
   done
 
-  msg2 "Applying 0999-acs.gitpatch"
-  patch --ignore-whitespace --fuzz 3 -p1 < "../0999-acs.gitpatch"
-
   msg2 "add config"
   cat "../config" > ./.config
 
@@ -108,6 +113,8 @@ prepare() {
   msg "get kernel version"
   make prepare
 
+  make menuconfig
+
   msg "rewrite configuration"
   yes "" | make config >/dev/null
 }
@@ -115,8 +122,10 @@ prepare() {
 build() {
   cd "linux-${_basekernel}"
 
+  unset RUSTC
+  sudo choom -n -1000 -p $$
   msg "build"
-  make ${MAKEFLAGS} LOCALVERSION= bzImage modules
+  make LLVM=1 ${MAKEFLAGS} LOCALVERSION= bzImage modules
 }
 
 package_linux61() {
@@ -153,7 +162,7 @@ package_linux61() {
 
 package_linux61-headers() {
   pkgdesc="Header files and scripts for building modules for ${pkgbase/linux/Linux} kernel"
-  depends=('gawk' 'python' 'libelf' 'pahole')
+  depends=('gawk' 'python' 'libelf' 'pahole' 'python-ply' 'perl')
   provides=("linux-headers=$pkgver")
 
   cd "linux-${_basekernel}"
diff --git a/config b/config
index a7f0380..9ca17a0 100644
--- a/config
+++ b/config
@@ -2,23 +2,25 @@
 # Automatically generated file; DO NOT EDIT.
 # Linux/x86 6.1.83-1 Kernel Configuration
 #
-CONFIG_CC_VERSION_TEXT="gcc (GCC) 13.2.1 20230801"
-CONFIG_CC_IS_GCC=y
-CONFIG_GCC_VERSION=130201
-CONFIG_CLANG_VERSION=0
-CONFIG_AS_IS_GNU=y
-CONFIG_AS_VERSION=24200
-CONFIG_LD_IS_BFD=y
-CONFIG_LD_VERSION=24200
-CONFIG_LLD_VERSION=0
+CONFIG_CC_VERSION_TEXT="clang version 16.0.6"
+CONFIG_GCC_VERSION=0
+CONFIG_CC_IS_CLANG=y
+CONFIG_CLANG_VERSION=160006
+CONFIG_AS_IS_LLVM=y
+CONFIG_AS_VERSION=160006
+CONFIG_LD_VERSION=0
+CONFIG_LD_IS_LLD=y
+CONFIG_LLD_VERSION=160006
+CONFIG_RUST_IS_AVAILABLE=y
 CONFIG_CC_CAN_LINK=y
 CONFIG_CC_CAN_LINK_STATIC=y
 CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
 CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
-CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
+CONFIG_TOOLS_SUPPORT_RELR=y
 CONFIG_CC_HAS_ASM_INLINE=y
 CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
 CONFIG_PAHOLE_VERSION=126
+CONFIG_CONSTRUCTORS=y
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 CONFIG_THREAD_INFO_IN_TASK=y
@@ -206,9 +208,8 @@ CONFIG_UCLAMP_BUCKETS_COUNT=5
 CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
 CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
 CONFIG_CC_HAS_INT128=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
 CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_CC_NO_ARRAY_BOUNDS=y
 CONFIG_ARCH_SUPPORTS_INT128=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
@@ -311,6 +312,9 @@ CONFIG_PERF_EVENTS=y
 
 CONFIG_SYSTEM_DATA_VERIFICATION=y
 CONFIG_PROFILING=y
+CONFIG_RUST=y
+CONFIG_RUSTC_VERSION_TEXT="rustc 1.62.0 (a8314ef7d 2022-06-27)"
+CONFIG_BINDGEN_VERSION_TEXT="bindgen 0.62.0"
 CONFIG_TRACEPOINTS=y
 # end of General setup
 
@@ -708,7 +712,6 @@ CONFIG_AMD_NB=y
 # Binary Emulations
 #
 CONFIG_IA32_EMULATION=y
-# CONFIG_X86_X32_ABI is not set
 CONFIG_COMPAT_32=y
 CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
@@ -820,8 +823,12 @@ CONFIG_STACKPROTECTOR=y
 CONFIG_STACKPROTECTOR_STRONG=y
 CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
 CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
+CONFIG_HAS_LTO_CLANG=y
 CONFIG_LTO_NONE=y
+# CONFIG_LTO_CLANG_FULL is not set
+# CONFIG_LTO_CLANG_THIN is not set
 CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
+# CONFIG_CFI_CLANG is not set
 CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
 CONFIG_HAVE_CONTEXT_TRACKING_USER=y
 CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
@@ -895,8 +902,6 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
 # end of GCOV-based kernel profiling
 
 CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_GCC_PLUGINS=y
-# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
 # end of General architecture-dependent options
 
 CONFIG_RT_MUTEXES=y
@@ -1030,16 +1035,16 @@ CONFIG_SWAP=y
 CONFIG_ZSWAP=y
 CONFIG_ZSWAP_DEFAULT_ON=y
 # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
-# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
+CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
 # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
 # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
 # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
-CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
-CONFIG_ZSWAP_COMPRESSOR_DEFAULT="zstd"
-# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
-CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD=y
+# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
+CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
+CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
+# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
 # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
-CONFIG_ZSWAP_ZPOOL_DEFAULT="z3fold"
+CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
 CONFIG_ZBUD=y
 CONFIG_Z3FOLD=y
 CONFIG_ZSMALLOC=y
@@ -2508,13 +2513,13 @@ CONFIG_CDROM=m
 # CONFIG_PARIDE is not set
 CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
 CONFIG_ZRAM=m
-CONFIG_ZRAM_DEF_COMP_LZORLE=y
-# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
+# CONFIG_ZRAM_DEF_COMP_LZORLE is not set
+CONFIG_ZRAM_DEF_COMP_ZSTD=y
 # CONFIG_ZRAM_DEF_COMP_LZ4 is not set
 # CONFIG_ZRAM_DEF_COMP_LZO is not set
 # CONFIG_ZRAM_DEF_COMP_LZ4HC is not set
 # CONFIG_ZRAM_DEF_COMP_842 is not set
-CONFIG_ZRAM_DEF_COMP="lzo-rle"
+CONFIG_ZRAM_DEF_COMP="zstd"
 CONFIG_ZRAM_WRITEBACK=y
 # CONFIG_ZRAM_MEMORY_TRACKING is not set
 CONFIG_BLK_DEV_LOOP=m
@@ -5584,7 +5589,6 @@ CONFIG_REGULATOR_ATC260X=m
 CONFIG_REGULATOR_AXP20X=m
 CONFIG_REGULATOR_BCM590XX=m
 CONFIG_REGULATOR_BD9571MWV=m
-CONFIG_REGULATOR_DA903X=m
 CONFIG_REGULATOR_DA9052=m
 CONFIG_REGULATOR_DA9055=m
 CONFIG_REGULATOR_DA9062=m
@@ -10408,16 +10412,15 @@ CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
 # CONFIG_INIT_STACK_NONE is not set
 # CONFIG_INIT_STACK_ALL_PATTERN is not set
 CONFIG_INIT_STACK_ALL_ZERO=y
-# CONFIG_GCC_PLUGIN_STACKLEAK is not set
 CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
 # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
 CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
 # CONFIG_ZERO_CALL_USED_REGS is not set
 # end of Memory initialization
 
+CONFIG_CC_HAS_RANDSTRUCT=y
 CONFIG_RANDSTRUCT_NONE=y
 # CONFIG_RANDSTRUCT_FULL is not set
-# CONFIG_RANDSTRUCT_PERFORMANCE is not set
 # end of Kernel hardening options
 # end of Security options
 
@@ -10569,7 +10572,7 @@ CONFIG_CRYPTO_CRC64_ROCKSOFT=y
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_842=m
 CONFIG_CRYPTO_LZ4=y
 CONFIG_CRYPTO_LZ4HC=m
@@ -10913,15 +10916,14 @@ CONFIG_DEBUG_INFO_DWARF5=y
 # CONFIG_DEBUG_INFO_SPLIT is not set
 CONFIG_DEBUG_INFO_BTF=y
 CONFIG_PAHOLE_HAS_SPLIT_BTF=y
+CONFIG_PAHOLE_HAS_BTF_TAG=y
 CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y
 CONFIG_DEBUG_INFO_BTF_MODULES=y
 # CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set
 # CONFIG_GDB_SCRIPTS is not set
 CONFIG_FRAME_WARN=2048
 CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_READABLE_ASM is not set
 # CONFIG_HEADERS_INSTALL is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_OBJTOOL=y
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
@@ -10990,6 +10992,7 @@ CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
 CONFIG_HAVE_ARCH_KASAN=y
 CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
 CONFIG_CC_HAS_KASAN_GENERIC=y
+CONFIG_CC_HAS_KASAN_SW_TAGS=y
 CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
 # CONFIG_KASAN is not set
 CONFIG_HAVE_ARCH_KFENCE=y
@@ -10999,6 +11002,8 @@ CONFIG_KFENCE_NUM_OBJECTS=255
 CONFIG_KFENCE_DEFERRABLE=y
 CONFIG_KFENCE_STRESS_TEST_FAULTS=0
 CONFIG_HAVE_ARCH_KMSAN=y
+CONFIG_HAVE_KMSAN_COMPILER=y
+# CONFIG_KMSAN is not set
 # end of Memory Debugging
 
 CONFIG_DEBUG_SHIRQ=y
@@ -11145,7 +11150,7 @@ CONFIG_DYNAMIC_EVENTS=y
 CONFIG_PROBE_EVENTS=y
 CONFIG_BPF_KPROBE_OVERRIDE=y
 CONFIG_FTRACE_MCOUNT_RECORD=y
-CONFIG_FTRACE_MCOUNT_USE_CC=y
+CONFIG_FTRACE_MCOUNT_USE_OBJTOOL=y
 CONFIG_TRACING_MAP=y
 CONFIG_SYNTH_EVENTS=y
 CONFIG_HIST_TRIGGERS=y
@@ -11263,5 +11268,7 @@ CONFIG_MEMTEST=y
 #
 # Rust hacking
 #
+# CONFIG_RUST_DEBUG_ASSERTIONS is not set
+CONFIG_RUST_OVERFLOW_CHECKS=y
 # end of Rust hacking
 # end of Kernel hacking