Skip to content

Latest commit

 

History

History
108 lines (105 loc) · 9.78 KB

CHANGELOG.md

File metadata and controls

108 lines (105 loc) · 9.78 KB

Changelog

v1.0.0

ATTENTION: Breaking changes! The config is now done in the config.ini. All values from the utils.py gets lost. The changes in the config.ini will persists future updates.

  • Added: self.unique_identifier to the battery class. Used to identify a BMS when multiple BMS are connected - planned for future use by @mr-manuel
  • Added: Alert is triggered, when BMS communication is lost by @mr-manuel
  • Added: Apply max voltage, if CVCM_ENABLE is False. Before float voltage was applied by @mr-manuel
  • Added: Balancing status for JKBMS by @mr-manuel
  • Added: Balancing switch status for JKBMS by @mr-manuel
  • Added: Balancing switch status to the GUI -> SerialBattery -> IO by @mr-manuel
  • Added: Block charge/discharge when BMS communication is lost. Can be enabled trough the config file by @mr-manuel
  • Added: Charge Mode display by @mr-manuel
  • Added: Check minimum required Venus OS version before installing by @mr-manuel
  • Added: Choose how battery temperature is assembled (mean temp 1 & 2, only temp 1 or only temp 2) by @mr-manuel
  • Added: Config file by @ppuetsch
  • Added: Create empty config.ini for easier user usage by @mr-manuel
  • Added: Cronjob to restart Bluetooth service every 12 hours by @mr-manuel
  • Added: Daly BMS - Discharge / Charge Mosfet switching over remote console/GUI Louisvdw#26 by @transistorgit
  • Added: Daly BMS - Read capacity Louisvdw#594 by @transistorgit
  • Added: Daly BMS - Read production date and build unique identifier by @transistorgit
  • Added: Daly BMS - Set SoC by @transistorgit
  • Added: Daly BMS - Show "battery code" field that can be set in the Daly app by @transistorgit
  • Added: Device name field (found in the GUI -> SerialBattery -> Device), that show a custom string that can be set in some BMS, if available by @mr-manuel
  • Added: Driver uninstall script by @mr-manuel
  • Added: Fix for Venus OS >= v3.00~14 showing unused items Louisvdw#469 by @mr-manuel
  • Added: HeltecSmartBMS driver by @ramack
  • Added: HighInternalTemperature alarm (MOSFET) for JKBMS by @mr-manuel
  • Added: HLPdata BMS driver by @ peterohman
  • Added: Improved maintainability (flake8, black lint), introduced code checks and automate release build Louisvdw#386 by @ppuetsch
  • Added: Install needed Bluetooth components automatically after a Venus OS upgrade by @mr-manuel
  • Added: JKBMS - MOS temperature Louisvdw#440 by @baphomett
  • Added: JKBMS - Uniqie identifier and show "User Private Data" field that can be set in the JKBMS App to identify the BMS in a multi battery environment by @mr-manuel
  • Added: JKBMS BLE - Balancing switch status by @mr-manuel
  • Added: JKBMS BLE - Capacity by @mr-manuel
  • Added: JKBMS BLE - Cell imbalance alert by @mr-manuel
  • Added: JKBMS BLE - Charging switch status by @mr-manuel
  • Added: JKBMS BLE - Discharging switch status by @mr-manuel
  • Added: JKBMS BLE - MOS temperature by @mr-manuel
  • Added: JKBMS BLE - Show if balancing is active and which cells are balancing by @mr-manuel
  • Added: JKBMS BLE - Show serial number and "User Private Data" field that can be set in the JKBMS App to identify the BMS in a multi battery environment by @mr-manuel
  • Added: JKBMS BLE driver by @baranator
  • Added: LLT/JBD BMS BLE driver by @idstein
  • Added: Possibility to add config.ini to the root of a USB flash drive on install via the USB method by @mr-manuel
  • Added: Possibility to configure a VOLTAGE_DROP voltage, if you are using a SmartShunt as battery monitor as there is a little voltage difference Louisvdw#632 by @mr-manuel
  • Added: Post install notes by @mr-manuel
  • Added: Read charge/discharge limits from JKBMS by @mr-manuel
  • Added: Recalculation interval in linear mode for CVL, CCL and DCL by @mr-manuel
  • Added: Rename TAR file after USB/SD card install to not overwrite the data on every reboot Louisvdw#638 by @mr-manuel
  • Added: Reset values to None, if battery goes offline (not reachable for 10s). Fixes Louisvdw#193 Louisvdw#64 by @transistorgit
  • Added: Script to install directly from repository by @mr-manuel
  • Added: Seplos BMS driver by @wollew
  • Added: Serial number field (found in the GUI -> SerialBattery -> Device), that show the serial number or a unique identifier for the BMS, if available by @mr-manuel
  • Added: Show charge mode (absorption, bulk, ...) in Parameters page by @mr-manuel
  • Added: Show charge/discharge limitation reason by @mr-manuel
  • Added: Show MOSFET temperature for JKBMS Louisvdw#440 by @baphomett
  • Added: Show serial number (used for unique identifier) and device name (custom BMS field) in the remote console/GUI to identify a BMS in a multi battery environment by @mr-manuel
  • Added: Show specific TimeToSoC points in GUI, if 0%, 10%, 20%, 80%, 90% and/or 100% are selected by @mr-manuel
  • Added: Show TimeToGo in GUI only, if enabled by @mr-manuel
  • Added: Support for HLPdata BMS4S Louisvdw#505 by @peterohman
  • Added: Support for Seplos BMS Louisvdw#530 by @wollew
  • Added: Temperature 1-4 are now also available on the dbus and MQTT by @idstein
  • Added: Temperature name for temperature sensor 1 & 2. This allows to see which sensor is low and high (e.g. battery and cable) by @mr-manuel
  • Changed: reinstall-local.sh to recreate /data/conf/serial-starter.d, if deleted by disable.sh --> to check if the file conf/serial-starter.d could now be removed from the repository by @mr-manuel
  • Changed: Added QML to restore-gui.sh by @mr-manuel
  • Changed: Bash output by @mr-manuel
  • Changed: CVL calculation improvement. Removed cell voltage penalty. Replaced by automatic voltage calculation. Max voltage is kept until cells are balanced and reset when cells are inbalanced or SoC is below threshold by @mr-manuel
  • Changed: Daly BMS - Fixed BMS alerts by @mr-manuel
  • Changed: Daly BMS - Improved driver stability by @transistorgit & @mr-manuel
  • Changed: Daly BMS - Reworked serial parser by @transistorgit
  • Changed: Default config file by @ppuetsch
    • Added missing descriptions to make it much clearer to understand by @mr-manuel
    • Changed name from default_config.ini to config.default.ini Louisvdw#412 (comment) by @mr-manuel
    • Changed TimeToSoc default value TIME_TO_SOC_VALUE_TYPE from Both seconds and time string "<seconds> [<days>d <hours>h <minutes>m <seconds>s]" to 1 Seconds by @mr-manuel
    • Changed TimeToSoc description by @mr-manuel
    • Changed value positions, added groups and much clearer descriptions by @mr-manuel
  • Changed: Default FLOAT_CELL_VOLTAGE from 3.350 V to 3.375 V by @mr-manuel
  • Changed: Default LINEAR_LIMITATION_ENABLE from False to True by @mr-manuel
  • Changed: Disabled ANT BMS by default Louisvdw#479 by @mr-manuel
  • Changed: Driver can now also start without serial adapter attached for Bluetooth BMS by @seidler2547
  • Changed: Feedback from BMS driver to know, if BMS is found or not by @mr-manuel
  • Changed: Fix for Louisvdw#239 by @mr-manuel
  • Changed: Fix for Louisvdw#311 by @mr-manuel
  • Changed: Fix for Louisvdw#351 by @mr-manuel
  • Changed: Fix for Louisvdw#397 by @transistorgit
  • Changed: Fix for Louisvdw#421 by @mr-manuel
  • Changed: Fix for Louisvdw#450 by @mr-manuel
  • Changed: Fix for Louisvdw#648 by @mr-manuel
  • Changed: Fixed black lint errors by @mr-manuel
  • Changed: Fixed cell balancing background for cells 17-24 by @mr-manuel
  • Changed: Fixed cell balancing display for JBD/LLT BMS Louisvdw#359 by @mr-manuel
  • Changed: Fixed Time-To-Go is not working, if TIME_TO_SOC_VALUE_TYPE is set to other than 1 Louisvdw#424 (comment) by @mr-manuel
  • Changed: Improved install workflow via USB flash drive by @mr-manuel
  • Changed: Improved JBD BMS soc calculation Louisvdw#439 by @aaronreek
  • Changed: Logging to get relevant data by @mr-manuel
  • Changed: Many code improvements Louisvdw#393 by @ppuetsch
  • Changed: Moved Bluetooth part to reinstall-local.sh by @mr-manuel
  • Changed: Moved BMS scripts to subfolder by @mr-manuel
  • Changed: Removed all wildcard imports and fixed black lint errors by @mr-manuel
  • Changed: Renamed scripts for better reading #532 by @mr-manuel
  • Changed: Reworked and optimized installation scripts by @mr-manuel
  • Changed: Separate Time-To-Go and Time-To-SoC activation by @mr-manuel
  • Changed: Serial-Starter file is now created from reinstall-local.sh. Fixes also Louisvdw#520 by @mr-manuel
  • Changed: Temperature alarm changed in order to not trigger all in the same condition for JKBMS by @mr-manuel
  • Changed: Time-To-Soc repetition from cycles to seconds. Minimum value is every 5 seconds. This prevents CPU overload and ensures system stability. Renamed TIME_TO_SOC_LOOP_CYCLES to TIME_TO_SOC_RECALCULATE_EVERY by @mr-manuel
  • Changed: Time-To-Soc string from days, HR:MN:SC to <days>d <hours>h <minutes>m <seconds>s (same as Time-To-Go) by @mr-manuel
  • Changed: Uninstall also installed Bluetooth modules on uninstall by @mr-manuel