Parts to Laser Cut

Kits

All laser cut parts are now offered as kits from SeeMeCNC

• Delrin Piece Kit
• Acrylic Back Panel
• Acrylic Ethernet-Side Side Panel
• Acrylic 120v Plug Side Panel

Notes on File Types

Two types of file versions are available:

• offset
• original

Most laser cutters will directly trace the lines and arcs present in a DXF file. For these laser cutters, use the offset files. The offset files roughly account for the approximate width of the laser cutter focal point and will provide more dimensionally-accurate parts.

For the few laser cutters that perform kerf compensation, use the original files.

If you are unsure, using the offset files is probably your best bet.

Delrin Laser-Cut Parts and Quantities

1/16th in. Delrin

• 2x Cinch Plate
• 2x Back Pulley Reinforcement Plate
• 2x Crossbar Pulley Reinforcement Plate
• 2x Motor Pulley Reinforcement Plate

3/32nd in. Delrin

• 1x Spring Slide Face

1/8th in. Delrin

• 2x Compression Flexure per tool

Acrylic Laser-Cut Parts and Quantities

1/8in (~3mm) Acrylic

• 1x electronics panel
• 1x Ethernet-Side Side Panel
• 1x 120v Plug Side Panel

Sourcing Sheet Stock

Delrin can be purchased in various widths from OnlineMetals.com and Eplastics.com

Online Metals

• 1/16 in. (1.57mm) Delrin Sheet Stock
• 3/32nd in. (2.38mm) Delrin Sheet Stock
• 1/8 in. (3.175mm) Delrin sheet stock

EPlastics

• 1/16 in. (1.57mm) Delrin Sheet Stock
• 3/32nd in. (2.38mm) Delrin Sheet Stock
• 1/8 in. (3.175mm) Delrin sheet stock

McMaster-Carr

McMaster-Carr also sells Delrin, but it is not packed flat and may warp in transit.