This was a little project for my old Sony Xperia XZ1 compact. After a few years, its battery are no longer doing so well, so i thought it could be a fun project to make a battery case for it. Doing this effectively doubled the original battery capacity (added a 3000mAh battery).
For the project i used 3 off the shelf components, being a 3000mAh battery, a charger board and a angled USB-C wire. All items was brought on E-Bay, with the links under the picture.
 |
 |
 |
|---|---|---|
| Charger Board | Battery | USB-C Cable |
The charger board also have a normal USB interface on the back of it, so wiring is fairly self explanatory.
 |
 |
 |
 |
|---|---|---|---|
| Bottom Part | Bottom Part Lid | Top Part | Top Part Lid |
The parts are put together with some small 4mm M2 screws and bolts that i had.
The config for a SnapMaker Original can be found under "Printing Config"
General config:
| Setting | Value |
|---|---|
| Layer Height | 0.2mm |
| Top Thickness | 0.8mm |
| Infil | 35% |