Skip to content

Latest commit

 

History

History
25 lines (17 loc) · 795 Bytes

README.md

File metadata and controls

25 lines (17 loc) · 795 Bytes

Tamago Example for Pi Zero

This is an example 'hello world' type application that runs on the Raspberry Pi Zero. The example just flashes the on-board activity LED. Connect a UART cable to see diagnostic output.

Prerequisites

To use this example, you need:

  • A FAT-formatted micro-SD card with the Raspberry Pi bootloader present (bootcode.bin, start.elf, fixup.dat)

Build & install example

export TAMAGO=~/work/tamago-go/bin/go
export CROSS_COMPILE=arm-linux-gnueabi-
export INSTALLDIR=/mnt/sdcard
make install

The install target will perform these steps:

  1. Compile the example using TAMAGO Go compiler
  2. Copy these files to the SD card:
    • config.txt (the Pi config to load the example as a 'kernel')
    • example-pi-zero.bin (the example)