Update Evertz_9000RF-Probe.md

connector/doc/Evertz_9000RF-Probe.md

@@ -38,7 +38,6 @@ SNMP CONNECTION:
 
 - **IP address/host**: The polling IP or URL of the destination.
 - **IP port**: The IP port of the destination (default: *161*).
-- **Bus address**: The bus address of the device.
 
 SNMP Settings:
 
@@ -47,7 +46,7 @@ SNMP Settings:
 
 ## How to use
 
-This connector communicates with the 9000RF-Probe device via SNMP, and it can export DVEs for each of the RF Inputs.
+This connector communicates with the 9000RF-Probe device via SNMP, and it can export DVEs for each of the RF Inputs. To enable DVE creation, tick the Enable DVE child creation checkbox in the advanced element settings.
 
 The following data pages are available in the main element:
 
@@ -57,6 +56,9 @@ The following data pages are available in the main element:
 
 - **RF Inputs**: Contains the details of the RF Probe Inputs and Channels. In the *RF Configuration* Table, the *Device DVE* setting allows generation of DVEs based on the RF Input.
 
-- **Channel Polling Manager**: This page allows the enabling or disabling of polling for certain channels. This can be used to disable polling for channels that are not in use.
+- **Channel Polling Manager**: This page allows the enabling or disabling of polling for certain channels. This can be used to disable polling for channels that are not in use. The default polling state is disabled. Using the *disable all polling* and *enable all polling*, you can disable all channels or enable all channels for polling at once.
 
-- **Traps**: This page lists the received traps from the device.
+- **Traps**: This page lists the received traps from the device. The traps will get cleared on an element restart and based on the settings provided. Based on the cleanup method, you can choose to clean up traps by age, by max count or both. If you choose to clean up traps by max count, the number of traps to be cleared at a time when it reaches the max count can be set under the deletion amount.
+
+### Maintenance Windows
+During maintenance windows, it is noted that traps are sent very frequently for channels under maintenance which can cause excessive polling of data on the tables. To prevent such, please disable polling on the channels undergoing maintenance in the channel polling manager.