Review

connector/doc/Bridge_Technologies_VB_Probe_Series.md

@@ -72,7 +72,7 @@ Once the element has been created in DataMiner, the **Element Configuration** pa
 
 ### Redundancy
 
-RF Redundancy is accessible via the Redundancy Page. The Active Input can only be set during Manual mode.
+You can access RF redundancy on the Redundancy page. The active input can only be set while *Manual* mode is active.
 
 ### Web Interface
 

connector/doc/Kvarta_DVB_Stream_Monitor.md

@@ -10,13 +10,13 @@ The DVB Stream Monitor is a solution for DVB-C and/or IPTV monitoring for unicas
 
 ### Version Info
 
-| Range | Key Features | Based on | System Impact |
-|--|--|--|--|
-| 1.0.0.x | Initial version | - | - |
-| 1.1.0.x [Obsolete] | New firmware version with different enterprise OID. Some parameters were no longer available on the new MIB. | 1.0.0.2 |  |
-| 1.1.1.x | Removed EPG table and refresh mechanism. Improved buffering system. | 1.0.1.1 |  |
-| 1.1.2.x [SLC Main] | Introduced partial table option in the following tables: Service, PMT, SDT, NIT, AIT, Cable Delivery | 1.1.1.4 |  |
-| 1.2.2.x [SLC Main] | Introduce BAT table and different display modes: Basic, Intermediate, Full| 1.1.2.4 |  |
+| Range              | Key Features                                                                                                 | Based on | System Impact |
+|--------------------|--------------------------------------------------------------------------------------------------------------|----------|---------------|
+| 1.0.0.x            | Initial version.                                                                                             | -        | -             |
+| 1.1.0.x [Obsolete] | New firmware version with different enterprise OID. Some parameters were no longer available on the new MIB. | 1.0.0.2  | -             |
+| 1.1.1.x            | Removed EPG table and refresh mechanism. Improved buffering system.                                          | 1.0.1.1  | -             |
+| 1.1.2.x [SLC Main] | Introduced partial table option in the following tables: Service, PMT, SDT, NIT, AIT, Cable Delivery.        | 1.1.1.4  | -             |
+| 1.2.2.x [SLC Main] | Introduced BAT table and different display modes: Basic, Intermediate, Full.                                 | 1.1.2.4  | -             |
 
 ### Product Info
 
@@ -96,6 +96,6 @@ The element has the following data pages:
 
 ### Display Modes
 
-- **Basic**: 	The SNMP tables and the PAT, PMT, SDT, TDT / TOT and CAT tables are polled and updated.
-- **Intermediate**: 	The Basic tables and the EIT table are polled and updated.
-- **Full**: 	All tables including the NIT and BAT table will be polled and updated.
+- **Basic**: The SNMP tables and the PAT, PMT, SDT, TDT/TOT, and CAT tables are polled and updated.
+- **Intermediate**: The basic tables and the EIT table are polled and updated.
+- **Full**: All tables including the NIT and BAT table are polled and updated.

connector/doc/Miranda_IControl_General.md

@@ -19,20 +19,20 @@ From version **2.0.0.17** onwards, sets can be made to cards using the Oxtel pro
 | Range | Description | DCF Integration | Cassandra Compliant |
 |--|--|--|--|
 | 2.0.0.x | Initial version. | No | Yes |
-| 2.0.1.x \[For DM 7.5\] | Only for DataMiner 7.5. Parameter sets on output and switch mode on HCO card added. | No | Yes |
+| 2.0.1.x [For DM 7.5] | Only for DataMiner 7.5. Parameter sets on output and switch mode on HCO card added. | No | Yes |
 | 2.0.2.x | Reviewed standalone parameters and added new parameters for cards LGK-3901 and DSK-3901. | No | Yes |
-| 2.0.3.x \[SLC Main\] | Support added for HDA 1851 card. | No | Yes |
+| 2.0.3.x [SLC Main] | Support added for HDA 1851 card. | No | Yes |
 | 3.0.0.x | Initial version. <br>**Reason**: This is a completely new connector version that was created from scratch. The impact of the changes is such that a new range was required: the information is no longer polled via a serial connection, no IDs have been preserved, etc. <br>**Impact**: All previous references can no longer be used. If they are reused, it can occur that entries in the database, e.g. for trend data, have a different meaning. <br>In this range, all data is polled and can be controlled/set via iControl's REST API. (An iControl license is required for this.) Only the general system parameters are still polled over SNMP like in the 2.0.2.x range. This connector range currently supports **XVP-3901**, **SCO-1421**, **SDA-1402** and **IRG-3401** cards. | Yes | Yes |
-| 3.0.1.x \[Obsolete\] | Based on 3.0.0.15. Changed the discretes of parameter Program Output Status present in Miranda IControl General - SCO-1421 DVEs. | Yes | Yes |
-| 3.0.2.x | Based on 3.0.1.8. Adds connection for HCO GSM Alarms. Supports HCO 3901 cards. **Impact**: Element reconfiguration is needed. | Yes | Yes |
-| 3.0.3.x | Based on 3.0.2.22. Changed the primary key for HDA1911 Export Table. **Impact**: Loss of data for HDA1911 Exported DVEs. | Yes | Yes |
+| 3.0.1.x [Obsolete] | Based on 3.0.0.15. Changed the discretes of parameter Program Output Status present in Miranda IControl General - SCO-1421 DVEs. | Yes | Yes |
+| 3.0.2.x | Based on 3.0.1.8. Adds connection for HCO GSM Alarms. Supports HCO 3901 cards. <br>**Impact**: Element reconfiguration is needed. | Yes | Yes |
+| 3.0.3.x | Based on 3.0.2.22. Changed the primary key for HDA1911 Export Table. <br>**Impact**: Loss of data for HDA1911 exported DVEs. | Yes | Yes |
 
 ### Product Info
 
 | Range                  | Supported Firmware |
 |------------------------|--------------------|
 | 2.0.0.x                | Unknown            |
-| 2.0.1.x \[For DM 7.5\] | Unknown            |
+| 2.0.1.x [For DM 7.5]   | Unknown            |
 | 2.0.2.x                | Unknown            |
 | 2.0.3.x                | Unknown            |
 | 3.0.0.x                | Unknown            |