Skip to content

Commit

Permalink
Merge branch 'SkylineCommunications:main' into main
Browse files Browse the repository at this point in the history
  • Loading branch information
@jwoSkyline
jwoSkyline authored Mar 7, 2024
2 parents 35391e4 + 6c805fe commit 139d748
Show file tree
Hide file tree
Showing 46 changed files with 484 additions and 288 deletions.
12 changes: 6 additions & 6 deletions connector/doc/2WCOM_IP-4C.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,12 +12,12 @@ The information in the element is retrieved via **SNMP** communication.

### Version Info

| **Range** | **Key Features** | **Based on** | **System Impact** |
|----------------------|---------------------------------------|--------------|-----------------------|
| 1.0.0.x [Obsolete] |Initial version. | - | - |
| 1.0.1.x [SLC Main] | Changed display keys for most tables. | 1.0.0.3 | Alarm and trend data. |
| 1.0.2.x | Updated Alarm page layout. | 1.0.1.1 | |
| 1.1.0.x | Support for new firmware. | 1.0.2.3 | |
| Range | Key Features | Based on | System Impact |
|--------------------|---------------------------------------|----------|-----------------------|
| 1.0.0.x [Obsolete] | Initial version. | - | - |
| 1.0.1.x [SLC Main] | Changed display keys for most tables. | 1.0.0.3 | Alarm and trend data. |
| 1.0.2.x | Updated Alarm page layout. | 1.0.1.1 | |
| 1.1.0.x | Support for new firmware. | 1.0.2.3 | |

### Product Info

Expand Down
6 changes: 5 additions & 1 deletion connector/doc/2WCOM_X-4sd.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,19 +12,22 @@ This connector uses SNMP to connect to a redundancy switch with audio conversion

| Range | Key Features | Based on | System Impact |
|----------------------|------------------|--------------|-------------------|
| 1.0.0.x [SLC Main] | Initial version. | - | - |
| 1.0.0.x | Initial version. | - | - |
| 1.1.0.x [SLC Main] | New firmware. | - | - |

### Product Info

| Range | Supported Firmware |
|-----------|------------------------|
| 1.0.0.x | 1.0-rc7 |
| 1.1.0.x | 1.14-rc1 |

### System Info

| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|-----------|---------------------|-------------------------|-----------------------|-------------------------|
| 1.0.0.x | No | Yes | - | - |
| 1.1.0.x | No | Yes | - | - |

## Configuration

Expand Down Expand Up @@ -61,3 +64,4 @@ The following data pages are available:
- **Device Status**: Contains various hardware information such as temperature and voltage status information.
- **Monitoring Settings**: Contains hardware settings for the device.
- **System Settings**: Contains various system settings such as CSL, Ember+, NTP, Headphone, GPO/GPI, and Ethernet information.
- **Polling**: Allows you to configure the polling frequency of the polling groups.
8 changes: 4 additions & 4 deletions connector/doc/ADVA_Optical_Networking_OSA_5422.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,10 +10,10 @@ The ADVA Optical Networking OSA 5422 is an SNMP-based synchronization device. Th

### Version Info

| **Range** | **Key Features** | **Based on** | **System Impact** |
|----------------------|---------------------------------------------------------------------|--------------|--------------------------------------------------------------------------------------------------|
| 1.0.0.x | Initial version. | - | - |
| 1.0.1.x [SLC Main] | Possibility added to enable/disable polling of specific parameters. | 1.0.0.1 | Discrete values have changed (remote gets/sets will no longer work on the old displayed values). |
| Range | Key Features | Based on | System Impact |
|--|--|--|--|
| 1.0.0.x | Initial version. | - | - |
| 1.0.1.x [SLC Main] | Possibility added to enable/disable polling of specific parameters. | 1.0.0.1 | Discrete values have changed (remote gets/sets will no longer work on the old displayed values). |

### Product Info

Expand Down
8 changes: 4 additions & 4 deletions connector/doc/Adtec_EN_Manager.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -14,10 +14,10 @@ This connector uses **SNMP** to retrieve the entity IDs of the different compone

### Version Info

| **Range** | **Description** | **DCF Integration** | **Cassandra Compliant** |
|----------------------------|----------------------------------------------------------------------------------------------------------------------------------|---------------------|-------------------------|
| 1.0.0.x \[SLC Main\] | Initial version. | No | Yes |
| 1.0.1.x (based on 1.0.0.3) | Added support for profiles by adding a new serial connection (Telnet). For more information, refer to the "Notes" section below. | No | Yes |
| Range | Description | DCF Integration | Cassandra Compliant |
|--|--|--|--|
| 1.0.0.x [SLC Main] | Initial version. | No | Yes |
| 1.0.1.x (based on 1.0.0.3) | Added support for profiles by adding a new serial connection (Telnet). For more information, refer to the "Notes" section below. | No | Yes |

### Product Info

Expand Down
36 changes: 18 additions & 18 deletions connector/doc/Adtec_RD-71.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,30 +12,30 @@ This connector was designed for use with the device **Adtec RD-71**. The connect

### Version Info

| **Range** | **Description** | **DCF Integration** | **Cassandra Compliant** |
|-----------------------------------------|----------------------------------------------------------------------------------------------------------------------------------|---------------------|-------------------------|
| 1.0.0.x (Obsolete) | Initial version. | No | Yes |
| 1.0.1.x (Obsolete) | Added DVE support to the connector. | No | Yes |
| 1.0.2.x (Obsolete) | Applied conditional pages instead of DVEs. | No | Yes |
| 1.0.3.x (based on 1.0.2.x) | Fixed PK duplicate issue in the 2050 table. | No | Yes |
| 1.0.4.x (based on 1.0.3.2) | Added support for profiles by adding a new serial connection (Telnet). For more information, refer to the "Notes" section below. | No | Yes |
| 1.1.0.1 (based on 1.0.3.2) [SLC Main] | Compatible with new firmware 2.02.21 and higher. Added reset/reboot buttons. | No | Yes |
| Range | Description | DCF Integration | Cassandra Compliant |
|--|--|--|--|
| 1.0.0.x (Obsolete) | Initial version. | No | Yes |
| 1.0.1.x (Obsolete) | Added DVE support to the connector. | No | Yes |
| 1.0.2.x (Obsolete) | Applied conditional pages instead of DVEs. | No | Yes |
| 1.0.3.x (based on 1.0.2.x) | Fixed PK duplicate issue in the 2050 table. | No | Yes |
| 1.0.4.x (based on 1.0.3.2) | Added support for profiles by adding a new serial connection (Telnet). For more information, refer to the "Notes" section below. | No | Yes |
| 1.1.0.1 (based on 1.0.3.2) [SLC Main] | Compatible with new firmware 2.02.21 and higher. Added reset/reboot buttons. | No | Yes |

### Product Info

| Range | Supported Firmware Version |
|------------------|-----------------------------|
| 1.0.0.x | v 2.02.06 |
| 1.0.1.x | v 2.02.11 |
| 1.0.2.x | v 2.02.11 |
| 1.0.3.x | v 2.02.11 |
| 1.0.4.x | v 2.02.11 |
| 1.1.0.x | v 2.02.21 |
| Range | Supported Firmware Version |
|---------|----------------------------|
| 1.0.0.x | v 2.02.06 |
| 1.0.1.x | v 2.02.11 |
| 1.0.2.x | v 2.02.11 |
| 1.0.3.x | v 2.02.11 |
| 1.0.4.x | v 2.02.11 |
| 1.1.0.x | v 2.02.21 |

### Exported connectors (only in range 1.0.1.x)

| **Exported Connector** | **Description** |
|------------------------------------------------------------------|--------------------------------------------------|
| Exported Connector | Description |
|------------------------------------------------------------|--------------------------------------------------|
| [Adtec RD-71 - PRX](xref:Connector_help_Adtec_RD-71_-_PRX) | Adtec RD-71 with the PRX model demodulator board |
| [Adtec RD-71 - LB](xref:Connector_help_Adtec_RD-71_-_LB) | Adtec RD-71 with the LB model demodulator board |

Expand Down
2 changes: 1 addition & 1 deletion connector/doc/Advantech_ADAM6050.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -8,7 +8,7 @@ The **Advantech ADAM6050** connector is a serial connector used to monitor and c

## About

The **Advantech ADAM6050** is an 18-ch Isolated Digital I/O Modbus TCP Module, which supports High-to-Low Delay Output. With this connector, the outputs can be set for the device. The inputs are only monitored. It's also possible to set the user value, which is the value the user associates with the real value on the device. With the inversion setting, the user value will be the inverted value of the real value on the device.
The **Advantech ADAM6050** is an 18-ch Isolated Digital I/O Modbus TCP Module, which supports High-to-Low Delay Output. With this connector, the outputs can be set for the device. The inputs are only monitored. It is also possible to set the user value, which is the value the user associates with the real value on the device. With the inversion setting, the user value will be the inverted value of the real value on the device.

## Installation and configuration

Expand Down
40 changes: 25 additions & 15 deletions connector/doc/Al_Jazeera_Media_Network_Comms_Manager.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -6,19 +6,33 @@ uid: Connector_help_Al_Jazeera_Media_Network_Comms_Manager

The Al Jazeera Media Network Comms Manager is a virtual connector used to manage a group of connections for a PCR. The PCR does not return information, and as such, is controlled virtually through the connector. No communication is required.

## About
The connector displays a table where you can control Instances, OS IDs, and Tally Colors. These three parameters are used to control the PCRs. CSV functionality is also available.

No traffic will be shown in Stream Viewer for this connector.

The connector is constituted by a simple table where 3 things controllable: Instances, OS ID's and Tally Colors. These three parameters are used to control the PCR's. It's important to notice that no traffic will be seen in Stream Viewer. CSV functionality is also available.
## About

### Version Info

| Range | Description | DCF Integration | Cassandra Compliant |
|------------------|-----------------|---------------------|-------------------------|
| 1.0.0.x | Initial version | No | Yes |
| Range | Features | Based on | System Impact |
|--------------------|------------------|----------|---------------|
| 1.0.0.x [SLC Main] | Initial version. | - | - |

### Product Info

| Range | Supported Firmware |
|---------|--------------------|
| 1.0.0.x | - |

## Installation and configuration
### System Info

Creation
| Range | DCF Integration | Cassandra Compliant | Linked Components | Exported Components |
|---------|-----------------|---------------------|-------------------|---------------------|
| 1.0.0.x | No | Yes | - | - |

## Configuration

### Connections

#### Virtual connection

Expand All @@ -28,16 +42,12 @@ This connector uses a virtual connection and does not require any input during e

### OS Management

In here, the **Tally State Table** can be found. Adding rows to this table can be done on the **Add New Row Instance** parameter. The **instance** needs to have the following format:

PCRxy_OSz

where xy is a number between 01 and 99, and z is a number starting on 1 or higher.
You can add rows to the **Tally State Table** with the **Add New Row Instance** parameter. The **instance** needs to have the following format: `PCRxy_OSz`, where `xy` is a number between 01 and 99, and `z` is a number starting from 1.

The **OS ID**'s should be unique, but are not enforced to allow the user to change between 2 ID's already assigned to different PCR's.
The **OS IDs** must be unique; however, this is not enforced, so that you can change between 2 IDs already assigned to different PCRs.

Here, the CSV Management page can be accessed too. The CSV Management page allows you to set the **full path file** to be used as the CSV (it needs a valid full path, and must end in .csv). It's possible to both **import** a CSV file containing the table configuration, and **export** a CSV file of the current table configuration,
On the CSV Management page, you can set the **full path file** to be used as the CSV (a valid full path is required, ending in .csv). It is possible to both **import** a CSV file containing the table configuration and **export** a CSV file of the current table configuration,

## Notes

A Visio will be available for this connector.
A Visio drawing will be available for this connector.
18 changes: 9 additions & 9 deletions connector/doc/Bridge_Technologies_VB288.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -12,15 +12,15 @@ This connector can be used to monitor and control Bridge Technologies VB288 devi

### Version Info

| **Range** | **Key Features** | **Based on** | **System Impact** |
|----------------------|---------------------------------------------------------------------------------------------------------------------------------------------|--------------|---------------------------------------------------------------|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x | \- Fix for duplicate keys. - New firmware version supported. - DCF interfaces implemented. | 1.0.0.2 | Supported firmware version: 5.1.0.4. |
| 1.1.0.x | \- New firmware version supported. - Unsupported parameters removed. - Audio and video parameters added to the multicast. - Services Table. | 1.0.1.1 | Supported firmware version: 5.4.0.4 |
| 1.2.0.x [Obsolete] |New firmware version supported. | 1.1.0.8 | Supported firmware version: 5.5.0-6. |
| 1.2.1.x | Correct alarm severity discrete parameter PID 1402. | 1.2.0.3 | Alarm monitoring on table Alarms PID 1400 should be reviewed. |
| 1.2.2.x | Change column descriptions: remove prefix and add table name at the end of the description. | 1.2.1.2 | Automation scripts should be reviewed. |
| 1.3.2.x [SLC Main] | New firmware version supported. | 1.2.2.6 | Supported firmware version: 6.1. |
| Range | Key Features | Based on | System Impact |
|--|--|--|--|
| 1.0.0.x | Initial version | - | - |
| 1.0.1.x | - Fix for duplicate keys. <br>- New firmware version supported. <br>- DCF interfaces implemented. | 1.0.0.2 | Supported firmware version: 5.1.0.4. |
| 1.1.0.x | - New firmware version supported. <br>- Unsupported parameters removed. <br>- Audio and video parameters added to the multicast. <br>- Services Table. | 1.0.1.1 | Supported firmware version: 5.4.0.4 |
| 1.2.0.x [Obsolete] | New firmware version supported. | 1.1.0.8 | Supported firmware version: 5.5.0-6. |
| 1.2.1.x | Correct alarm severity discrete parameter PID 1402. | 1.2.0.3 | Alarm monitoring on table Alarms PID 1400 should be reviewed. |
| 1.2.2.x | Change column descriptions: remove prefix and add table name at the end of the description. | 1.2.1.2 | Automation scripts should be reviewed. |
| 1.3.2.x [SLC Main] | New firmware version supported. | 1.2.2.6 | Supported firmware version: 6.1. |

### Product Info

Expand Down
2 changes: 1 addition & 1 deletion connector/doc/Bridge_Technologies_VB_Probe_Series.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -22,7 +22,7 @@ It uses the **EII API (Enterprise Information Integration)** provided by the ven

| Range | Supported Firmware |
|--|--|
| 1.0.0.x / 1.1.0.x | **Firmware 5.4** or higher is required, and the following probe models are supported:<br>- Bridge Technologies VB120<br>- Bridge Technologies VB220<br>- Bridge Technologies VB240<br>- Bridge Technologies VB242<br>- Bridge Technologies VB250<br>- Bridge Technologies VB252<br>- Bridge Technologies VB260<br>- Bridge Technologies VB262<br>- Bridge Technologies VB270<br>- Bridge Technologies VB272<br>- Bridge Technologies VB330 |
| 1.0.0.x / 1.1.0.x | **Firmware 5.4** or higher is required, and the following probe models are supported:<br>- Bridge Technologies VB120<br>- Bridge Technologies VB220<br>- Bridge Technologies VB240<br>- Bridge Technologies VB242<br>- Bridge Technologies VB250<br>- Bridge Technologies VB252<br>- Bridge Technologies VB260<br>- Bridge Technologies VB262<br>- Bridge Technologies VB270<br>- Bridge Technologies VB272<br>- Bridge Technologies VB330<br>- Bridge Technologies VB258 |

### System Info

Expand Down
6 changes: 3 additions & 3 deletions connector/doc/British_Telecom_Global_Site_Load_Balancer.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,9 +10,9 @@ This connector allows you to monitor and control an automatic global site load b

### Version Info

| **Range** | **Key Features** | **Based on** | **System Impact** |
|----------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------|-------------------|
| 1.0.0.x [SLC Main] | \- Initial version. - Load balancer table to check the active location and location status. - Control table for each server to start/stop it. - Functionality to export/import the host mapping table. | - | - |
| Range | Key Features | Based on | System Impact |
|--|--|--|--|
| 1.0.0.x [SLC Main] | - Initial version. <br>- Load balancer table to check the active location and location status. <br>- Control table for each server to start/stop it. <br>- Functionality to export/import the host mapping table. | - | - |

### Product Info

Expand Down
Loading

0 comments on commit 139d748

Please sign in to comment.