ST7567 Display (128x64 lcd display) Component for ESPHome

The st7567 display platform allows you to use ST7567 (Taobao) displays with ESPHome.

Connect the pins according to the item description. CS to cs_pin, RST to reset_pin, A0 to dc_pin, SCK to clk_pin, and finally SDA to mosi_pin.

# Example configuration entry
spi:
    clk_pin: GPIO0
    mosi_pin: GPIO3

display:
    - platform: st7567
      cs_pin: GPIO4
      dc_pin: GPIO5
      reset_pin: GPIO1
      lambda: |-
        it.print(0, 0, id(font), "Hello World!");

Configuration variables:

• cs_pin (Required, :ref:Pin Schema <config-pin_schema>): The Chip Select (CS) pin.
• dc_pin (Required, :ref:Pin Schema <config-pin_schema>): The A0 pin.
• reset_pin (Optional, :ref:Pin Schema <config-pin_schema>): The RESET pin. Defaults to not connected.
• rotation (Optional): Set the rotation of the display. Everything you draw in lambda: will be rotated by this option. One of 0° (default), 90°, 180°, 270°.
• width (Optional, int): Width of the display. Numbers are only allowed between 0~132. Defaults to 128.
• height (Optional, int): Height of the display. Numbers are only allowed between 0~64. Defaults to 64.
• flip_x (Optional, boolean): Flip the horizontal axis on the screen. Defaults to true.
• flip_y (Optional, boolean): Flip the vertical axis on the screen. Defaults to false.
• offset_x (Optional, int): Set this option if some horizontal pixel is missing. Numbers are only allowed between -64~64. Defaults to 0.
• offset_y (Optional, int): Set this option if some vertical pixel is missing. Numbers are only allowed between -32~32. Defaults to 0.
• reg_ratio (Optional, int): Set this option and ev_value to setup contrast. Numbers are only allowed between 0~7. Defaults to 4.
• ev_value (Optional, int): Set this option and reg_ratio to setup contrast. Numbers are only allowed between 0~63. Defaults to 31. A middle value is recommended by the datasheet.
• invert (Optional, boolean): Invert all pixel state on the display. Defaults to false.
• bias_high (Optional, boolean): If set to true, the bias will be 1/7, otherwise it will be 1/9. Defaults to false.
• booster_high (Optional, boolean): If set to true, the booster will be x5, otherwise it will be x4. Defaults to false.
• lambda (Optional, :ref:lambda <config-lambda>): The lambda to use for rendering the content on the display. See :ref:display-engine for more information.
• update_interval (Optional, :ref:config-time): The interval to re-draw the screen. Defaults to 1s.
• pages (Optional, list): Show pages instead of a single lambda. See :ref:display-pages.
• spi_id (Optional, :ref:config-id): Manually specify the ID of the :ref:SPI Component <spi> if you want to use multiple SPI buses.
• id (Optional, :ref:config-id): Manually specify the ID used for code generation.