Switch to TOML for the configuration file.

config.sample.toml

@@ -0,0 +1,83 @@
+# TotalMix Volume Control sample configuration file.
+#
+# All the pre-filled values you see in this file are optional and represent the application
+# defaults.
+#
+# Colors may be specified as regular color names such as "blue", along with hex colors with RGB or
+# ARGB components (note that the alpha channel needs to be first if you ant transparency).
+
+[osc]
+# The hostname port that TotalMix Volume Control should send to. TotalMixFX listens on 0.0.0.0 so
+# the hostname may be any IP address on your network. Generally 127.0.0.1 (localhost) is
+# recommended. The port should be set to match the "Port incoming" setting in TotalMixFX.
+outgoing_hostname = "127.0.0.1"
+outgoing_port = 7001
+
+# The hostname and port that TotalMix Volume Control should receive from. This should be set to
+# match the "Port outgoing" setting in TotalMixFX.
+incoming_hostname = "127.0.0.1"
+incoming_port = 9001
+
+[volume]
+# Whether to use dB units for volume increments and max values. See below for valid values when
+# decibels are used.
+use_decibels = false
+
+# The amount that the volume should be increased when using the volume keys.
+# - Percentage: Up to max of 0.10 which will increase the volume by 10%.
+# - Decibels: Up to max of 3.0 dB in multiples of 0.5 (e.g. 0.5, 1.0, 1.5, etc.).
+increment = 0.02
+
+# The amount that the volume should be increased when using the volume keys and holding shift down.
+# - Percentage: Up to a max of 0.05 which will increase the volume by 5%.
+# - Decibels: Up to max of 1.5 dB in multiples of 0.5 (i.e.. 0.5, 1.0 or 1.5). When using decibels,
+#             it is generally a good idea to ensure the fine increment is a multiple of increment.
+fine_increment = 0.01
+
+# The maximum volume to send.
+# - Percentage: Up to a max of 1.0 which is 100% volume.
+# - Decibels: Up to max of 6.0 dB.
+max = 1.0
+
+[theme]
+# The main widget and tray tooltip background corner rounding and color.
+background_rounding = 10.0
+background_color = "#e21e2328"
+
+# The TotalMix Volume heading text colors.
+heading_totalmix_color = "#ffffff"
+heading_volume_color = "#e06464"
+
+# The main decibel volume readout text colors.
+volume_readout_color_normal = "#ffffff"
+volume_readout_color_dimmed = "#ffa500"
+
+# The horizontal volume bar colors.
+volume_bar_background_color = "#333333"
+volume_bar_foreground_color_normal = "#999999"
+volume_bar_foreground_color_dimmed = "#996500"
+
+# The tray tooltip text message color.
+tray_tooltip_message_color = "#ffffff"
+
+[interface]
+# Scale the interface by a particular factor (e.g. 2.0 will be twice as large).
+scaling = 1.0
+
+# The position offset from the top left corner to display the widget at.
+position_offset = 40.0
+
+# The amount of time in seconds to display the widget upon hitting the volume keys before
+# beginning the fade out animation.
+hide_delay = 2.0
+
+# The duration of the fade out animation in seconds.
+fade_out_time = 1.0
+
+# Whether to show the indicator any time the volume is changed via the device or any other
+# external means (e.g. an RME ARC controller).
+#
+# Please note that in my testing RME devices send volume changes at infrequent but random times,
+# even when the volume has not been changed intentionally. This is ultimately why this setting is
+# off by default.
+show_remote_volume_changes = false