This repository includes some example projects for Arduino, Linux (Raspberry PI & Co.) and Windows (with IO-Warrior as interface).
If you wan to use an IO-Warrior14 module on you I2C-Host, you must use the LED-Warrior14-01 module to protect your SOC board against the IEC62386 bus.
You can use several LED-Warrior14 on the same I2C bus by using different I2C device addresses on each LED-Warrior14. You can change this address by using an I2C command.
Product site for more informations, datasheets, and software/tools for the IO-Warrior devices
Company site for information on more devices.
If you have any questions about the IO-Warrior please contact support@codemercs.com or using the issues section in this repository. There is also a company forum with many solved questions.