From 647cd59cff33ad5b8652e2dda88c0b13c5fd5333 Mon Sep 17 00:00:00 2001 From: mrosseel Date: Thu, 21 Dec 2023 11:39:05 +0100 Subject: [PATCH] Update build_guide.rst typo --- docs/source/build_guide.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/source/build_guide.rst b/docs/source/build_guide.rst index b87a4a45..b436d7b6 100644 --- a/docs/source/build_guide.rst +++ b/docs/source/build_guide.rst @@ -268,7 +268,7 @@ Printing These pieces will print without supports in the orientation shown in the photos. I use 3 perimeter layers and 15% infill, but the pieces are not large and don't need to handle heavy forces so almost any print settings should work. -You will want to consider using a material other than PLA, as your PiFinder is likely to experience some sunlight in it's lifetime and PLA degrades under moderate heat and UV. PETG or some co-polymer like NGen would be a good choice. Prusamint Galaxy PETG is the official PiFinder filament and is pictured in most of the build guide, except where grey provided needed contrast. +You will want to consider using a material other than PLA, as your PiFinder is likely to experience some sunlight in it's lifetime and PLA degrades under moderate heat and UV. PETG or some co-polymer like NGen would be a good choice. Prusament Galaxy PETG is the official PiFinder filament and is pictured in most of the build guide, except where grey provided needed contrast. Inserts -------