POST error codes

101 = interrupt failure
102 = timer failure
103 = timer interrupt failure
104 = protected mode failure
105 = last 8042 command not accepted
107 = hot NMI test (NAC parity check)
109 = ???
111 = ???
161 = RTC power fail
162 = configuration error (run CONFIGURE)
163 = Time & date not set (run CONFIGURE) / RTC error
164 = memory size error
190 = system ROM checksum failure
201 = Memory test failed
203 = memory address error or refresh failure (Lines 16-23)
301 = ???
303 = Keyboard or system board error
304 = system board error
305 = PS/2 - keyboard +5v error (bad 3A fuse)
2401 = display error
601 = floppy drive 0 error / not present
603 = floppy drive controller error
1308 = audio/joystick card error
1701 = HDD controller error
1790 = No HDD - Data cable off - Format not recognized.
114 = external ROM checksum error
1101 = serial port internal error
1180 = ???
8601 = system board error or mouse error
8602 = mouse error
8603 = mouse self-test error