"Multipath seems to be blocked on the connection" is back random

[darkman1983]

Expected Behavior

The above message is not shown.

Current Behavior

The message is totally random displayed, sometimes for one WAN, sometimes for both, sometimes not at all.
With the stable release the message wasn't displayed at all.

MPTCP has connections:

Possible Solution

You tell me.
Between Kernel 6.6 to 6.12 there is a new mecanism added in MPTCP, wich detects it self, if a Path has MPTCP blocked and then avoids this path. I dunno if you could get that value from MPTCP, if yes, it could replace the actual detection.

Steps to Reproduce the Problem

1. Just installed Snapshot build

Context (Environment)

MPTCP seems to be working normal, so the detection on mptcprouter might be broken or is still not functioning.
Sometimes if i restart OMR, the message isn't displayed. Sometimes it appears after some use time.

Specifications

• OpenMPTCProuter version: Version 0.62-snapshot-6.12
• OpenMPTCProuter VPS version: Version 0.1032-test 6.12.5-x64v3-xanmod1
• OpenMPTCProuter VPS provider: HT-Hosting
• OpenMPTCProuter platform: x86_64
• Country: DE

[darkman1983]

After reboot:

[darkman1983]

Now it's all green, it's after a few hours running. Seems the detection is buggy?!

[darkman1983]

And back to Blocked again...
Another one: MPTCP is loosing connections over time and don't open any new ones.

Sidenote: With 6.6 OMR Router part, all was working fine.

[Ysurac]

It's only a warning, not really a priority...

[darkman1983]

Does this block anything? I can't get MPTCP to work correctly on both WAN's, maybe the "Save Settings" bug is influencing here.
But all in all ther seems to be a real problem, because MPTCP-Connections are closed and no new are opened.
Maybe related to the warning or not, but as i stated before, with Routerpart on kernel 6.6 MPTCP was working normal.
I get an empty list for that command.

root@OpenMPTCProuter:~# ss -M
State Recv-Q Send-Q Local Address:Port Peer Address:Port

After rebooting the router:

All is working again.

[Ysurac]

The message doesn't change anything, it's only a test.
Kernel 6.12 based snapshot is still not tested at all.

[lhc1993]

how to close this test？

[lhc1993]

let display keep green @Ysurac