protocol.xml

<?xml version="1.0" encoding="utf-8"?>
<!--

****************************************************************************
*  Copyright (c) 2023,  Skyline Communications NV  All Rights Reserved.    *
****************************************************************************

By using this driver, you expressly agree with the usage terms and
conditions set out below.
This driver and all related materials are protected by copyrights and
other intellectual property rights that exclusively belong
to Skyline Communications.

A user license granted for this driver is strictly for personal use only.
This driver may not be used in any way by anyone without the prior
written consent of Skyline Communications. Any sublicensing of this
driver is forbidden.

Any modifications to this driver by the user are only allowed for
personal use and within the intended purpose of the driver,
and will remain the sole responsibility of the user.
Skyline Communications will not be responsible for any damages or
malfunctions whatsoever of the driver resulting from a modification
or adaptation by the user.

The content of this driver is confidential information.
The user hereby agrees to keep this confidential information strictly
secret and confidential and not to disclose or reveal it, in whole
or in part, directly or indirectly to any person, entity, organization
or administration without the prior written consent of
Skyline Communications.

Any inquiries can be addressed to:

	Skyline Communications NV
	Ambachtenstraat 33
	B-8870 Izegem
	Belgium
	Tel.	: +32 51 31 35 69
	Fax.	: +32 51 31 01 29
	E-mail	: info@skyline.be
	Web		: www.skyline.be
	Contact	: Ben Vandenberghe

-->
<Protocol xmlns="http://www.skyline.be/protocol">
	<Name>Skyline Example OpenConfig</Name>
	<Description>SLC SDF OpenConfig</Description>
	<Version>1.0.0.3</Version>
	<IntegrationID>DMS-DRV-9032</IntegrationID>
	<Provider>Skyline Communications</Provider>
	<Vendor>Skyline Example</Vendor>
	<VendorOID>1.3.6.1.4.1.8813.2.1218</VendorOID>
	<DeviceOID>9</DeviceOID>
	<ElementType>Example</ElementType>
	<Type relativeTimers="true">virtual</Type>
	<Display defaultPage="General" pageOrder="General;Capabilities;System;Interfaces;Openflow" wideColumnPages="Capabilities" />
	<SNMP includepages="true">auto</SNMP>

	<Compliancies>
		<CassandraReady>true</CassandraReady>
		<MinimumRequiredVersion>10.3.3.0 - 12753</MinimumRequiredVersion>
	</Compliancies>

	<Params>
		<Param id="2" trending="false">
			<Name>AfterStartup</Name>
			<Description>After Startup</Description>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
		</Param>
		<Param id="3" trending="false">
			<Name>PollUnsubscribedData</Name>
			<Description>Poll Unsubscribed Data</Description>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
		</Param>
		
		<Param id="10" trending="false" save="true">
			<Name>DataSourceIp</Name>
			<Description>Data Source IP Address</Description>
			<Information>
				<Subtext>Data source IP address</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="11" trending="false" setter="true">
			<Name>DataSourceIp</Name>
			<Description>Data Source IP Address</Description>
			<Information>
				<Subtext>Data source IP address</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="12" trending="false" save="true">
			<Name>DataSourcePort</Name>
			<Description>Data Source Port</Description>
			<Information>
				<Subtext>Data source port.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>1</Low>
					<High>65535</High>
				</Range>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="13" trending="false" setter="true">
			<Name>DataSourcePort</Name>
			<Description>Data Source Port</Description>
			<Information>
				<Subtext>Data source port.</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>1</Low>
					<High>65535</High>
				</Range>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="14" trending="false" save="true">
			<Name>DataSourceUserName</Name>
			<Description>Data Source User Name</Description>
			<Information>
				<Subtext>Data source user name.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>2</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="15" trending="false" setter="true">
			<Name>DataSourceUserName</Name>
			<Description>Data Source User Name</Description>
			<Information>
				<Subtext>Data source user name.</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>2</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="16" trending="false" save="true">
			<Name>DataSourcePassword</Name>
			<Description>Data Source Password</Description>
			<Information>
				<Subtext>Data source password.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>3</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="password">string</Type>
			</Measurement>
		</Param>
		<Param id="17" trending="false" setter="true">
			<Name>DataSourcePassword</Name>
			<Description>Data Source Password</Description>
			<Information>
				<Subtext>Data source password.</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>3</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="password">string</Type>
			</Measurement>
		</Param>
		<Param id="18" trending="false" save="true">
			<Name>ClientCertificate</Name>
			<Description>Client Certificate</Description>
			<Type>read</Type>
			<Information>
				<Subtext>Path to client certificate.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>4</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="19" trending="false" setter="true">
			<Name>ClientCertificate</Name>
			<Description>Client Certificate</Description>
			<Type>write</Type>
			<Information>
				<Subtext>Path to client certificate.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>General</Page>
						<Column>0</Column>
						<Row>4</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="22" trending="false" save="true">
			<Name>GrpcConnectionState</Name>
			<Description>gRPC Connection State</Description>
			<Type>read</Type>
			<Information>
				<Subtext>Keeps track of the gRPC connection state to know if timeout has been set or not.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
		</Param>
		<Param id="102" trending="false">
			<Name>GnmiVersion</Name>
			<!-- SuppressValidator 2.14.7 official description -->
			<Description>gNMI Version</Description>
			<!-- /SuppressValidator 2.14.7 -->
			<Information>
				<Subtext>gNMI version</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="103" trending="true">
			<Name>AsciiEncoding</Name>
			<Description>ASCII Encoding</Description>
			<Information>
				<Subtext>Indicates if ASCII text of an out-of-band agreed format encoding is supported or not.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Not Supported</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Supported</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="104" trending="true">
			<Name>BytesEncoding</Name>
			<Description>Bytes Encoding</Description>
			<Information>
				<Subtext>Indicates if arbitrarily encoded bytes encoding is supported or not.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>2</Row>
					</Position>
				</Positions>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Not Supported</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Supported</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="105" trending="true">
			<Name>JsonEncoding</Name>
			<Description>JSON Encoding</Description>
			<Information>
				<Subtext>Indicates if JSON encoded text is supported or not.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>3</Row>
					</Position>
				</Positions>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Not Supported</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Supported</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="106" trending="true">
			<Name>JsonIetfEncoding</Name>
			<Description>JSON IETF Encoding</Description>
			<Information>
				<Subtext>Indicates if JSON encoded text as per RFC7951 is supported or not.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>4</Row>
					</Position>
				</Positions>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Not Supported</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Supported</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="107" trending="true">
			<Name>ProtoEncoding</Name>
			<Description>Proto Encoding</Description>
			<Information>
				<Subtext>Indicates if encoding according to scalar values of TypedValue is supported or not.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>5</Row>
					</Position>
				</Positions>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Not Supported</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Supported</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		
		<Param id="406" trending="false">
			<Name>SystemStateCurrentDatetime</Name>
			<Description>Current Datetime</Description>
			<Information>
				<Subtext>The system's current datetime when last polled.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Decimals>8</Decimals>
				<Exceptions>
					<Exception id="1" value="0">
						<Display state="disabled">N/A</Display>
						<Value>0</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Decimals>8</Decimals>
				<Positions>
					<Position>
						<Page>System</Page>
						<Column>0</Column>
						<Row>3</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="datetime">number</Type>
			</Measurement>
		</Param>
		<Param id="408" trending="false">
			<Name>SystemStateLoginBanner</Name>
			<Description>Login Banner</Description>
			<Information>
				<Subtext>The system's login banner.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>System</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="409" trending="false">
			<Name>SystemStateLoginBanner</Name>
			<Description>Login Banner</Description>
			<Information>
				<Subtext>The system's login banner.</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>System</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="410" trending="false">
			<Name>SystemStateMotdBanner</Name>
			<Description>Message of the Day Banner</Description>
			<Information>
				<Subtext>The system's message of the day banner.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>System</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="411" trending="false">
			<Name>SystemStateMotdBanner</Name>
			<Description>Message of the Day Banner</Description>
			<Information>
				<Subtext>The system's message of the day banner.</Subtext>
			</Information>
			<Type>write</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>System</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		
		<Param id="500">
			<Name>CapabilitiesModelsTable</Name>
			<Description>Supported Models</Description>
			<Type>array</Type>
			<ArrayOptions index="0">
				<ColumnOption idx="0" pid="501" type="retrieved" options="" />
				<ColumnOption idx="1" pid="502" type="retrieved" options="" />
				<ColumnOption idx="2" pid="503" type="retrieved" options="" />
				<ColumnOption idx="3" pid="504" type="retrieved" options="" />
			</ArrayOptions>
			<Information>
				<Subtext>This table gives an overview of the YANG models this data source supports.</Subtext>
			</Information>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Capabilities</Page>
						<Column>0</Column>
						<Row>6</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="tab=columns:501|0-502|1-503|2-504|3,width:0-200-100-200,sort:STRING-STRING-STRING-STRING,lines:25,filter:true">table</Type>
			</Measurement>
		</Param>
		<Param id="501" trending="false">
			<Name>CapabilitiesModelsTableKey</Name>
			<Description>Key [IDX] (Supported Models)</Description>
			<Information>
				<Subtext>This is the key used internally by DataMiner to identify the table entries.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="502" trending="false">
			<Name>CapabilitiesModelsTableName</Name>
			<Description>Name (Supported Models)</Description>
			<Information>
				<Subtext>Name of the model.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="503" trending="false">
			<Name>CapabilitiesModelsTableVersion</Name>
			<Description>Version (Supported Models)</Description>
			<Information>
				<Subtext>Version of the model.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="504" trending="false">
			<Name>CapabilitiesModelsTableOrganization</Name>
			<Description>Organization (Supported Models)</Description>
			<Information>
				<Subtext>Organization that defined the model.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		
		<Param id="2000" trending="false">
			<Name>InterfacesState</Name>
			<Description>Interfaces State</Description>
			<Type>array</Type>
			<ArrayOptions index="0" options=";naming=/2030">
				<ColumnOption idx="0" pid="2001" type="retrieved" options="" />
				<ColumnOption idx="1" pid="2002" type="retrieved" options="" />
				<ColumnOption idx="2" pid="2003" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="3" pid="2004" type="retrieved" options="" />
				<ColumnOption idx="4" pid="2005" type="retrieved" options="" />
				<ColumnOption idx="5" pid="2006" type="retrieved" options="" />
				<ColumnOption idx="6" pid="2007" type="retrieved" options="" />
				<ColumnOption idx="7" pid="2008" type="retrieved" options="" />
				<ColumnOption idx="8" pid="2009" type="retrieved" options="" />
				<ColumnOption idx="9" pid="2010" type="retrieved" options="" />
				<ColumnOption idx="10" pid="2011" type="retrieved" options="" />
				<ColumnOption idx="11" pid="2012" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="12" pid="2013" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="13" pid="2014" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="14" pid="2015" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="15" pid="2016" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="16" pid="2017" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="17" pid="2018" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="18" pid="2019" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="19" pid="2020" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="20" pid="2021" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="21" pid="2022" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="22" pid="2023" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="23" pid="2024" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="24" pid="2025" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="25" pid="2026" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="26" pid="2027" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="27" pid="2028" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="28" pid="2029" type="retrieved" options="" />
				<ColumnOption idx="29" pid="2030" type="retrieved" options="" />
				<ColumnOption idx="30" pid="2031" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="31" pid="2032" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="32" pid="2033" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
				<ColumnOption idx="33" pid="2034" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap" />
			</ArrayOptions>
			<Information>
				<Subtext>Interfaces state table on change subscription.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Interfaces</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<!-- SuppressValidator 2.31.9 Sorting on datetime column not needed. -->
				<Type options="tab=columns:2001|0-2030|29-2002|1-2003|2-2004|3-2005|4-2006|5-2007|6-2008|7-2009|8-2010|9-2011|10-2012|11-2013|12-2014|13-2015|14-2016|15-2017|16-2018|17-2019|18-2020|19-2021|20-2022|21-2023|22-2024|23-2025|24-2026|25-2027|26-2028|27-2029|28-2031|30-2032|31-2033|32-2034|33,width:100-116-100-100-109-100-100-104-100-123-144-100-100-100-120-134-131-100-100-143-100-100-100-130-144-141-100-100-121-145-120-120-120-120,sort:STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING,lines:25,filter:true">table</Type>
				<!-- /SuppressValidator 2.31.9 -->
			</Measurement>
		</Param>
		<Param id="2001" trending="false">
			<Name>InterfacesStateName</Name>
			<Description>Name (Interfaces State)</Description>
			<Information>
				<Subtext>The name of the interface.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="2002" trending="false">
			<Name>InterfacesStateType</Name>
			<Description>Type (Interfaces State)</Description>
			<Information>
				<Subtext>The interface type.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="2003" trending="true">
			<Name>InterfacesStateMtu</Name>
			<Description>MTU (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Set the max transmission unit size in octets
for the physical interface.  If this is not set, the mtu is
set to the operational default -- e.g., 1514 bytes on an
Ethernet interface.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Octets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
		</Param>
		<Param id="2004" trending="true">
			<Name>InterfacesStateLoopbackMode</Name>
			<Description>Loopback Mode (Interfaces State)</Description>
			<Information>
				<Subtext>Loopback mode.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Disabled</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Enabled</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="2005" trending="false">
			<Name>InterfacesStateDescription</Name>
			<Description>Description (Interfaces State)</Description>
			<Information>
				<Subtext>Description</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="2006" trending="true">
			<Name>InterfacesStateState</Name>
			<Description>State (Interfaces State)</Description>
			<Information>
				<Subtext>State</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Disabled</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Enabled</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
		</Param>
		<Param id="2007" trending="false">
			<Name>InterfacesStateIfIndex</Name>
			<Description>Interface Index (Interfaces State)</Description>
			<Information>
				<Subtext>Index</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="2008" trending="true">
			<Name>InterfacesStateAdminStatus</Name>
			<Description>Admin Status (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The desired state of the interface.  In RFC 7223 this leaf
has the same read semantics as ifAdminStatus.  Here, it
reflects the administrative state as set by enabling or
disabling the interface.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>2</WaH>
				<CH>1</CH>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Up</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Down</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>Testing</Display>
						<Value>2</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="2009" trending="true">
			<Name>InterfacesStateOperStatus</Name>
			<Description>Operational Status (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The current operational state of the interface.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>1;4</Normal>
				<WaH>3;5;6;7</WaH>
				<CH>2</CH>
			</Alarm>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Up</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>Down</Display>
						<Value>2</Value>
					</Discreet>
					<Discreet>
						<Display>Testing</Display>
						<Value>3</Value>
					</Discreet>
					<Discreet>
						<Display>Unknown</Display>
						<Value>4</Value>
					</Discreet>
					<Discreet>
						<Display>Dormant</Display>
						<Value>5</Value>
					</Discreet>
					<Discreet>
						<Display>Not Present</Display>
						<Value>6</Value>
					</Discreet>
					<Discreet>
						<Display>Lower Layer Down</Display>
						<Value>7</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="2010" trending="false">
			<Name>InterfacesStateLastChange</Name>
			<Description>Last Change (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[This timestamp indicates the absolute time of the last
state change of the interface (e.g., up-to-down transition).
This is different than the SNMP ifLastChange object in the
standard interface MIB in that it is not relative to the
system boot time (i.e,. sysUpTime).

The value is the timestamp in nanoseconds relative to
the Unix Epoch (Jan 1, 1970 00:00:00 UTC).]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Decimals>8</Decimals>
				<Exceptions>
					<Exception id="1" value="0">
						<Display state="disabled">N/A</Display>
						<Value>0</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Decimals>8</Decimals>
			</Display>
			<Measurement>
				<Type options="datetime">number</Type>
			</Measurement>
		</Param>
		<Param id="2011" trending="true">
			<Name>InterfacesStateLogical</Name>
			<Description>Logical (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[When set to true, the interface is a logical interface
which does not have an associated physical port or
channel on the system.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>False</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>True</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="2012" trending="true">
			<Name>InterfacesStateInOctets</Name>
			<Description>In Octets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of octets received on the interface,
including framing characters.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Octets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2013" trending="true">
			<Name>InterfacesStateInPckts</Name>
			<Description>In Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of packets received on the interface,
including all unicast, multicast, broadcast and bad packets etc.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2014" trending="true">
			<Name>InterfacesStateInUnicastPckts</Name>
			<Description>In Unicast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of packets, delivered by this sub-layer to a
higher (sub-)layer, that were not addressed to a
multicast or broadcast address at this sub-layer.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2015" trending="true">
			<Name>InterfacesStateInBroadcastPckts</Name>
			<Description>In Broadcast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of packets, delivered by this sub-layer to a
higher (sub-)layer, that were addressed to a broadcast
address at this sub-layer.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2016" trending="true">
			<Name>InterfacesStateInMulticastPckts</Name>
			<Description>In Multicast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of packets, delivered by this sub-layer to a
higher (sub-)layer, that were addressed to a multicast
address at this sub-layer.  For a MAC-layer protocol,
this includes both Group and Functional addresses.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2017" trending="true">
			<Name>InterfacesStateInDiscards</Name>
			<Description>In Discards (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of inbound packets that were chosen to be
discarded even though no errors had been detected to
prevent their being deliverable to a higher-layer
protocol.  One possible reason for discarding such a
packet could be to free up buffer space.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2018" trending="true">
			<Name>InterfacesStateInErrors</Name>
			<Description>In Errors (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being
deliverable to a higher-layer protocol.  For character-
oriented or fixed-length interfaces, the number of
inbound transmission units that contained errors
preventing them from being deliverable to a higher-layer
protocol.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<!-- SuppressValidator 2.9.7 different units possible -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2019" trending="true">
			<Name>InterfacesStateInUnknownProtos</Name>
			<Description>In Unknown Protocols (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[For packet-oriented interfaces, the number of packets
received via the interface that were discarded because
of an unknown or unsupported protocol.  For
character-oriented or fixed-length interfaces that
support protocol multiplexing, the number of
transmission units received via the interface that were
discarded because of an unknown or unsupported protocol.
For any interface that does not support protocol
multiplexing, this counter is not present.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<!-- SuppressValidator 2.9.7 Different units possible. -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2020" trending="true">
			<Name>InterfacesStateInFcsErrors</Name>
			<Description>In FCS Errors (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Number of received packets which had errors in the
frame check sequence (FCS), i.e., framing errors.

Discontinuities in the value of this counter can occur
when the device is re-initialization as indicated by the
value of 'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2021" trending="true">
			<Name>InterfacesStateOutOctets</Name>
			<Description>Out Octets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of octets transmitted out of the
interface, including framing characters.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Octets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2022" trending="true">
			<Name>InterfacesStateOutPckts</Name>
			<Description>Out Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of packets transmitted out of the
interface, including all unicast, multicast, broadcast,
and bad packets etc.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2023" trending="true">
			<Name>InterfacesStateOutUnicastPckts</Name>
			<Description>Out Unicast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of packets, delivered by this sub-layer to a
higher (sub-)layer, that were not addressed to a
multicast or broadcast address at this sub-layer.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2024" trending="true">
			<Name>InterfacesStateOutBroadcastPckts</Name>
			<Description>Out Broadcast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
broadcast address at this sub-layer, including those
that were discarded or not sent.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2025" trending="true">
			<Name>InterfacesStateOutMulticastPckts</Name>
			<Description>Out Multicast Packets (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The total number of packets that higher-level protocols
requested be transmitted, and that were addressed to a
multicast address at this sub-layer, including those
that were discarded or not sent.  For a MAC-layer
protocol, this includes both Group and Functional
addresses.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2026" trending="true">
			<Name>InterfacesStateOutDiscards</Name>
			<Description>Out Discards (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[The number of outbound packets that were chosen to be
discarded even though no errors had been detected to
prevent their being transmitted.  One possible reason
for discarding such a packet could be to free up buffer
space.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Packets</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2027" trending="true">
			<Name>InterfacesStateOutErrors</Name>
			<Description>Out Errors (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors.
For character-oriented or fixed-length interfaces, the
number of outbound transmission units that could not be
transmitted because of errors.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'last-clear'.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>0</Normal>
				<WaH>1</WaH>
				<MiH>10</MiH>
				<MaH>100</MaH>
				<CH>1000</CH>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Errors</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2028" trending="true">
			<Name>InterfacesStateCarrierTransitions</Name>
			<Description>Carrier Transitions (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Number of times the interface state has transitioned
between up and down since the time the device restarted
or the last-clear time, whichever is most recent.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 No unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<!-- /SuppressValidator 2.9.7 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2029" trending="false">
			<Name>InterfacesStateLastClear</Name>
			<Description>Last Clear (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Timestamp of the last time the interface counters were
cleared.

The value is the timestamp in nanoseconds relative to
the Unix Epoch (Jan 1, 1970 00:00:00 UTC).]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Decimals>8</Decimals>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Decimals>8</Decimals>
			</Display>
			<Measurement>
				<Type options="datetime">number</Type>
			</Measurement>
		</Param>
		<Param id="2030" trending="false">
			<Name>InterfacesStateDisplayKey</Name>
			<Description>Display Key [IDX] (Interfaces State)</Description>
			<Information>
				<Subtext>Index</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="2031" trending="true">
			<Name>InterfacesStateInBitRate</Name>
			<Description>In Bit Rate (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Bit rate calculated on the In Octets counter.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>bps</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2032" trending="true">
			<Name>InterfacesStateOutBitRate</Name>
			<Description>Out Bit Rate (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Bit rate calculated on the Out Octets counter.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>bps</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2033" trending="true">
			<Name>InterfacesStateInErrorRate</Name>
			<Description>In Error Rate (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Error rate calculated on the In Octets counter.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Errors/s</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="2034" trending="true">
			<Name>InterfacesStateOutErrorRate</Name>
			<Description>Out Error Rate (Interfaces State)</Description>
			<Information>
				<Subtext>
					<![CDATA[Error rate calculated on the Out Octets counter.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Units>Errors/s</Units>
				<Range>
					<Low>0</Low>
				</Range>
			</Display>
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		
		<Param id="3000" trending="false">
			<Name>OpenflowDataPathId</Name>
			<Description>Data Path ID</Description>
			<Information>
				<Subtext>
					<![CDATA[The OpenFlow data path unique ID.
The lower 48-bits are for a MAC address, while the upper 16-bits are implementer-defined.]]>
				</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>string</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Alarm>
				<Monitored>false</Monitored>
			</Alarm>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>0</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3001" trending="true">
			<Name>OpenflowFailureMode</Name>
			<Description>Failure Mode</Description>
			<Information>
				<Subtext><![CDATA[OpenFlow agent failure mode.
				-Secure: Packets and messages destined to the controllers are dropped. Flow entries continue to expire according to their timeouts.
				-Standalone: Processes all packets using the OFPP_NORMAL reserved port. The switch acts as a legacy Ethernet switch or router.]]></Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
					<Exception id="2" value="-2">
						<Display state="enabled">Unresolvable</Display>
						<Value>-2</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>1</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Secure</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>Standalone</Display>
						<Value>2</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="3002" trending="true">
			<Name>OpenflowBackOffInterval</Name>
			<Description>Back off Interval</Description>
			<Information>
				<Subtext>The OpenFlow agent connection back off interval.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>2</Row>
					</Position>
				</Positions>
				<Range>
					<Low>0</Low>
					<High>86400</High>
				</Range>
			</Display>
			<Measurement>
				<Type options="time">number</Type>
			</Measurement>
		</Param>
		<Param id="3003" trending="true">
			<Name>OpenflowMaxBackOff</Name>
			<Description>Maximum Back Off</Description>
			<Information>
				<Subtext>The OpenFlow agent maximum back off time.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>3</Row>
					</Position>
				</Positions>
				<Range>
					<Low>0</Low>
					<High>86400</High>
				</Range>
			</Display>
			<Measurement>
				<Type options="time">number</Type>
			</Measurement>
		</Param>
		<Param id="3004" trending="true">
			<Name>OpenflowInactivityProbePeriod</Name>
			<Description>Inactivity Probe Period</Description>
			<Information>
				<Subtext>The OpenFlow agent inactivity probe period.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>other</RawType>
				<Type>double</Type>
				<LengthType>next param</LengthType>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>4</Row>
					</Position>
				</Positions>
				<Range>
					<Low>0</Low>
					<High>86400</High>
				</Range>
			</Display>
			<Measurement>
				<Type options="time">number</Type>
			</Measurement>
		</Param>
		
		<Param id="3100">
			<Name>OpenflowMainControllerConnections</Name>
			<Description>Openflow Main Controller Connections</Description>
			<Type>array</Type>
			<ArrayOptions index="0" options=";naming=/3110">
				<ColumnOption idx="0" pid="3101" type="retrieved" options=""/>
				<ColumnOption idx="1" pid="3102" type="retrieved" options=""/>
				<ColumnOption idx="2" pid="3103" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="3" pid="3104" type="retrieved" options=""/>
				<ColumnOption idx="4" pid="3105" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="5" pid="3106" type="retrieved" options=""/>
				<ColumnOption idx="6" pid="3107" type="retrieved" options=""/>
				<ColumnOption idx="7" pid="3108" type="retrieved" options=""/>
				<ColumnOption idx="8" pid="3109" type="retrieved" options=""/>
				<ColumnOption idx="9" pid="3110" type="retrieved" options=""/>
			</ArrayOptions>
			<Information>
				<Subtext>Enters with DataMapper. Contains the list of connections to the Openflow main controller. The Openflow switch always connects to configured Openflow controllers. Each controller can have more than one connection, called auxiliary Openflow connections.</Subtext>
			</Information>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>6</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="tab=columns:3101|0-3110|9-3102|1-3103|2-3104|3-3105|4-3106|5-3107|6-3108|7-3109|8,width:0-150-100-100-100-100-125-100-115-100,sort:STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING,lines:25,filter:true">table</Type>
			</Measurement>
		</Param>
		<Param id="3101" trending="false">
			<Name>OpenflowMainControllerConnectionsPrimaryKey</Name>
			<Description>Primary Key (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext>This is the key used internally by DataMiner to identify the table entries.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3102" trending="false">
			<Name>OpenflowMainControllerConnectionsAuxiliaryId</Name>
			<Description>Auxiliary ID (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller auxiliary ID. Must be 0 for the main controller.
				One controller may have multiple auxiliary connections as specified by the Openflow protocol.
				Besides configuring the main controller, it is also possible to configure auxiliary connections.
				The main controller must have the auxiliary id set to zero. All others must have an auxiliary id different from zero.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3103" trending="true">
			<Name>OpenflowMainControllerConnectionsPriority</Name>
			<Description>Priority (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optional value for servicing auxiliary connections with different priorities.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
					<High>256</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3104" trending="false">
			<Name>OpenflowMainControllerConnectionsIpAddress</Name>
			<Description>IP Address (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[The IP address of the controller.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3105" trending="true">
			<Name>OpenflowMainControllerConnectionsPort</Name>
			<Description>Port (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller port to use.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>1</Low>
					<High>65535</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3106" trending="true">
			<Name>OpenflowMainControllerConnectionsTransportProtocol</Name>
			<Description>Transport Protocol (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller transport protocol used:
					TCP (Transmission Control Protocol)
					TLS (Transport Layer Security)
					Unresolvable: Enumerable value cannot be resolved to a valid transport value.
					N/A: value is not present.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
					<Exception id="2" value="-2">
						<Display state="enabled">Unresolvable</Display>
						<Value>-2</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>2</Normal>
				<WaH>1</WaH>
			</Alarm>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>TCP</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>TLS</Display>
						<Value>2</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="3107" trending="false">
			<Name>OpenflowMainControllerConnectionsCertificateId</Name>
			<Description>Certificate ID (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Certificate ID is used for TLS connections.
				When installed, cerficates are associated with an ID.
				This ID specifies the certificate to use in a TLS connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3108" trending="false">
			<Name>OpenflowMainControllerConnectionsSourceInterface</Name>
			<Description>Source Interface (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optionally specify the source interface for the controller connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3109" trending="true">
			<Name>OpenflowMainControllerConnectionsState</Name>
			<Description>State (Openflow Main Controller Connections)</Description>
			<Information>
				<Subtext>When connected, indicates the connection between the switch and controller is established.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Disconnected</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Connected</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
		</Param>
		<Param id="3110" trending="false">
			<Name>OpenflowMainControllerConnectionsDisplayKey</Name>
			<Description>Display Key (Openflow Main Controller Connections)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Display key.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3200">
			<Name>OpenflowSecondControllerConnectionsPolled</Name>
			<Description>Openflow Second Controller Connections Polled</Description>
			<Type>array</Type>
			<ArrayOptions index="0" options=";naming=/3210">
				<ColumnOption idx="0" pid="3201" type="retrieved" options=""/>
				<ColumnOption idx="1" pid="3202" type="retrieved" options=""/>
				<ColumnOption idx="2" pid="3203" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="3" pid="3204" type="retrieved" options=""/>
				<ColumnOption idx="4" pid="3205" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="5" pid="3206" type="retrieved" options=""/>
				<ColumnOption idx="6" pid="3207" type="retrieved" options=""/>
				<ColumnOption idx="7" pid="3208" type="retrieved" options=""/>
				<ColumnOption idx="8" pid="3209" type="retrieved" options=""/>
				<ColumnOption idx="9" pid="3210" type="retrieved" options=""/>
			</ArrayOptions>
			<Information>
				<Subtext>Enters with manual parsing through polling. Contains the list of connections to the Openflow second controller. The Openflow switch always connects to configured Openflow controllers. Each controller can have more than one connection, called auxiliary Openflow connections.</Subtext>
			</Information>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>7</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="tab=columns:3201|0-3210|9-3202|1-3203|2-3204|3-3205|4-3206|5-3207|6-3208|7-3209|8,width:0-150-100-100-100-100-125-100-115-100,sort:STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING,lines:25,filter:true">table</Type>
			</Measurement>
		</Param>
		<Param id="3201" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledPrimaryKey</Name>
			<Description>Primary Key (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext>This is the key used internally by DataMiner to identify the table entries.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3202" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledAuxiliaryId</Name>
			<Description>Auxiliary ID (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller auxiliary ID. Must be 0 for the main controller.
				One controller may have multiple auxiliary connections as specified by the Openflow protocol.
				Besides configuring the main controller, it is also possible to configure auxiliary connections.
				The main controller must have the auxiliary id set to zero. All others must have an auxiliary id different from zero.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3203" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledPriority</Name>
			<Description>Priority (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optional value for servicing auxiliary connections with different priorities.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
					<High>256</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3204" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledIpAddress</Name>
			<Description>IP Address (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[The IP address of the controller.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3205" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledPort</Name>
			<Description>Port (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller port to use.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>1</Low>
					<High>65535</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3206" trending="true">
			<Name>OpenflowSecondControllerConnectionsPolledTransportProtocol</Name>
			<Description>Transport Protocol (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller transport protocol used:
					TCP (Transmission Control Protocol)
					TLS (Transport Layer Security)
					Unresolvable: Enumerable value cannot be resolved to a valid discreet value.
					N/A: value is not present.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
					<Exception id="2" value="-2">
						<Display state="enabled">Unresolvable</Display>
						<Value>-2</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>2</Normal>
				<WaH>1</WaH>
			</Alarm>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>TCP</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>TLS</Display>
						<Value>2</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="3207" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledCertificateId</Name>
			<Description>Certificate ID (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Certificate ID is used for TLS connections.
				When installed, cerficates are associated with an ID.
				This ID specifies the certificate to use in a TLS connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3208" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledSourceInterface</Name>
			<Description>Source Interface (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optionally specify the source interface for the controller connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3209" trending="true">
			<Name>OpenflowSecondControllerConnectionsPolledState</Name>
			<Description>State (Openflow Second Controller Connections Polled)</Description>
			<Information>
				<Subtext>When connected, indicates the connection between the switch and controller is established.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Disconnected</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Connected</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
		</Param>
		<Param id="3210" trending="false">
			<Name>OpenflowSecondControllerConnectionsPolledDisplayKey</Name>
			<Description>Display Key (Openflow Second Controller Connections Polled)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Display key.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3300">
			<Name>OpenflowSecondControllerConnectionsSubscribed</Name>
			<Description>Openflow Second Controller Connections Subscribed</Description>
			<Type>array</Type>
			<ArrayOptions index="0" options=";naming=/3310">
				<ColumnOption idx="0" pid="3301" type="retrieved" options=""/>
				<ColumnOption idx="1" pid="3302" type="retrieved" options=""/>
				<ColumnOption idx="2" pid="3303" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="3" pid="3304" type="retrieved" options=""/>
				<ColumnOption idx="4" pid="3305" type="retrieved" options=";disableHeaderSum;disableHistogram;disableHeatmap"/>
				<ColumnOption idx="5" pid="3306" type="retrieved" options=""/>
				<ColumnOption idx="6" pid="3307" type="retrieved" options=""/>
				<ColumnOption idx="7" pid="3308" type="retrieved" options=""/>
				<ColumnOption idx="8" pid="3309" type="retrieved" options=""/>
				<ColumnOption idx="9" pid="3310" type="retrieved" options=""/>
			</ArrayOptions>
			<Information>
				<Subtext>Enters with manual parsing through subscription. Contains the list of connections to the Openflow second controller. The Openflow switch always connects to configured Openflow controllers. Each controller can have more than one connection, called auxiliary Openflow connections.</Subtext>
			</Information>
			<Display>
				<RTDisplay>true</RTDisplay>
				<Positions>
					<Position>
						<Page>Openflow</Page>
						<Column>0</Column>
						<Row>8</Row>
					</Position>
				</Positions>
			</Display>
			<Measurement>
				<Type options="tab=columns:3301|0-3310|9-3302|1-3303|2-3304|3-3305|4-3306|5-3307|6-3308|7-3309|8,width:0-150-100-100-100-100-125-100-115-100,sort:STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING-STRING,lines:25,filter:true">table</Type>
			</Measurement>
		</Param>
		<Param id="3301" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedPrimaryKey</Name>
			<Description>Primary Key (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext>This is the key used internally by DataMiner to identify the table entries.</Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3302" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedAuxiliaryId</Name>
			<Description>Auxiliary ID (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller auxiliary ID. Must be 0 for the main controller.
				One controller may have multiple auxiliary connections as specified by the Openflow protocol.
				Besides configuring the main controller, it is also possible to configure auxiliary connections.
				The main controller must have the auxiliary id set to zero. All others must have an auxiliary id different from zero.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3303" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedPriority</Name>
			<Description>Priority (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optional value for servicing auxiliary connections with different priorities.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>0</Low>
					<High>256</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3304" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedIpAddress</Name>
			<Description>IP Address (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[The IP address of the controller.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3305" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedPort</Name>
			<Description>Port (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller port to use.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<!-- SuppressValidator 2.9.7 no unit -->
			<Display>
				<RTDisplay>true</RTDisplay>
				<Range>
					<Low>1</Low>
					<High>65535</High>
				</Range>
			</Display>
			<!-- /SuppressValidator 2.9.7 -->
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
			<Measurement>
				<Type>number</Type>
			</Measurement>
		</Param>
		<Param id="3306" trending="true">
			<Name>OpenflowSecondControllerConnectionsSubscribedTransportProtocol</Name>
			<Description>Transport Protocol (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Controller transport protocol used:
					TCP (Transmission Control Protocol)
					TLS (Transport Layer Security)
					Unresolvable: Enumerable value cannot be resolved to a valid discreet value.
					N/A: value is not present.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
					<Exception id="2" value="-2">
						<Display state="enabled">Unresolvable</Display>
						<Value>-2</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Alarm>
				<Monitored>true</Monitored>
				<Normal>2</Normal>
				<WaH>1</WaH>
			</Alarm>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>TCP</Display>
						<Value>1</Value>
					</Discreet>
					<Discreet>
						<Display>TLS</Display>
						<Value>2</Value>
					</Discreet>
				</Discreets>
			</Measurement>
		</Param>
		<Param id="3307" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedCertificateId</Name>
			<Description>Certificate ID (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Certificate ID is used for TLS connections.
				When installed, cerficates are associated with an ID.
				This ID specifies the certificate to use in a TLS connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3308" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedSourceInterface</Name>
			<Description>Source Interface (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Optionally specify the source interface for the controller connection.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
		<Param id="3309" trending="true">
			<Name>OpenflowSecondControllerConnectionsSubscribedState</Name>
			<Description>State (Openflow Second Controller Connections Subscribed)</Description>
			<Information>
				<Subtext>When connected, indicates the connection between the switch and controller is established.</Subtext>
			</Information>
			<Type>read</Type>
			<Interprete>
				<RawType>numeric text</RawType>
				<LengthType>next param</LengthType>
				<Type>double</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>discreet</Type>
				<Discreets>
					<Discreet>
						<Display>Disconnected</Display>
						<Value>0</Value>
					</Discreet>
					<Discreet>
						<Display>Connected</Display>
						<Value>1</Value>
					</Discreet>
				</Discreets>
			</Measurement>
			<!-- SuppressValidator 2.5.1 User specific -->
			<Alarm>
				<Monitored>true</Monitored>
			</Alarm>
			<!-- /SuppressValidator 2.5.1 -->
		</Param>
		<Param id="3310" trending="false">
			<Name>OpenflowSecondControllerConnectionsSubscribedDisplayKey</Name>
			<Description>Display Key (Openflow Second Controller Connections Subscribed)</Description>
			<Type>read</Type>
			<Information>
				<Subtext><![CDATA[Display key.]]></Subtext>
			</Information>
			<Interprete>
				<RawType>other</RawType>
				<LengthType>next param</LengthType>
				<Type>string</Type>
				<Exceptions>
					<Exception id="1" value="-1">
						<Display state="disabled">N/A</Display>
						<Value>-1</Value>
					</Exception>
				</Exceptions>
			</Interprete>
			<Display>
				<RTDisplay>true</RTDisplay>
			</Display>
			<Measurement>
				<Type>string</Type>
			</Measurement>
		</Param>
	</Params>

	<QActions>
		<!-- SuppressValidator 3.14.1 Because it works as of 10.2.9 [RN33965] -->
		<QAction id="399" name="OpenConfigCommunication" encoding="csharp" triggers="2;3;409;411" options="queued">
		</QAction>
		<!-- /SuppressValidator 3.14.1 -->
	</QActions>

	<Groups>
		<Group id="2">
			<Name>After Startup</Name>
			<Description>After Startup</Description>
			<Type>poll action</Type>
			<Content>
				<Action>2</Action>
			</Content>
		</Group>
		<Group id="3">
			<Name>Poll Unsubscribed Data</Name>
			<Description>Poll Unsubscribed Data</Description>
			<Type>poll action</Type>
			<Content>
				<Action>3</Action>
			</Content>
		</Group>
	</Groups>

	<Triggers>
		<Trigger id="1">
			<Name>After Startup</Name>
			<On>protocol</On>
			<Time>after startup</Time>
			<Type>action</Type>
			<Content>
				<Id>1</Id>
			</Content>
		</Trigger>
	</Triggers>

	<Actions>
		<Action id="1">
			<Name>After Startup Group</Name>
			<On id="2">group</On>
			<Type>execute next</Type>
		</Action>
		<Action id="2">
			<Name>After Startup QAction</Name>
			<On id="2">parameter</On>
			<Type>run actions</Type>
		</Action>
		<Action id="3">
			<Name>Poll Unsubscribed Data</Name>
			<On id="3">parameter</On>
			<Type>run actions</Type>
		</Action>
	</Actions>

	<Timers>
		<Timer id="1">
			<Name>Poll Timer (10s)</Name>
			<Time initial="true">10000</Time>
			<Interval>75</Interval>
			<Content>
				<Group>3</Group>
			</Content>
		</Timer>
		<Timer id="2">
			<Name>PingQActionInstance (10m)</Name>
			<Time initial="true">600000</Time>
			<Interval>75</Interval>
			<Content>
				<Group>2</Group>
			</Content>
		</Timer>
	</Timers>

	<VersionHistory>
		<Branches>
			<Branch id="1">
				<Comment>Main Branch</Comment>
				<SystemVersions>
					<SystemVersion id="0">
						<MajorVersions>
							<MajorVersion id="0">
								<MinorVersions>
									<MinorVersion id="1">
										<Date>2023-04-03</Date>
										<Provider>
											<Author>LMO</Author>
											<Company>Skyline Communications</Company>
										</Provider>
										<Changes>
											<NewFeature>Initial version</NewFeature>
										</Changes>
										<References>
											<TaskId>202474</TaskId>
										</References>
									</MinorVersion>
									<MinorVersion id="2">
										<Date>2023-11-14</Date>
										<Provider>
											<Author>LMO</Author>
											<Company>Skyline Communications</Company>
										</Provider>
										<Changes>
											<Change>Uses OpenConfig Library version 2.0.0</Change>
											<Change>Removed model prefix from DataMinerDataGridColumns path</Change>
											<Change>Removed aux-id suffix from Openflow Main Controller Connections DataMinerDataGrid path</Change>
										</Changes>
										<References>
											<TaskId>224976</TaskId>
										</References>
									</MinorVersion>
									<MinorVersion id="3" basedOn="1.0.0.2">
										<Date>2024-01-04</Date>
										<Provider>
											<Author>FCO</Author>
											<Company>Skyline Communications</Company>
										</Provider>
										<Changes>
											<Change>Upgrade Skyline.DataMiner.DataSources.OpenConfig.Gnmi.Protocol to version 3.0.0 to make use of the generated middleware.</Change>
										</Changes>
										<References>
											<TaskId>227323</TaskId>
										</References>
									</MinorVersion>
								</MinorVersions>
							</MajorVersion>
						</MajorVersions>
					</SystemVersion>
				</SystemVersions>
			</Branch>
		</Branches>
	</VersionHistory>
</Protocol>