HomeAssistance-NooLite

NooLite platform for Home Assistance

Note: Currently supported only MTRF adapters.

Note: version 0.1.+ supported only in HA 8.16.0 and above. It is related to changing of the custom component architecture.

Note: version 0.2.+ supported only in HA 2022.2.2 and above.

Note: version 0.3.+ supported only in HA 2025.2.4 and above.

Installation

Copy custom_components folder from this repo into your Home Assistant config folder.

Platform configuration

Add next rows to Configuration.yaml:

noolite:
  port: "port_name"
  baudrate: baudrate_value

where port_name is your NooLite adapter port:

for Windows it is COM0, COM1, etc.
fot Linux it is /dev/ttyUSB0, /dev/ttyUSB1, etc.

and baudrate_value is port baudrate:

9600 (default value)
115200 (requires upgrade MTRF adapter firmware)

Modules configuration

Note: Modules should be already bind with your NooLite adapter. You can use official [nooLite One](https://noo.by/poddergka/skachat.html) application for that.

Binary sensor

Create file binary_sensors.yaml.

Add next line to Configuration.yaml:

binary_sensor: !include binary_sensors.yaml

For each binary sensor add configuration to binary_sensors.yaml:

- name: "sensor_name"
  platform: noolite
  channel: channel_number
  type: sensor_type

where

sensor_name - name of sensor, e.g. "hall_motion"
channel_number - channel number on which this sensor was binding
sensor_type - type of sensor:
- door
- garage_door
- moisture
- opening
- window
- light
- motion
- battery (in noolite remotes)
- remote (for noolite remotes, support on, off and switch events)

You can see example in file binary_sensors.yaml

Sensor

Create file sensors.yaml.

Add next line to Configuration.yaml:

sensor: !include sensors.yaml

For each sensor add configuration to sensors.yaml:

- name: "sensor_name"
  platform: noolite
  channel: channel_number
  type: sensor_type

where

sensor_name - name of sensor, e.g. "hall_temp"
channel_number - channel number on which this sensor was binding
sensor_type - type of sensor:
- temp - temperature sensor
- humi - humidity sensor
- analog - analog input value (for more details see https://noo.by/images/downloads/noolite-api_v1-0.pdf)
- remote - noolite remotes
- rgb_remote - noolite rgb remotes

You can see example in file sensors.yaml

Possible states for remote sensor type:

on
off
switch
tune_up
tune_down
tune_back
tune_stop
load_preset
save_preset

Possible states for rgb_remote sensor type:

switch
tune_back
tune_stop
roll_color
switch_mode
switch_color
switch_speed

Each of these states match to appropriate command received from remote. For more details see manual for remotes.

Note: Each state stay active around 200ms, after this it reset to unknown value. It is related to that noolite remotes send commands not states.

Light

Create file lights.yaml.

Add next line to Configuration.yaml:

light: !include lights.yaml

For each light add configuration to lights.yaml:

- name: "light_name"
  platform: noolite
  channel: channel_number
  type: light_type
  mode: module_mode
  scan_interval: scan_interval_value
  broadcast: broadcast_value

where

light_name - name of light, e.g. "hall_light"
channel_number - channel number on which this sensor was binding
light_type - type of module:
- light - for module without dimmer, e.g. SRF, SLF, etc. Default.
- dimmer - for module with dimmer, e.g SU, SUF, etc. However, if module supports dimmer, but configured as switch, please use light type.
- rgb_led - for rgb module
module_mode - module work mode:
- noolite - for noolite modules, e.g. SU.
- noolite-f - for noolite-f modules, e.g. SUF, SRF, SLF, etc. Default value.
scan_interval_value - interval of the module state requests, in seconds. Default value 60 seconds.
broadcast_value - mode of command sending (affects only noolite-f modules):
- true - send command to all modules in channel simultaneously.
- false - send command to all modules in channel in serial mode. Default value.

You can see example in lights.yaml

Switch

Create file switches.yaml.

Add next line to Configuration.yaml:

switch: !include switchs.yaml

For each switch add configuration to switches.yaml:

- name: "switch_name"
  platform: noolite
  channel: channel_number
  mode: module_mode
  scan_interval: scan_interval_value
  broadcast: broadcast_value

where

light_name - name of light, e.g. "hall_light"
channel_number - channel number on which this sensor was binding
module_mode - module work mode:
- noolite - for noolite modules, e.g. SU.
- noolite-f - for noolite-f modules, e.g. SUF, SRF, SLF, etc. Default value.
scan_interval_value - interval of the module state requests, in seconds. Default value 60 seconds.
broadcast_value - mode of command sending (affects only noolite-f modules):
- true - send command to all modules in channel simultaneously.
- false - send command to all modules in channel in serial mode. Default value.

You can see example in switches.yaml

Fan

Create file fans.yaml.

Add next line to Configuration.yaml:

fan: !include fans.yaml

For each fan add configuration to fans.yaml:

- name: "fan_name"
  platform: noolite
  channel: channel_number
  mode: module_mode
  speed_enabled: speed_enabled_value
  scan_interval: scan_interval_value
  broadcast: broadcast_value

where

fan_name - name of fan, e.g. "hall_fan"
channel_number - channel number on which this sensor was binding
module_mode - module work mode:
- noolite - for noolite modules, e.g. SU.
- noolite-f - for noolite-f modules, e.g. SUF, SRF, SLF, etc. Default value.
speed_enabled_value - allows speed management:
- true - speed management is enabled. Note: Works only for modules in dimmer mode.
- false - speed management is disabled. Default value.
scan_interval_value - interval of the module state requests, in seconds. Default value 60 seconds.
broadcast_value - mode of command sending (affects only noolite-f modules):
- true - send command to all modules in channel simultaneously.
- false - send command to all modules in channel in serial mode. Default value.

You can see example in fans.yaml

Services

Noolite integration extends default services for lights, fans and switch.

IMPORTANT using some services with modules in noolite mode, can cause incorrect states. It is related that we don known finish state after service call. For example, service noolite.light_load_preset restores saved state, but we don't know which this state is: on or off, which brightness was saved.

Lights

Allowing following services:

noolite.light_start_brightness_tune - start brightness changing in specific direction (only for dimmer type)
noolite.light_stop_brightness_tune - stop brightness changing (only for dimmer type)
noolite.light_load_preset - load and apply saved module tate (temporary only for dimmer type)
noolite.light_save_preset - save current module state (temporary available only for dimmer type)
noolite.rgb_start_brightness_tune - start brightness changing in specific direction (only available for rgb_led type)
noolite.rgb_stop_tune - stop brightness changing (only for rgb_led type)
noolite.rgb_start_roll_color - start color changing (only for rgb_led type)
noolite.rgb_switch_color - switch color to next (only for rgb_led type)
noolite.rgb_switch_mode - switch controller work mode: fixed color or change colors (only for rgb_led type)
noolite.rgb_start_switch_speed - start speed changing of color switching (only for rgb_led type)
noolite.rgb_load_preset - load and apply saved module tate (temporary available only for rgb_led type)
noolite.rgb_save_preset - save current module state (temporary available only for rgb_led type)

Switches

Allowing following services:

noolite.switch_load_preset - load and apply saved module tate
noolite.switch_save_preset - save current module state

Fans

Allowing following services:

noolite.fan_start_speed_tune - start speed changing in specific direction (only if fan uses noolite-f module and speed_enabled is set to true)
noolite.fan_stop_speed_tune - stop speed changing (only if fan uses noolite-f module and speed_enabled is set to true)
noolite.fan_load_preset - load and apply saved module tate (temporary available only if fan uses noolite-f module and speed_enabled is set to true)
noolite.fan_save_preset - save current module state (temporary available only if fan uses noolite-f module and speed_enabled is set to true)

Bind noolite remotes with services

Create file automations.yaml.

Add next line to Configuration.yaml:

automation: !include automations.yaml

After this you can create automations using HA interface. Open HA in browser, go to Configurations -> Automations and scenes. Also you can create automations manually. Please see parameters required for services in examples in automations.yaml.

Change log:

v0.2.2

added support of 2025.3

Breaking changes:

can be don't working with version oldest then 2025.2.4

v0.2.2

return switch event handling for binary sensors

v0.2.1

add possibility to set port baudrate

v0.2.0

reworking binary_sensors and sensors for noolite remotes
add rgb remote support
update sensors to subclass of SensorEntity
use attributes instead of override methods
add noolite service that allows use native module command

Breaking changes:

can be don't working with version oldest then 2022.2.2
rename remote sensor states, so old sensor config can be broken

v0.1.3

fix work with rgb_led module
refactor fan component
update ReadMe

v0.1.2

added manifest.json to match new HomeAssistant requirements
avoid of using deprecated Light, SwitchDevice and BinarySensorDevice

Breaking changes:

can be don't working with version oldest then 0.108.0

v0.1.1

switch to NooLite-F v0.1.2

v0.1.0

added binary sensors for: door, garage_door, moisture, opening, window, light, motion, battery (in noolite remotes)
added battery level information

Breaking changes: * platform and type names in config now is in lowercase * removed unused types * TempHumi sensor split to two separate sensors: temp and humi

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.rst

README.rst

HomeAssistance-NooLite

Installation

Platform configuration

Modules configuration

Binary sensor

Sensor

Light

Switch

Fan

Services

Lights

Switches

Fans

Bind noolite remotes with services

Change log:

v0.2.2

v0.2.2

v0.2.1

v0.2.0

v0.1.3

v0.1.2

v0.1.1

v0.1.0

Files

README.rst

Latest commit

History

README.rst

File metadata and controls

HomeAssistance-NooLite

Installation

Platform configuration

Modules configuration

Binary sensor

Sensor

Light

Switch

Fan

Services

Lights

Switches

Fans

Bind noolite remotes with services

Change log:

v0.2.2

v0.2.2

v0.2.1

v0.2.0

v0.1.3

v0.1.2

v0.1.1

v0.1.0