New pico sdk

CMakeLists.txt

@@ -1,3 +1,19 @@
+# == DO NOT EDIT THE FOLLOWING LINES for the Raspberry Pi Pico VS Code Extension to work ==
+if(WIN32)
+    set(USERHOME $ENV{USERPROFILE})
+else()
+    set(USERHOME $ENV{HOME})
+endif()
+set(sdkVersion 2.1.0)
+set(toolchainVersion 13_3_Rel1)
+set(picotoolVersion 2.1.0)
+set(picoVscode ${USERHOME}/.pico-sdk/cmake/pico-vscode.cmake)
+if (EXISTS ${picoVscode})
+    include(${picoVscode})
+endif()
+# ====================================================================================
+set(PICO_BOARD pimoroni_pico_plus2_rp2350 CACHE STRING "Board type")
+
 cmake_minimum_required(VERSION 3.13)
 include(CMakePrintHelpers)
 
@@ -39,7 +55,7 @@ set(CMAKE_CXX_STANDARD 17)
 if(DEFINED ENV{GP2040_BOARDCONFIG})
   set(GP2040_BOARDCONFIG $ENV{GP2040_BOARDCONFIG})
 elseif(NOT DEFINED GP2040_BOARDCONFIG)
-  set(GP2040_BOARDCONFIG Pico)
+  set(GP2040_BOARDCONFIG PicoPlus2)
 endif()
 
 if(DEFINED ENV{SKIP_SUBMODULES})

configs/Pico2/BoardConfig.h

@@ -0,0 +1,98 @@
+/*
+ * SPDX-License-Identifier: MIT
+ * SPDX-FileCopyrightText: Copyright (c) 2024 OpenStickCommunity (gp2040-ce.info)
+ */
+
+#ifndef PICO2_BOARD_CONFIG_H_
+#define PICO2_BOARD_CONFIG_H_
+
+#include "enums.pb.h"
+#include "class/hid/hid.h"
+
+#define BOARD_CONFIG_LABEL "Pico2"
+
+// Main pin mapping Configuration
+//                                                  // GP2040 | Xinput | Switch  | PS3/4/5  | Dinput | Arcade |
+#define GPIO_PIN_02 GpioAction::BUTTON_PRESS_UP     // UP     | UP     | UP      | UP       | UP     | UP     |
+#define GPIO_PIN_03 GpioAction::BUTTON_PRESS_DOWN   // DOWN   | DOWN   | DOWN    | DOWN     | DOWN   | DOWN   |
+#define GPIO_PIN_04 GpioAction::BUTTON_PRESS_RIGHT  // RIGHT  | RIGHT  | RIGHT   | RIGHT    | RIGHT  | RIGHT  |
+#define GPIO_PIN_05 GpioAction::BUTTON_PRESS_LEFT   // LEFT   | LEFT   | LEFT    | LEFT     | LEFT   | LEFT   |
+#define GPIO_PIN_06 GpioAction::BUTTON_PRESS_B1     // B1     | A      | B       | Cross    | 2      | K1     |
+#define GPIO_PIN_07 GpioAction::BUTTON_PRESS_B2     // B2     | B      | A       | Circle   | 3      | K2     |
+#define GPIO_PIN_08 GpioAction::BUTTON_PRESS_R2     // R2     | RT     | ZR      | R2       | 8      | K3     |
+#define GPIO_PIN_09 GpioAction::BUTTON_PRESS_L2     // L2     | LT     | ZL      | L2       | 7      | K4     |
+#define GPIO_PIN_10 GpioAction::BUTTON_PRESS_B3     // B3     | X      | Y       | Square   | 1      | P1     |
+#define GPIO_PIN_11 GpioAction::BUTTON_PRESS_B4     // B4     | Y      | X       | Triangle | 4      | P2     |
+#define GPIO_PIN_12 GpioAction::BUTTON_PRESS_R1     // R1     | RB     | R       | R1       | 6      | P3     |
+#define GPIO_PIN_13 GpioAction::BUTTON_PRESS_L1     // L1     | LB     | L       | L1       | 5      | P4     |
+#define GPIO_PIN_16 GpioAction::BUTTON_PRESS_S1     // S1     | Back   | Minus   | Select   | 9      | Coin   |
+#define GPIO_PIN_17 GpioAction::BUTTON_PRESS_S2     // S2     | Start  | Plus    | Start    | 10     | Start  |
+#define GPIO_PIN_18 GpioAction::BUTTON_PRESS_L3     // L3     | LS     | LS      | L3       | 11     | LS     |
+#define GPIO_PIN_19 GpioAction::BUTTON_PRESS_R3     // R3     | RS     | RS      | R3       | 12     | RS     |
+#define GPIO_PIN_20 GpioAction::BUTTON_PRESS_A1     // A1     | Guide  | Home    | PS       | 13     | ~      |
+#define GPIO_PIN_21 GpioAction::BUTTON_PRESS_A2     // A2     | ~      | Capture | ~        | 14     | ~      |
+
+// Setting GPIO pins to assigned by add-on
+//
+#define GPIO_PIN_00 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_01 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_15 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_28 GpioAction::ASSIGNED_TO_ADDON
+
+// Keyboard Mapping Configuration
+//                                            // GP2040 | Xinput | Switch  | PS3/4/5  | Dinput | Arcade |
+#define KEY_DPAD_UP     HID_KEY_ARROW_UP      // UP     | UP     | UP      | UP       | UP     | UP     |
+#define KEY_DPAD_DOWN   HID_KEY_ARROW_DOWN    // DOWN   | DOWN   | DOWN    | DOWN     | DOWN   | DOWN   |
+#define KEY_DPAD_RIGHT  HID_KEY_ARROW_RIGHT   // RIGHT  | RIGHT  | RIGHT   | RIGHT    | RIGHT  | RIGHT  |
+#define KEY_DPAD_LEFT   HID_KEY_ARROW_LEFT    // LEFT   | LEFT   | LEFT    | LEFT     | LEFT   | LEFT   |
+#define KEY_BUTTON_B1   HID_KEY_SHIFT_LEFT    // B1     | A      | B       | Cross    | 2      | K1     |
+#define KEY_BUTTON_B2   HID_KEY_Z             // B2     | B      | A       | Circle   | 3      | K2     |
+#define KEY_BUTTON_R2   HID_KEY_X             // R2     | RT     | ZR      | R2       | 8      | K3     |
+#define KEY_BUTTON_L2   HID_KEY_V             // L2     | LT     | ZL      | L2       | 7      | K4     |
+#define KEY_BUTTON_B3   HID_KEY_CONTROL_LEFT  // B3     | X      | Y       | Square   | 1      | P1     |
+#define KEY_BUTTON_B4   HID_KEY_ALT_LEFT      // B4     | Y      | X       | Triangle | 4      | P2     |
+#define KEY_BUTTON_R1   HID_KEY_SPACE         // R1     | RB     | R       | R1       | 6      | P3     |
+#define KEY_BUTTON_L1   HID_KEY_C             // L1     | LB     | L       | L1       | 5      | P4     |
+#define KEY_BUTTON_S1   HID_KEY_5             // S1     | Back   | Minus   | Select   | 9      | Coin   |
+#define KEY_BUTTON_S2   HID_KEY_1             // S2     | Start  | Plus    | Start    | 10     | Start  |
+#define KEY_BUTTON_L3   HID_KEY_EQUAL         // L3     | LS     | LS      | L3       | 11     | LS     |
+#define KEY_BUTTON_R3   HID_KEY_MINUS         // R3     | RS     | RS      | R3       | 12     | RS     |
+#define KEY_BUTTON_A1   HID_KEY_9             // A1     | Guide  | Home    | PS       | 13     | ~      |
+#define KEY_BUTTON_A2   HID_KEY_F2            // A2     | ~      | Capture | ~        | 14     | ~      |
+#define KEY_BUTTON_FN   -1                    // Hotkey Function                                        |
+
+#define TURBO_ENABLED 1
+#define GPIO_PIN_14 GpioAction::BUTTON_PRESS_TURBO
+#define TURBO_LED_PIN 15
+
+#define BOARD_LEDS_PIN 28
+#define LED_BRIGHTNESS_MAXIMUM 100
+#define LED_BRIGHTNESS_STEPS 5
+#define LED_FORMAT LED_FORMAT_GRB
+#define LEDS_PER_PIXEL 1
+
+#define LEDS_DPAD_LEFT   0
+#define LEDS_DPAD_DOWN   1
+#define LEDS_DPAD_RIGHT  2
+#define LEDS_DPAD_UP     3
+#define LEDS_BUTTON_B3   4
+#define LEDS_BUTTON_B4   5
+#define LEDS_BUTTON_R1   6
+#define LEDS_BUTTON_L1   7
+#define LEDS_BUTTON_B1   8
+#define LEDS_BUTTON_B2   9
+#define LEDS_BUTTON_R2   10
+#define LEDS_BUTTON_L2   11
+#define LEDS_BUTTON_A1   12
+#define LEDS_BUTTON_L3   13
+#define LEDS_BUTTON_R3   14
+#define LEDS_BUTTON_A2   15
+
+#define HAS_I2C_DISPLAY 1
+#define I2C0_ENABLED 1
+#define I2C0_PIN_SDA 0
+#define I2C0_PIN_SCL 1
+#define BUTTON_LAYOUT BUTTON_LAYOUT_STICKLESS
+#define BUTTON_LAYOUT_RIGHT BUTTON_LAYOUT_STICKLESSB
+
+#endif

configs/Pico2/CMakeLists.txt

@@ -0,0 +1,3 @@
+#add_executable(Pico
+#${CMAKE_SOURCE_DIR}/src/main.cpp)
+#link_libraries(${PROJECT_NAME})

configs/Pico2/README.md

@@ -0,0 +1,28 @@
+# GP2040 Configuration for Raspberry Pi Pico
+
+![Pin Mapping](assets/PinMapping.png)
+
+Basic pin setup for a stock Raspberry Pi Pico. Combine with a simple GPIO breakout/screw terminal board for an easy DIY arcade stick.
+
+## Main Pin Mapping Configuration
+
+| RP2040 Pin | Action                        | GP2040 | Xinput | Switch | PS3/4/5  | Dinput | Arcade |
+|------------|-------------------------------|--------|--------|--------|----------|--------|--------|
+| GPIO_PIN_02| GpioAction::BUTTON_PRESS_UP   | UP     | UP     | UP     | UP       | UP     | UP     |
+| GPIO_PIN_03| GpioAction::BUTTON_PRESS_DOWN | DOWN   | DOWN   | DOWN   | DOWN     | DOWN   | DOWN   |
+| GPIO_PIN_04| GpioAction::BUTTON_PRESS_RIGHT| RIGHT  | RIGHT  | RIGHT  | RIGHT    | RIGHT  | RIGHT  |
+| GPIO_PIN_05| GpioAction::BUTTON_PRESS_LEFT | LEFT   | LEFT   | LEFT   | LEFT     | LEFT   | LEFT   |
+| GPIO_PIN_06| GpioAction::BUTTON_PRESS_B1   | B1     | A      | B      | Cross    | 2      | K1     |
+| GPIO_PIN_07| GpioAction::BUTTON_PRESS_B2   | B2     | B      | A      | Circle   | 3      | K2     |
+| GPIO_PIN_08| GpioAction::BUTTON_PRESS_R2   | R2     | RT     | ZR     | R2       | 8      | K3     |
+| GPIO_PIN_09| GpioAction::BUTTON_PRESS_L2   | L2     | LT     | ZL     | L2       | 7      | K4     |
+| GPIO_PIN_10| GpioAction::BUTTON_PRESS_B3   | B3     | X      | Y      | Square   | 1      | P1     |
+| GPIO_PIN_11| GpioAction::BUTTON_PRESS_B4   | B4     | Y      | X      | Triangle | 4      | P2     |
+| GPIO_PIN_12| GpioAction::BUTTON_PRESS_R1   | R1     | RB     | R      | R1       | 6      | P3     |
+| GPIO_PIN_13| GpioAction::BUTTON_PRESS_L1   | L1     | LB     | L      | L1       | 5      | P4     |
+| GPIO_PIN_16| GpioAction::BUTTON_PRESS_S1   | S1     | Back   | Minus  | Select   | 9      | Coin   |
+| GPIO_PIN_17| GpioAction::BUTTON_PRESS_S2   | S2     | Start  | Plus   | Start    | 10     | Start  |
+| GPIO_PIN_18| GpioAction::BUTTON_PRESS_L3   | L3     | LS     | LS     | L3       | 11     | LS     |
+| GPIO_PIN_19| GpioAction::BUTTON_PRESS_R3   | R3     | RS     | RS     | R3       | 12     | RS     |
+| GPIO_PIN_20| GpioAction::BUTTON_PRESS_A1   | A1     | Guide  | Home   | PS       | 13     | ~      |
+| GPIO_PIN_21| GpioAction::BUTTON_PRESS_A2   | A2     | ~      | Capture| ~        | 14     | ~      |

configs/PicoPlus2/BoardConfig.h

@@ -0,0 +1,140 @@
+/*
+ * SPDX-License-Identifier: MIT
+ * SPDX-FileCopyrightText: Copyright (c) 2024 OpenStickCommunity (gp2040-ce.info)
+ */
+
+// pico_cmake_set PICO_PLATFORM=rp2350
+// pico_cmake_set PICO_CYW43_SUPPORTED = 1
+
+#ifndef PICOPLUS2_BOARD_CONFIG_H_
+#define PICOPLUS2_BOARD_CONFIG_H_
+
+#include "enums.pb.h"
+#include "class/hid/hid.h"
+
+#define BOARD_CONFIG_LABEL "PicoPlus2"
+
+#ifndef PICO_FLASH_SIZE_BYTES
+#define PICO_FLASH_SIZE_BYTES (16 * 1024 * 1024)
+#endif
+#ifndef PICO_RP2350_A2_SUPPORTED
+#define PICO_RP2350_A2_SUPPORTED 1
+#endif
+// gpio pin to power up the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_REG_ON
+#define CYW43_DEFAULT_PIN_WL_REG_ON 32
+#endif
+
+// gpio pin for spi data out to the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_DATA_OUT
+#define CYW43_DEFAULT_PIN_WL_DATA_OUT 35
+#endif
+
+// gpio pin for spi data in from the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_DATA_IN
+#define CYW43_DEFAULT_PIN_WL_DATA_IN 35
+#endif
+
+// gpio (irq) pin for the irq line from the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_HOST_WAKE
+#define CYW43_DEFAULT_PIN_WL_HOST_WAKE 35
+#endif
+
+// gpio pin for the spi clock line to the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_CLOCK
+#define CYW43_DEFAULT_PIN_WL_CLOCK 34
+#endif
+
+// gpio pin for the spi chip select to the cyw43 chip
+#ifndef CYW43_DEFAULT_PIN_WL_CS
+#define CYW43_DEFAULT_PIN_WL_CS 33
+#endif
+
+#ifndef CYW43_WL_GPIO_COUNT
+#define CYW43_WL_GPIO_COUNT 3
+#endif
+// Main pin mapping Configuration
+//                                                  // GP2040 | Xinput | Switch  | PS3/4/5  | Dinput | Arcade |
+#define GPIO_PIN_02 GpioAction::BUTTON_PRESS_UP     // UP     | UP     | UP      | UP       | UP     | UP     |
+#define GPIO_PIN_03 GpioAction::BUTTON_PRESS_DOWN   // DOWN   | DOWN   | DOWN    | DOWN     | DOWN   | DOWN   |
+#define GPIO_PIN_04 GpioAction::BUTTON_PRESS_RIGHT  // RIGHT  | RIGHT  | RIGHT   | RIGHT    | RIGHT  | RIGHT  |
+#define GPIO_PIN_05 GpioAction::BUTTON_PRESS_LEFT   // LEFT   | LEFT   | LEFT    | LEFT     | LEFT   | LEFT   |
+#define GPIO_PIN_06 GpioAction::BUTTON_PRESS_B1     // B1     | A      | B       | Cross    | 2      | K1     |
+#define GPIO_PIN_07 GpioAction::BUTTON_PRESS_B2     // B2     | B      | A       | Circle   | 3      | K2     |
+#define GPIO_PIN_08 GpioAction::BUTTON_PRESS_R2     // R2     | RT     | ZR      | R2       | 8      | K3     |
+#define GPIO_PIN_09 GpioAction::BUTTON_PRESS_L2     // L2     | LT     | ZL      | L2       | 7      | K4     |
+#define GPIO_PIN_10 GpioAction::BUTTON_PRESS_B3     // B3     | X      | Y       | Square   | 1      | P1     |
+#define GPIO_PIN_11 GpioAction::BUTTON_PRESS_B4     // B4     | Y      | X       | Triangle | 4      | P2     |
+#define GPIO_PIN_12 GpioAction::BUTTON_PRESS_R1     // R1     | RB     | R       | R1       | 6      | P3     |
+#define GPIO_PIN_13 GpioAction::BUTTON_PRESS_L1     // L1     | LB     | L       | L1       | 5      | P4     |
+#define GPIO_PIN_16 GpioAction::BUTTON_PRESS_S1     // S1     | Back   | Minus   | Select   | 9      | Coin   |
+#define GPIO_PIN_17 GpioAction::BUTTON_PRESS_S2     // S2     | Start  | Plus    | Start    | 10     | Start  |
+#define GPIO_PIN_18 GpioAction::BUTTON_PRESS_L3     // L3     | LS     | LS      | L3       | 11     | LS     |
+#define GPIO_PIN_19 GpioAction::BUTTON_PRESS_R3     // R3     | RS     | RS      | R3       | 12     | RS     |
+#define GPIO_PIN_20 GpioAction::BUTTON_PRESS_A1     // A1     | Guide  | Home    | PS       | 13     | ~      |
+#define GPIO_PIN_21 GpioAction::BUTTON_PRESS_A2     // A2     | ~      | Capture | ~        | 14     | ~      |
+
+// Setting GPIO pins to assigned by add-on
+//
+#define GPIO_PIN_00 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_01 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_15 GpioAction::ASSIGNED_TO_ADDON
+#define GPIO_PIN_28 GpioAction::ASSIGNED_TO_ADDON
+
+// Keyboard Mapping Configuration
+//                                            // GP2040 | Xinput | Switch  | PS3/4/5  | Dinput | Arcade |
+#define KEY_DPAD_UP     HID_KEY_ARROW_UP      // UP     | UP     | UP      | UP       | UP     | UP     |
+#define KEY_DPAD_DOWN   HID_KEY_ARROW_DOWN    // DOWN   | DOWN   | DOWN    | DOWN     | DOWN   | DOWN   |
+#define KEY_DPAD_RIGHT  HID_KEY_ARROW_RIGHT   // RIGHT  | RIGHT  | RIGHT   | RIGHT    | RIGHT  | RIGHT  |
+#define KEY_DPAD_LEFT   HID_KEY_ARROW_LEFT    // LEFT   | LEFT   | LEFT    | LEFT     | LEFT   | LEFT   |
+#define KEY_BUTTON_B1   HID_KEY_SHIFT_LEFT    // B1     | A      | B       | Cross    | 2      | K1     |
+#define KEY_BUTTON_B2   HID_KEY_Z             // B2     | B      | A       | Circle   | 3      | K2     |
+#define KEY_BUTTON_R2   HID_KEY_X             // R2     | RT     | ZR      | R2       | 8      | K3     |
+#define KEY_BUTTON_L2   HID_KEY_V             // L2     | LT     | ZL      | L2       | 7      | K4     |
+#define KEY_BUTTON_B3   HID_KEY_CONTROL_LEFT  // B3     | X      | Y       | Square   | 1      | P1     |
+#define KEY_BUTTON_B4   HID_KEY_ALT_LEFT      // B4     | Y      | X       | Triangle | 4      | P2     |
+#define KEY_BUTTON_R1   HID_KEY_SPACE         // R1     | RB     | R       | R1       | 6      | P3     |
+#define KEY_BUTTON_L1   HID_KEY_C             // L1     | LB     | L       | L1       | 5      | P4     |
+#define KEY_BUTTON_S1   HID_KEY_5             // S1     | Back   | Minus   | Select   | 9      | Coin   |
+#define KEY_BUTTON_S2   HID_KEY_1             // S2     | Start  | Plus    | Start    | 10     | Start  |
+#define KEY_BUTTON_L3   HID_KEY_EQUAL         // L3     | LS     | LS      | L3       | 11     | LS     |
+#define KEY_BUTTON_R3   HID_KEY_MINUS         // R3     | RS     | RS      | R3       | 12     | RS     |
+#define KEY_BUTTON_A1   HID_KEY_9             // A1     | Guide  | Home    | PS       | 13     | ~      |
+#define KEY_BUTTON_A2   HID_KEY_F2            // A2     | ~      | Capture | ~        | 14     | ~      |
+#define KEY_BUTTON_FN   -1                    // Hotkey Function                                        |
+
+#define TURBO_ENABLED 1
+#define GPIO_PIN_14 GpioAction::BUTTON_PRESS_TURBO
+#define TURBO_LED_PIN 15
+
+#define BOARD_LEDS_PIN 28
+#define LED_BRIGHTNESS_MAXIMUM 100
+#define LED_BRIGHTNESS_STEPS 5
+#define LED_FORMAT LED_FORMAT_GRB
+#define LEDS_PER_PIXEL 1
+
+#define LEDS_DPAD_LEFT   0
+#define LEDS_DPAD_DOWN   1
+#define LEDS_DPAD_RIGHT  2
+#define LEDS_DPAD_UP     3
+#define LEDS_BUTTON_B3   4
+#define LEDS_BUTTON_B4   5
+#define LEDS_BUTTON_R1   6
+#define LEDS_BUTTON_L1   7
+#define LEDS_BUTTON_B1   8
+#define LEDS_BUTTON_B2   9
+#define LEDS_BUTTON_R2   10
+#define LEDS_BUTTON_L2   11
+#define LEDS_BUTTON_A1   12
+#define LEDS_BUTTON_L3   13
+#define LEDS_BUTTON_R3   14
+#define LEDS_BUTTON_A2   15
+
+#define HAS_I2C_DISPLAY 1
+#define I2C0_ENABLED 1
+#define I2C0_PIN_SDA 0
+#define I2C0_PIN_SCL 1
+#define BUTTON_LAYOUT BUTTON_LAYOUT_STICKLESS
+#define BUTTON_LAYOUT_RIGHT BUTTON_LAYOUT_STICKLESSB
+
+#endif

configs/PicoPlus2/CMakeLists.txt

@@ -0,0 +1,3 @@
+#add_executable(Pico
+#${CMAKE_SOURCE_DIR}/src/main.cpp)
+#link_libraries(${PROJECT_NAME})

configs/PicoPlus2/README.md

@@ -0,0 +1,28 @@
+# GP2040 Configuration for Raspberry Pi Pico
+
+![Pin Mapping](assets/PinMapping.png)
+
+Basic pin setup for a stock Raspberry Pi Pico. Combine with a simple GPIO breakout/screw terminal board for an easy DIY arcade stick.
+
+## Main Pin Mapping Configuration
+
+| RP2040 Pin | Action                        | GP2040 | Xinput | Switch | PS3/4/5  | Dinput | Arcade |
+|------------|-------------------------------|--------|--------|--------|----------|--------|--------|
+| GPIO_PIN_02| GpioAction::BUTTON_PRESS_UP   | UP     | UP     | UP     | UP       | UP     | UP     |
+| GPIO_PIN_03| GpioAction::BUTTON_PRESS_DOWN | DOWN   | DOWN   | DOWN   | DOWN     | DOWN   | DOWN   |
+| GPIO_PIN_04| GpioAction::BUTTON_PRESS_RIGHT| RIGHT  | RIGHT  | RIGHT  | RIGHT    | RIGHT  | RIGHT  |
+| GPIO_PIN_05| GpioAction::BUTTON_PRESS_LEFT | LEFT   | LEFT   | LEFT   | LEFT     | LEFT   | LEFT   |
+| GPIO_PIN_06| GpioAction::BUTTON_PRESS_B1   | B1     | A      | B      | Cross    | 2      | K1     |
+| GPIO_PIN_07| GpioAction::BUTTON_PRESS_B2   | B2     | B      | A      | Circle   | 3      | K2     |
+| GPIO_PIN_08| GpioAction::BUTTON_PRESS_R2   | R2     | RT     | ZR     | R2       | 8      | K3     |
+| GPIO_PIN_09| GpioAction::BUTTON_PRESS_L2   | L2     | LT     | ZL     | L2       | 7      | K4     |
+| GPIO_PIN_10| GpioAction::BUTTON_PRESS_B3   | B3     | X      | Y      | Square   | 1      | P1     |
+| GPIO_PIN_11| GpioAction::BUTTON_PRESS_B4   | B4     | Y      | X      | Triangle | 4      | P2     |
+| GPIO_PIN_12| GpioAction::BUTTON_PRESS_R1   | R1     | RB     | R      | R1       | 6      | P3     |
+| GPIO_PIN_13| GpioAction::BUTTON_PRESS_L1   | L1     | LB     | L      | L1       | 5      | P4     |
+| GPIO_PIN_16| GpioAction::BUTTON_PRESS_S1   | S1     | Back   | Minus  | Select   | 9      | Coin   |
+| GPIO_PIN_17| GpioAction::BUTTON_PRESS_S2   | S2     | Start  | Plus   | Start    | 10     | Start  |
+| GPIO_PIN_18| GpioAction::BUTTON_PRESS_L3   | L3     | LS     | LS     | L3       | 11     | LS     |
+| GPIO_PIN_19| GpioAction::BUTTON_PRESS_R3   | R3     | RS     | RS     | R3       | 12     | RS     |
+| GPIO_PIN_20| GpioAction::BUTTON_PRESS_A1   | A1     | Guide  | Home   | PS       | 13     | ~      |
+| GPIO_PIN_21| GpioAction::BUTTON_PRESS_A2   | A2     | ~      | Capture| ~        | 14     | ~      |

lib/NeoPico/src/generated/ws2812.pio.h

@@ -14,6 +14,7 @@
 
 #define ws2812_wrap_target 0
 #define ws2812_wrap 3
+#define ws2812_pio_version 1
 
 #define ws2812_T1 2
 #define ws2812_T2 5
@@ -33,6 +34,10 @@ static const struct pio_program ws2812_program = {
     .instructions = ws2812_program_instructions,
     .length = 4,
     .origin = -1,
+    .pio_version = ws2812_pio_version,
+#if PICO_PIO_VERSION > 0
+    .used_gpio_ranges = 0x0
+#endif
 };
 
 static inline pio_sm_config ws2812_program_get_default_config(uint offset) {
@@ -65,6 +70,7 @@ static inline void ws2812_program_init(PIO pio, uint sm, uint offset, uint pin,
 
 #define ws2812_parallel_wrap_target 0
 #define ws2812_parallel_wrap 3
+#define ws2812_parallel_pio_version 1
 
 #define ws2812_parallel_T1 2
 #define ws2812_parallel_T2 5
@@ -84,6 +90,10 @@ static const struct pio_program ws2812_parallel_program = {
     .instructions = ws2812_parallel_program_instructions,
     .length = 4,
     .origin = -1,
+    .pio_version = ws2812_parallel_pio_version,
+#if PICO_PIO_VERSION > 0
+    .used_gpio_ranges = 0x0
+#endif
 };
 
 static inline pio_sm_config ws2812_parallel_program_get_default_config(uint offset) {

lib/WiiExtension/WiiExtension.h

@@ -90,7 +90,7 @@ typedef enum {
 #endif
 
 #define WII_ALARM_NUM 0
-#define WII_ALARM_IRQ TIMER_IRQ_0
+#define WII_ALARM_IRQ TIMER1_IRQ_0
 
 #define WII_CHECKSUM_MAGIC 0x55
 #define WII_CALIBRATION_SIZE 0x10