hw_inventory_wiki
Tools
| Item | Qnd |
|---|---|
| Chave Hexa 1.5mm/2mm/2.5mm/3mm/4mm/5mm/6mm/8mm/10mm | 9 |
| Chave Philips 4.5mm | 1 |
| Chave Philips 6mm | 1 |
| Chave Fenda 5.5mm | 1 |
| Alicate Corte | 1 |
| Alicate Pontas | 1 |
| Chave Inglesa 0/20mm | 1 |
| Chave de Boca 8/9mm | 1 |
3D Print Files
Front Laser Support
 |
 |
| front_laser_support_V1.2.SLDPRT | rear_laser_support_V1.01.SLDPRT |
| front_laser_support_V1.2.STL | rear_laser_support_V1.01.STL |
AP Support // *->Switch Support
 |
| AP_Support_TIAGo_V2.1.SLDPRT |
| AP_Support_TIAGo_V2.1.STL |
Powerbank Support // Modelo Antigo, não é possível dar upload ao novo ficheiro
 |
| Powerbank_Support_V1.3.SLDPRT |
| Powerbank_Support_V1.3.STL.zip |
NVidia Jetson NX
 |
 |
| JetsonXavier_Bottom.stl | JetsonXavier_Top.stl |
Extra Storage
 |
| RightStorageContainer_TIAGo.SLDPRT |
| RightStorageContainer_TIAGo_Left.SLDPRT RightStorageContainer_TIAGo_Left.STL |
| RightStorageContainer_TIAGo_Right.SLDPRT RightStorageContainer_TIAGo_Right.STL |
TIAGo Eyes // *-> New Head
 |
 |
 |
| TE_Base.SLDPRT TE_Base_W.STL | TE_P1.SLDPRT TE_P1_B.STL |
 |
 |
| TE_P2.SLDPRT TE_P2_W.STL | TE_P3.SLDPRT TE_P3_B.STL |
 |
 |
| TIAGo_CoverEXtra.SLDPRT TIAGo_CoverEXtra.STL | Arduino_Support.SLDPRT |
Microphone Supports
 |
 |
| ReSpeaker_BottomRemixByDmytro.STL ReSpeaker_Top._RemixByDmytroSTL.STL | RODE_Support_V2.SLDPRT RODE_Support_V2.STL |
Azure + Mic Support