Loss Of Telemetry Sensors #94
Comments
|
delete ALL sensors and re-discover. |
|
Hi,
Done that SEVERAL times not made a jot of difference with any of my
tried combinations
i.e. Two(2) different TD R10 Rx and using a X20S and a X20RS Tx
Also ...
I have three (3) sets of LiPo and Current sensors, ALL work perfectly
with other FrSky Rx.
…------ Original Message ------
From "noamkrief" ***@***.***>
To "FrSkyRC/ETHOS-Feedback-Community"
***@***.***>
Cc "CaptKremen" ***@***.***>; "Author"
***@***.***>
Date 04/01/2025 15:48:12
Subject Re: [FrSkyRC/ETHOS-Feedback-Community] Loss Of Telemetry Sensors
(Issue FrSkyRC/RF_Feedback_Group#94)
delete ALL sensors and re-discover.
—
Reply to this email directly, view it on GitHub
<#94>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AYZRCEBJFCSVRLKQTY6NWT32I77DZAVCNFSM6AAAAABUTFN4IKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNZRGMZTQNJWG4>.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
The same thing happens to me and they are already investigating it. Surely now this message is forwarded to the corresponding department.Mine is TDR18 |
|
I seem to remember having to re register and bind the rx before it would all work properly after an update to v3.0.1 .I seem to remember the rx light being on as if it was connected to the tx but no signal strengrh at the top of the screen until a re-register and bind restored everything...hope this info helps. |
|
Sadly, having done this, (several times just in-case), no re-registering
and binding didn't resolve the loss (never actually discovered in the
first place), of the 'LiPo' and 'Current' sensors 😪
…------ Original Message ------
From "ETHOSWarrier" ***@***.***>
To "FrSkyRC/ETHOS-Feedback-Community"
***@***.***>
Cc "CaptKremen" ***@***.***>; "Author"
***@***.***>
Date 05/01/2025 09:59:11
Subject Re: [FrSkyRC/ETHOS-Feedback-Community] Loss Of Telemetry Sensors
(Issue FrSkyRC/RF_Feedback_Group#94)
I seem to remember having to re register and bind the rx before it
would all work properly after an update to v3.0.1 .I seem to remember
the rx light being on as if it was connected to the tx but no signal
strengrh at the top of the screen until a re-register and bind restored
everything...hope this info helps.
—
Reply to this email directly, view it on GitHub
<#94>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AYZRCEAHBF2L4YRGWP3G5232JD667AVCNFSM6AAAAABUTFN4IKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNZRGU3DSNBYGI>.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
X20-Pro V3.0.1, Ethos 1.6.0, TD-SR18 V3.0.1, Lua V3.0.0. No issues. |
|
Excellent for you.
Me - X20S and X20RS V3.01, Ethos 1.6.0. Lua V3.0.0 BUT 2(Two) separate
TD SR10 and 3(three) different sets of LiPo and Current sensors tried
(all current firmware) - No LiPo or current 'discovered' 🤔
…------ Original Message ------
From "4qr1hu9n7" ***@***.***>
To "FrSkyRC/ETHOS-Feedback-Community"
***@***.***>
Cc "CaptKremen" ***@***.***>; "Author"
***@***.***>
Date 05/01/2025 13:04:57
Subject Re: [FrSkyRC/ETHOS-Feedback-Community] Loss Of Telemetry Sensors
(Issue FrSkyRC/RF_Feedback_Group#94)
X20-Pro V3.0.1, Ethos 1.6.0, TD-SR18 V3.0.1, Lua V3.0.0.
No issues.
—
Reply to this email directly, view it on GitHub
<#94>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AYZRCEAMVDHO3GFMCPYS5UL2JEUXTAVCNFSM6AAAAABUTFN4IKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNZRGYZDAMBZGI>.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Are these external sensors?
Upgrading the rx defaults the settings to s.port. If you are using fbus sensors, you will need to change the receiver to use fbus mode. |
I also have an X20-S Same firmware. All sensors and receivers work without issue. |
it works here. could you try back to 1.5.x and Tx/Rx back to the old version to seem if works? |
|
We tried to reproduce the issue on our side but failed. We would like to know which devices you have connected and how they are connected to help us reproduce the problem. |
After a (otherwise) successful update to V1.6, 3.0.1 etc. have lost LiPo and Current Sensors using first one TD SR10 Rx then tried another TD SR10. This using a X20S and then a X20RS in turn. Tried Device Config to reset ID and AppID, no luck. Re-installed Rx Firmware via cable no change. All other sensors 'discovered' and transmitting data OK. Stabilisation and other features all working OK too. Any steers what to do? How to get LiPo & Current Sensors to be discovered. Checked all cables including polarity AND these and other similar LiPo and Current sensors work perfectly with all other FrSky type of Rx e.g. TD SR6, SR6, S6R, TW. Sensor firmware also checked and are current version. Puzzled ??
The text was updated successfully, but these errors were encountered: